Hi Richard, 

Hereby the following information.

# ethtool -i enp0s25
driver: e1000e
version: 3.2.6-k
firmware-version: 0.13-3
bus-info: 0000:00:19.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: no

# ethtool -T enp0s25
Time stamping parameters for enp0s25:
Capabilities:
        hardware-transmit               (SOF_TIMESTAMPING_TX_HARDWARE)
        software-transmit               (SOF_TIMESTAMPING_TX_SOFTWARE)
        hardware-receive                (SOF_TIMESTAMPING_RX_HARDWARE)
        software-receive                (SOF_TIMESTAMPING_RX_SOFTWARE)
        software-system-clock   (SOF_TIMESTAMPING_SOFTWARE)
        hardware-raw-clock              (SOF_TIMESTAMPING_RAW_HARDWARE)
PTP Hardware Clock: 4
Hardware Transmit Timestamp Modes:
        off                                     (HWTSTAMP_TX_OFF)
        on                                      (HWTSTAMP_TX_ON)
Hardware Receive Filter Modes:
        none                            (HWTSTAMP_FILTER_NONE)
        all                                     (HWTSTAMP_FILTER_ALL)
        ptpv1-14-sync                   (HWTSTAMP_FILTER_PTP_V1_L4_SYNC)
        ptpv1-14-delay-req              (HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ)
        ptpv2-14-sync                   (HWTSTAMP_FILTER_PTP_V2_L4_SYNC)
        ptpv2-14-delay-req              (HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ)
        ptpv2-12-sync                   (HWTSTAMP_FILTER_PTP_V2_L2_SYNC)
        ptpv2-12-delay-req              (HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ)
        ptpv2-event                     (HWTSTAMP_FILTER_PTP_V2_EVENT)
        ptpv2-sync                      (HWTSTAMP_FILTER_PTP_V2_SYNC)
        ptpv2-delay-req         (HWTSTAMP_FILTER_PTP_V2_DELAY_REQ)


Kind regards,
Jord
        

> On 14 Jun 2018, at 16:56, Richard Cochran <richardcoch...@gmail.com> wrote:
> 
> On Thu, Jun 14, 2018 at 11:49:44AM +0000, Jord Pool wrote:
> 
>> What is the reason that I am unable to synchronise enp0s25 to the
>> system clock? And what is the reason that /dev/ptp0 does synchronise
>> to the system clock properly? And what is the reason that /dev/ptp0
>> is not linked to enp0s25? Can I link /dev/ptp0 manually to enp0s25
>> or?
> 
> Please show us:
> 
> ethtool -i enp0s25
> 
> ethtool -T enp0s25
> 
> Thanks,
> Richard


------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Linuxptp-users mailing list
Linuxptp-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linuxptp-users

Reply via email to