On Mon, Sep 22, 2008 at 05:37:24PM +0530, VenkataKrishna wrote: > In our target board have two banks of flash device. Which is connected two > Chip select 0(CS0) and Chip select 1 (CS1). In Hardware our target board has > specialty jumper setting change CS0 VsCS1. Booting device always connected > CS0. What is our problem is I want download my Linux uImage in one of flash > device in my board when change jumper setting in hardware the board should > be boot .Board is Powerpc based processor (MPC8260). Any one suggest me > what can I do. Where can I initialization memory device.
You need to put a u-boot (or other firmware) image in each bank. -Scott _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
