Hi Chris,
probably there's some mismatch between the device (for example some
information in dts) and the driver. The match function scan for a driver
for those devices but the values compared don't match the values of the
drivers.
Regards.
Chris Skepper ha scritto:
Hi All,
I have an MPC8247 based board. I can get the SMC1 console working, but
the other SCCx serial ports and the FCC1 ethernet doesn't work.
It appears that a part of the problem is that the probe methods are
not called. The "match" table stuff all looks fine and the serial
ports and ethernet are defined in the .dts file. The module init
function is called, but the probe methods are not reached. It seems
driver_register gets called, so why doesn't something call probe?
Is there likely to be some problem with the bus setup?
Cheers,
Chris.
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
--
Marco Stornelli
Embedded Software Engineer
CoRiTeL - Consorzio di Ricerca sulle Telecomunicazioni
http://www.coritel.it
[EMAIL PROTECTED]
+39 06 72582838
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
