Carlos Roberto Moratelli wrote:
Hi,
Hi Carlos,
I am working in a custom board based on a mpc8313erdb and my Kernel
version is 2.6.24. This board has a Marvell PHY 88E1112 on TSEC2
processor port.
The problem is that the PHY is detected and configured, but no data can
be send or received. I am sure that dtb is fine. In another custom board
I have a 88e3015 on TSEC2 and it is working fine.
Did someone work with this PHY? Does Compiling gianfar and Marvell
support on Kernel is enough?
We have a board using a 8641d and Marvel 88E1111 PHY. I had problems getting
the PHY to work correctly when using the Marvell PHY driver, however we were
using the PHY as a standard PHY and found that the generic PHY driver worked
just fine. Have you tried it without enabling the Marvell PHY driver so it uses
the generic one?
Martyn
--
Martyn Welch MEng MPhil MIET (Principal Software Engineer) T:+44(0)1327322748
GE Fanuc Intelligent Platforms Ltd, |Registered in England and Wales
Tove Valley Business Park, Towcester, |(3828642) at 100 Barbirolli Square,
Northants, NN12 6PF, UK T:+44(0)1327359444 |Manchester,M2 3AB VAT:GB 729849476
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
