On Sat, Aug 16, 2008 at 04:32:01AM +0200, Wolfram Sang wrote:
> Read & write functions now call a generic transfer function, so identical
> code in both routines could be eliminated. The result is easier to maintain
> and smaller in source and binary code. Also, fix some checkpatch warnings.

This looks good.  I'll pick it up.

g.

> 
> Signed-off-by: Wolfram Sang <[EMAIL PROTECTED]>
> ---
>  drivers/net/fec_mpc52xx_phy.c |   55 
> ++++++++++++++++--------------------------
>  1 file changed, 22 insertions(+), 33 deletions(-)
> 
> Index: .kernel/drivers/net/fec_mpc52xx_phy.c
> ===================================================================
> --- .kernel.orig/drivers/net/fec_mpc52xx_phy.c
> +++ .kernel/drivers/net/fec_mpc52xx_phy.c
> @@ -2,6 +2,7 @@
>   * Driver for the MPC5200 Fast Ethernet Controller - MDIO bus driver
>   *
>   * Copyright (C) 2007  Domen Puncer, Telargo, Inc.
> + * Copyright (C) 2008  Wolfram Sang, Pengutronix
>   *
>   * This file is licensed under the terms of the GNU General Public License
>   * version 2. This program is licensed "as is" without any warranty of any
> @@ -21,58 +22,45 @@
>       struct mpc52xx_fec __iomem *regs;
>  };
>  
> -static int mpc52xx_fec_mdio_read(struct mii_bus *bus, int phy_id, int reg)
> +static int mpc52xx_fec_mdio_transfer(struct mii_bus *bus, int phy_id,
> +             int reg, u32 value)
>  {
>       struct mpc52xx_fec_mdio_priv *priv = bus->priv;
>       struct mpc52xx_fec __iomem *fec;
>       int tries = 100;
> -     u32 request = FEC_MII_READ_FRAME;
> +
> +     value |= (phy_id << FEC_MII_DATA_PA_SHIFT) & FEC_MII_DATA_PA_MSK;
> +     value |= (reg << FEC_MII_DATA_RA_SHIFT) & FEC_MII_DATA_RA_MSK;
>  
>       fec = priv->regs;
>       out_be32(&fec->ievent, FEC_IEVENT_MII);
> -
> -     request |= (phy_id << FEC_MII_DATA_PA_SHIFT) & FEC_MII_DATA_PA_MSK;
> -     request |= (reg << FEC_MII_DATA_RA_SHIFT) & FEC_MII_DATA_RA_MSK;
> -
> -     out_be32(&priv->regs->mii_data, request);
> +     out_be32(&priv->regs->mii_data, value);
>  
>       /* wait for it to finish, this takes about 23 us on lite5200b */
>       while (!(in_be32(&fec->ievent) & FEC_IEVENT_MII) && --tries)
>               udelay(5);
>  
> -     if (tries == 0)
> +     if (!tries)
>               return -ETIMEDOUT;
>  
> -     return in_be32(&priv->regs->mii_data) & FEC_MII_DATA_DATAMSK;
> +     return value & FEC_MII_DATA_OP_RD ?
> +             in_be32(&priv->regs->mii_data) & FEC_MII_DATA_DATAMSK : 0;
>  }
>  
> -static int mpc52xx_fec_mdio_write(struct mii_bus *bus, int phy_id, int reg, 
> u16 data)
> +static int mpc52xx_fec_mdio_read(struct mii_bus *bus, int phy_id, int reg)
>  {
> -     struct mpc52xx_fec_mdio_priv *priv = bus->priv;
> -     struct mpc52xx_fec __iomem *fec;
> -     u32 value = data;
> -     int tries = 100;
> -
> -     fec = priv->regs;
> -     out_be32(&fec->ievent, FEC_IEVENT_MII);
> -
> -     value |= FEC_MII_WRITE_FRAME;
> -     value |= (phy_id << FEC_MII_DATA_PA_SHIFT) & FEC_MII_DATA_PA_MSK;
> -     value |= (reg << FEC_MII_DATA_RA_SHIFT) & FEC_MII_DATA_RA_MSK;
> -
> -     out_be32(&priv->regs->mii_data, value);
> -
> -     /* wait for request to finish */
> -     while (!(in_be32(&fec->ievent) & FEC_IEVENT_MII) && --tries)
> -             udelay(5);
> -
> -     if (tries == 0)
> -             return -ETIMEDOUT;
> +     return mpc52xx_fec_mdio_transfer(bus, phy_id, reg, FEC_MII_READ_FRAME);
> +}
>  
> -     return 0;
> +static int mpc52xx_fec_mdio_write(struct mii_bus *bus, int phy_id, int reg,
> +             u16 data)
> +{
> +     return mpc52xx_fec_mdio_transfer(bus, phy_id, reg,
> +             data | FEC_MII_WRITE_FRAME);
>  }
>  
> -static int mpc52xx_fec_mdio_probe(struct of_device *of, const struct 
> of_device_id *match)
> +static int mpc52xx_fec_mdio_probe(struct of_device *of,
> +             const struct of_device_id *match)
>  {
>       struct device *dev = &of->dev;
>       struct device_node *np = of->node;
> @@ -121,7 +109,8 @@
>       dev_set_drvdata(dev, bus);
>  
>       /* set MII speed */
> -     out_be32(&priv->regs->mii_speed, ((mpc52xx_find_ipb_freq(of->node) >> 
> 20) / 5) << 1);
> +     out_be32(&priv->regs->mii_speed,
> +             ((mpc52xx_find_ipb_freq(of->node) >> 20) / 5) << 1);
>  
>       err = mdiobus_register(bus);
>       if (err)
> 
> -- 
>   Dipl.-Ing. Wolfram Sang | http://www.pengutronix.de
>  Pengutronix - Linux Solutions for Science and Industry
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

Reply via email to