I am using the MPC8313E-RDB and I am having some problems using the flash that comes on the board. Let me preface this by saying that I haven't worked in the embedded linux arena in about 10 years so I am trying to catch up with all the new toys.

This board uses uBoot and it currently has 128M of DDR2, 8M flash and 32M NAND Flash. I have a few questions:

How can I tell which memory device it uses to boot out of?
How can I tell which devices are mapped to /proc/mtd devices?


I want to create a writeable flash partition, is there a FAQ out there I could look at.

All of this is after a few days of using Google to try and glean some data from the internet. And the books don't get here from Amazon until Monday.

I would appreciate any help. Even a RTFM - if you could point me to TFM, it would greatly help.
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

Reply via email to