hi everybody: These days a problem drive me to read the code about mpc8247
cpm2 smc or scc uart.The problem is that, very very occasionally when my system
bring up, I find the serial port can not work. The serial port connects with
smc1 and is a console port. when the problem occured, the tx of smc1 is still
ok. I send 'break' to the port, and dump the register of smc . The indicators
of 'break' len and 'break' times show it reciverd thesignal. Catting
/proc/interrupts I find the interrupts counter do not increase.It seemed the
irq of smc disabled by systerm. Somehow, when the problem occured, there were a
lot of 'break' signal recived the serial port, maybe this is hardware
mistake.And the mistake lead the problem.
Do anyone troubled with these problem?
_________________________________________________________________
用手机MSN聊天写邮件看空间，无限沟通，分享精彩！
http://mobile.msn.com.cn/_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
