On Mon, Feb 10, 2020 at 05:51:07PM +0000, Alberto Dias wrote: > I configured the eth0.0 interface of the Master device with IP > 192.168.4.100/24
... > Then I run the ptp4l process with the following arguments: > > ptp4l -E -4 -H -f /etc/default.cfg -i eth0_0 -l 6 eth0.0 != eth0_0 > When I start the Calnex Slave and capture packets exchanged I see > only "Delay Request" and "Delay Response" Unicast packets. "Sync" > and "Announce" packets are not transmitted by the device running > ptpt4l. Does the Calnex device subscribe to the those packets using unicast negotiation? If not, then nothing will be sent. > If I add a "[unicast_slave_table]" to "default.cfg" like this: There is no unicast_slave_table, but there is a unicast_master_table. HTH, Richard _______________________________________________ Linuxptp-users mailing list Linuxptp-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linuxptp-users
