I have a system with two network ports running PTPv2/IPv6 (boundary
clock) and I'm using phc2sys (v1.8) to synchronize the the two PHC
devices associated with each ethernet port (JBOD enabled). I also want
the system clock (CLOCK_REALTIME) synchronized to one of the PHC
devices. I'm running phc2sys as follows:
phc2sys -a -r
The issue I'm experiencing is that when both of the PTP ports are in
modes (both are in PTP state MASTER) that disqualifies them as the
"master" in phc2sys, the system clock is not synchronized to whichever
PHC device phc2sys chooses as the "master" PHC device under these
conditions. E.G. Phc2sys is synchronizing PHC device X to PHC device Y
(as is expected) but the system clock (CLOCK_REALTIME) is not being
synchronized at all in this case. Is this a bug or is this how phc2sys
is intended to work? Thank you for any thoughts you care to provide.
Mike
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Linuxptp-devel mailing list
Linuxptp-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linuxptp-devel
