Hi Philipp, I did U-BOOT driver for emaclite. You can set both ping pong mode - all combination are supported. I tested this driver with Microblaze and works well. I use this driver almost every day and I have no problem with it. If you have problem with this driver please send your email to u-boot mailing list.
Regards, Michal > Hi all, > > I use a Xilinx Virtex-4FX (with powerpc) Board (Ml403) with U-boot and > Linux. > > I am currently wondering if someone has experience with the emaclite > driver. When I unset the "ping pong" (double buffering) parameters of > the core, I can use it unter Linux and U-boot. But the performance is > near to non-functional (wget tells me about 10kByte/sec). > Then I switched to double buffering. Now it runs very well - but only > under Linux. > > I found a driver (xilinx_emaclite.c) in the U-boot git. That completely > refuses to work correctly (of course with parameters corrected). The > other driver I once found "somewhere" (in the Petalinux distribution). > It at least worked without the double buffering. Both drivers talk about > the ping pong options in their source, so I think they *should* know > about it. > > > Does anyone know that problem? Is there an improved driver around? > > Best wishes, > > Philipp > > > > > _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
