Alemao wrote:
Here is an output from someone using it:
-----
070500 U-Boot 1.1.2 (May 30 2007 - 20:20:09)
Motorola PowerPC
Board: GDA Technologies CSC-PP MPC8560 [PowerQUICC III]
CPU: 660 MHz
CCB: 330 MHz
DDR: 165 MHz
Creating 7 MTD partitions on "CSC flash":
0x00f80000-0x01000000 : "uboot"
0x00d00000-0x00e00000 : "kernel0"
0x00e00000-0x00f00000 : "kernel1"
0x00700000-0x00d00000 : "app"
0x00000000-0x00380000 : "root0"
0x00380000-0x00700000 : "root1"
0x00f00000-0x00f80000 : "env"
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xca
Scanning device for bad blocks
Bad eraseblock 1780 at 0x0de80000
Creating 1 MTD partitions on "NAND 256MiB 3,3V 16-bit":
0x00000000-0x10000000 : "NAND Partition"
-----
Thats exactly what I want to do. If you say not to use physmap with
NAND, how he is doing this? Through the device tree source?
I see nothing in that output to suggest that physmap is being used for NAND.
NAND is not directly mapped like NOR is; you cannot just give an address
range with no knowledge of the controller and expect it to work.
Note that if you look in drivers/mtd/maps/physmap.c, the supported probe
types are CFI, JEDEC, and ROM.
-Scott
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
