Norbert van Bolhuis wrote: > > Thanks for the answer, but that's not it. > > I checked the jiffies variable, it increases about 250 times > per second. > So the (mpc83xx_defconfig) kernel perception (#define CONFIG_HZ 250) > is OK. > > It must be something else, I still think 83.20 BogoMIPS > can't be correct for a MPC8313 running at 333 MHz. > > > Alessandro Rubini wrote: >>> This is what a linux-2.6.x reports (for the MPC8313E running at 333 >>> MHz): >>> Calibrating delay loop... 83.20 BogoMIPS (lpj=166400)
I never been worried for the BogoMIPS, but actually my board (custom one) report: Calibrating delay loop... 66.56 BogoMIPS (lpj=133120) The core is running at 333MHz also, but what make my focus is the result of calibrating: 66.56. The main oscillator on my board is 66MHz!? Is the main oscillator on your board 83.3MHz? BTW. I'm using older kernel 2.6.20 with patches from freescale. Regards _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded