I have a 460GT based system with three ethernet interfaces, and I don't seem to be able to bring up EMAC2 in RGMII mode. The PHY works just fine, the counterpart on the other side of the serdes link autonegotiates successfully, etc. When I attempt to send something from the interface though, nothing shows up on the RGMII lines (I use a scope to probe it). The received traffic is passed from the PHY to the MAC, but again, nothing is reported by the rx driver.
I am using the latest released code from 2.6.26.5 (I started with 2.6.25 release, and in that case just EMAC0 worked, updgrading to to 2.6.26.5 made the second interface work, but the third one seems to be stuck. I see that the Denx tree has a lot of changes in the driver, but it is not as cleanly portable, so advancing there is not an option. I am trying to debug it, but am wondering if anyone had more than two interfaces going on this architecture and if so - what are the gotchas. Any hints will be highly appreciated, cheers, VadimB _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
