I have linux 2.6 running on the xupv2p with uart and ethernet. Also, I have linux 2.6 running with uart, sysace and ethernet. You can find here: https://rm-rfroot.net/xupv2p/ useful instructions to port linux 2.4 to the xupv2p board.
Juliana Su wrote: > > Hi, > > I'm relatively new to the XUPV2P. Up until about a month ago, I had been > working with an ML310. Anyway, I noticed the “XUPV2P update to kernel > 2.6 fails” thread and saw that quite a few people have been successful > with the XUPV2P; I was hoping that those of you who have been successful > with the XUPV2P could help me out. > > First some background... > > I am using EDK 9.1, EDK 10.1, the MontaVista Linux 2.4 kernel > (linuxppc_2_4_devel), and a 256 MB DDR DIMM. I was able to get a basic > system (XPS UART16550, DDR SDRAM - MPMC, XPS SYSACE, Linux 2.4) made in > EDK 10.1 to work. However, I have not had any success getting a similar > system (UART16550, DDR_SDRAM_32Mx64 - PLB DDR, OPB SYSACE, Linux 2.4) > built in EDK 9.1 to work. The issue is that, when I turn on the board, > nothing shows up in minicom. I checked the contents of the log_buf; it > was filled with junk. > > My goal is a system with SysACE support, Ethernet, and the AC-97 audio > CODEC that can mount a hard drive. It seems like it would be easier to > create this system using EDK 9.1 than EDK 10.1. Right now, though, just > getting a basic system to work using EDK 9.1 would be great. > > For those of you who have been successful with the XUPV2P, what > configurations in the EDK 9.1 Base System Builder Wizard and what Linux > kernel worked for you? Any suggestions as to why I might not be getting > any output? Would it be possible for me to use Linux 2.6 or should I > stick with Linux 2.4? (I feel like Linux 2.4 would be better, but I > thought I would ask anyway.) Also, are there any known issues with EDK > 9.1 and the XUPV2P? I vaguely remember reading about memory issues > somewhere, but I can’t remember if they were related to EDK 9.1, EDK > 10.1, or both. > > Let me know if I should provide any additional information. Thanks! > > > -Juliana > > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded@ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded > > -- View this message in context: http://www.nabble.com/XUPV2P-%2B-EDK-9.1-%2B-Linux-2.4-tp20969433p20976787.html Sent from the linuxppc-embedded mailing list archive at Nabble.com. _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded