On Fri, Jul 21, 2017 at 04:38:17PM -0400, Kin Man wrote: > I have compiled the Linux PTP project v 1.7 and compiled the ptp4l and > phc2sys apps. The ptp4l seems to work fine between the master (a Linux > machine) and slave (my Xilinx Zynq board), but the phcsys seems not to work > properly, as the phc offset keep increasing and it pop out the failed to > adjust the clock message. > > When we used the Xilinx board as master and use the Linux machine as slave, > then phc2sys is fine. while we are trying to debug the problem, we noticed > the argument to the function clock_adjtime(clkid, &tx) seems to be the same > between the working and the non-working case, therefore, we are wondering > if something wrong with the clock_adjtime function. Any advice will be > helpful.
Is this a mainline Linux kernel, or is it a vendor kernel? Thanks, Richard ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Linuxptp-users mailing list Linuxptp-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linuxptp-users
