Hello, I`m doing video=0x0... to letFB_find_mode use my default video! Yes I give you my vfb.c and .config! Thanks very much! I found that only changing the linelength, the visible resolution changes too.
Anatolij Gustschin wrote: > > Alex_SYS wrote: >> >> Alex_SYS wrote: >>> <Here is the Kernel Bootup message that it gives when it crashes! >>> >>> U-Boot 1.2.0-mpc5200b-tiny-3 (Dec 11 2007 - 11:25:01) >>> >>> CPU: MPC5200 v2.2, Core v1.4 at 399.999 MHz >>> Bus 133 MHz, IPB 133 MHz, PCI 33 MHz >>> Board: phyCORE-MPC5200B-tiny >>> I2C: ready >>> DRAM: 64 MB >>> SP: 0x03f73768 >>> FLASH: 16 MB >>> Using pcm030 machine description >>> Linux version 2.6.23.1-rt5-pcm030-1trunk ([EMAIL PROTECTED]) (gcc version >>> 4.1.2) #39 >>> 4 PREEMPT RT Tue Dec 11 17:58:48 CET 2007 >>> Zone PFN ranges: >>> DMA 0 -> 16384 >>> Normal 16384 -> 16384 >>> Movable zone start PFN for each node >>> early_node_map[1] active PFN ranges >>> 0: 0 -> 16384 >>> Real-Time Preemption Support (C) 2004-2007 Ingo Molnar >>> Built 1 zonelists in Zone order. Total pages: 16256 >>> Kernel command line: [EMAIL PROTECTED] , console=ttyPSC0,115200 > ----------------------------->^^^^^^^^^ > is this intentional? > >>> mtdparts=physmap-f >>> lash.0:256k(ubootl),1792k(kernel),13312k(jffs2),256k(uboot)ro,256k(oftree),-(spa >>> ce) rw root=/dev/mtdblock2 rootfstype=jffs2 >>> WARNING: experimental RCU implementation. >>> MPC52xx PIC is up and running! >>> PID hash table entries: 256 (order: 8, 1024 bytes) >>> Console: colour dummy device 80x25 >>> console [ttyPSC0] enabled >>> Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) >>> Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) >>> Memory: 61960k/65536k available (2624k kernel code, 3508k reserved, 144k >>> data, 1 >>> 06k bss, 124k init) >>> Mount-cache hash table entries: 512 >>> NET: Registered protocol family 16 >>> PCI: Probing PCI hardware >>> DMA: MPC52xx BestComm driver >>> DMA: MPC52xx BestComm engine @f0001200 ok ! >>> Generic PHY: Registered new driver >>> usbcore: registered new interface driver usbfs >>> usbcore: registered new interface driver hub >>> usbcore: registered new device driver usb >>> NET: Registered protocol family 2 >>> IP route cache hash table entries: 1024 (order: 0, 4096 bytes) >>> TCP established hash table entries: 2048 (order: 4, 73728 bytes) >>> TCP bind hash table entries: 2048 (order: 3, 57344 bytes) >>> TCP: Hash tables configured (established 2048 bind 2048) >>> TCP reno registered >>> JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. >>> io scheduler noop registered (default) >>> No Options from U-Boot >>> Lime Driver PROBE >>> No Mode >>> Name des Strings [EMAIL PROTECTED] with Länge 9 >>> Schleife mode Options >>> Schleife @ >>> Schleife - >>> Schleife x >>> DONE vor CVT xres= 0 , yres=0 , cvt= >>> 0****************************************** >>> ************CVT Mode: Trying specified video mode 0x0 >>> Trying mode [EMAIL PROTECTED] [EMAIL PROTECTED] >>> Error= >>> 0********************************************************************Tryi >>> ng mode noname [EMAIL PROTECTED] >>> Error= >>> 0********************************************************************Tryi >>> ng mode noname [EMAIL PROTECTED] >>> Error= >>> 0********************************************************************Tryi >>> ng mode noname [EMAIL PROTECTED] > > What arguments do you pass to fb_find_mode() in the driver? Probing all of > these modes is not necessary. > > <snip> >>> Error= >>> 0********************************************************************Tryi >>> ng default video mode >>> Trying mode noname [EMAIL PROTECTED] >>> Error= >>> 0********************************************************************Tryi >>> ng default mode >>> Console: switching to colour frame buffer device 114x34 >>> stopped custom tracer. >>> Oops: Exception in kernel mode, sig: 4 [#1] >>> PREEMPT pcm030 >>> Modules linked in: >>> NIP: 00000900 LR: c011d94c CTR: c011daf4 >>> REGS: c3fe7a30 TRAP: 0700 Not tainted (2.6.23.1-rt5-pcm030-1trunk) >>> MSR: 00081000 <ME> CR: 42042022 XER: 00000000 >>> TASK = c3fe5c00[1] 'swapper' THREAD: c3fe6000 >>> GPR00: ffffffff c3fe7ae0 c3fe5c00 c5128bfc 00000000 00010001 00000020 >>> 00000020 >>> GPR08: 00000000 00010001 ffffffff 00000020 c3f5f800 fffffffb 03fcb000 >>> ffffffff >>> GPR16: 00000001 00000000 c3fe7f78 c024a748 00000000 00000000 00000002 >>> 000001e0 >>> GPR24: 00010001 c011daf4 00000020 c3f5f800 c5128bfc 00000000 00000005 >>> 000001b0 >>> NIP [00000900] 0x900 > > Could you post your current vfb.c and .config file? > > Best Regards, > Anatolij > > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded@ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded > http://www.nabble.com/file/p18506984/vfb.c vfb.c http://www.nabble.com/file/p18506984/.config .config -- View this message in context: http://www.nabble.com/Videomode-800x480-tp18470632p18506984.html Sent from the linuxppc-embedded mailing list archive at Nabble.com. _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
