Stephen Horton ha scritto:
Hello folks,
In a current work project, I have inherited a compactPCI board that has
an mpc7447/7448 powerpc processor as well as a Marvell system
controller, model mv64462 (stripped down mv64460). The board has a
somewhat working Gentoo Linux port running on it from long ago and a
company far far away (kernel version 2.6.9 built using arch/ppc). To
prepare for an upcoming deployment, I would like to bring the OS
up-to-date on this board with a newer kernel (targeting Gentoo 2008),
but I am unsure of the approach to take. I am a software developer, but
normally do not work on kernel porting / board integration. I have
researched the arch/ppc to arch/powerpc migration, but I'm a bit
intimidated by the 'new' device tree symantics and other changes to the
stream. Here are some questions:
1. Is it possible with the 2.6.24 (Gentoo 2008) kernel to still use
arch/ppc for this platform architecture? I've tried to get this to
compile, but am having trouble with files from arch/powerpc getting
pulled in; then I read some comments (from I believe this forum) that
indicated that arch/ppc is not longer supposed to compile
2. Does anyone have example code for this platform architecture?
Any freebees I could use for creating my device tree?
3. Any advice of any kind?
Regards,
Stephen
------------------------------------------------------------------------
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
> 1. Is it possible with the 2.6.24 (Gentoo 2008) kernel to still use
> arch/ppc for this platform architecture? I've tried to get this to
> compile, but am having trouble with files from arch/powerpc getting
> pulled in; then I read some comments (from I believe this forum) that
> indicated that arch/ppc is not longer supposed to compile
Good idea, I suggest you to use arch/powerpc, arch/ppc won't be
supported in the future and this folder there won't be anymore!
> 2. Does anyone have example code for this platform architecture?
> Any freebees I could use for creating my device tree?
I suggest you to use, as starting point, a dts file for a board similar
to your board, I don't know if your board is somehow derived from one
evaluation board.
> 3. Any advice of any kind?
First of all read the kernel documentation about dts in the powerpc
folder. You can find in that documentation even some reference to the
open-firmware standard (IEEE 1275).
Last suggestions, I wouldn't use Gentoo Linux but a specific embedded
distribution, for example ELDK.
Regards,
--
Marco Stornelli
Embedded Software Engineer
CoRiTeL - Consorzio di Ricerca sulle Telecomunicazioni
http://www.coritel.it
[EMAIL PROTECTED]
+39 06 72582838
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
