Looks good here too. Seems we got the two backwards. Regards, Jake
On Wed, 2015-06-03 at 09:20 +0200, zmoel...@iem.at wrote: > From: IOhannes m zmölnig <zmoel...@umlautq.umlaeute.mur.at> > > in manpages, the '-' denotes a hyphen. > for a proper minus, we need to write '\-' > --- > ptp4l.8 | 6 +++--- > timemaster.8 | 16 ++++++++-------- > 2 files changed, 11 insertions(+), 11 deletions(-) > > diff --git a/ptp4l.8 b/ptp4l.8 > index fd00ea3..caeb805 100644 > --- a/ptp4l.8 > +++ b/ptp4l.8 > @@ -1,6 +1,6 @@ > .TH PTP4l 8 "December 2014" "linuxptp" > .SH NAME > -ptp4l \- PTP Boundary/Ordinary Clock > +ptp4l - PTP Boundary/Ordinary Clock > > .SH SYNOPSIS > .B ptp4l > @@ -170,7 +170,7 @@ The default is 0 (disabled). > .B fault_reset_interval > The time in seconds between the detection of a port's fault and the fault > being reset. This value is expressed as a power of two. Setting this > -value to -128 or to the special key word "ASAP" will let the fault be > +value to \-128 or to the special key word "ASAP" will let the fault be > reset immediately. > The default is 4 (16 seconds). > .TP > @@ -350,7 +350,7 @@ The default is 0.0. > .B pi_proportional_exponent > The kp_exponent constant in the formula used to set the proportional > constant of > the PI controller from the sync interval. > -The default is -0.3. > +The default is \-0.3. > .TP > .B pi_proportional_norm_max > The kp_norm_max constant in the formula used to set the proportional > constant of > diff --git a/timemaster.8 b/timemaster.8 > index 062322b..4da4299 100644 > --- a/timemaster.8 > +++ b/timemaster.8 > @@ -1,7 +1,7 @@ > .TH TIMEMASTER 8 "October 2014" "linuxptp" > .SH NAME > > -timemaster \- run NTP with PTP as reference clocks > +timemaster - run NTP with PTP as reference clocks > > .SH SYNOPSIS > > @@ -138,7 +138,7 @@ default value is 0 (1 second). > Specify the maximum assumed roundtrip delay to the primary source of the time > in this PTP domain. This value is included in the distance used by > \fBchronyd\fR in the source selection algorithm to detect falsetickers and > -assign weights for source combining. The default value is 1e-4 (100 > +assign weights for source combining. The default value is 1e\-4 (100 > microseconds). With \fBntpd\fR, the \fBtos mindist\fR command can be used to > set a limit with similar purpose globally for all time sources. > > @@ -209,7 +209,7 @@ Specify the path to the \fBphc2sys\fR binary. The default > value is > .TP > .B options > Specify extra options that should be added to all \fBphc2sys\fR command > lines. > -By default, \fB-l 5\fR is added to the command lines. > +By default, \fB\-l 5\fR is added to the command lines. > > .SS [ptp4l] > > @@ -221,7 +221,7 @@ search for the binary in \fBPATH\fR. > .TP > .B options > Specify extra options that should be added to all \fBptp4l\fR command lines. > By > -default, \fB-l 5\fR is added to the command lines. > +default, \fB\-l 5\fR is added to the command lines. > > .SS [ptp4l.conf] > Settings specified in this section are copied directly to the configuration > @@ -288,8 +288,8 @@ iburst 1 > [ptp_domain 0] > interfaces eth0 eth1 > ntp_poll 0 > -phc2sys_poll -2 > -delay 10e-6 > +phc2sys_poll \-2 > +delay 10e\-6 > ptp4l_option clock_servo linreg > ptp4l_option delay_mechanism P2P > > @@ -309,7 +309,7 @@ driftfile /var/lib/chrony/drift > > [ntpd] > path /usr/sbin/ntpd > -options -u ntp:ntp > +options \-u ntp:ntp > > [ntp.conf] > restrict default nomodify notrap nopeer noquery > @@ -319,7 +319,7 @@ driftfile /var/lib/ntp/drift > > [phc2sys] > path /usr/sbin/phc2sys > -options -l 5 > +options \-l 5 > > [ptp4l] > path /usr/sbin/ptp4l ------------------------------------------------------------------------------ _______________________________________________ Linuxptp-devel mailing list Linuxptp-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linuxptp-devel
