Before releasing v1.5, I wanted to test phc2sys's new automatic mode in order to run a BC using a bunch of PCIe cards, but I found it did not quite work. First of all, the port logic bails out when the PHC device don't match, and secondly phc2sys has one line bug.
After hacking those two problems away, the BC worked okay. With a GM-BC-slave setup, the slave had about an additional 9 usec offset. I made the "jbod" a non-default option, so that users who want this really know not to expect perfect performance. After this series and the SO_SELECT_ERR_QUEUE get settled, I will release the 1.5 version. Feedback is most welcome. Thanks, Richard Richard Cochran (3): config: add a option to enable a poor man's boundary clock. port: allow running a boundary clock with multiple clock devices. phc2sys: make automatic mode actually work. config.c | 13 +++++++++++++ config.h | 1 + default.cfg | 1 + ds.h | 1 + gPTP.cfg | 1 + phc2sys.c | 1 - port.c | 6 +++++- ptp4l.8 | 12 +++++++++++- ptp4l.c | 1 + 9 files changed, 34 insertions(+), 3 deletions(-) -- 1.7.10.4 ------------------------------------------------------------------------------ _______________________________________________ Linuxptp-devel mailing list Linuxptp-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linuxptp-devel
