>>>> b) Is there some way out of this? >> Buy a real PTP switch, or configure it properly, or make your own using linuxptp in TC mode on the management interface.
I am using ATOP Technologies EHG7504 industrial managed ethernet switch and in PTP configuration I have set clock mode to PTP-TC already. If I don't do that, even a single sensor interface does not work. But the issue I have is that the single-sensor interface works absolutely fine, but as soon as I have more than one sensor connected via the same switch, this multi-sensor interface does not. I am also using separate VLANs for each sensor in order to avoid cross-talk. Any recommendations on PTP switch? VM On Fri, Oct 2, 2020 at 8:13 AM Richard Cochran <richardcoch...@gmail.com> wrote: > On Thu, Oct 01, 2020 at 05:38:44PM -0700, Vikalp Mishra wrote: > > 4) I am using a switch to connect all sensors to my laptop, with PTP > > enabled in switch and it being in P2P-TC mode > > hahaha, don't make me laugh ... > > > a) So what am I doing wrong here? > > Maybe your switch is a piece of junk? > > > b) Is there some way out of this? > > Buy a real PTP switch, or configure it properly, or make your own > using linuxptp in TC mode on the management interface. > > > c) I looked into the code and it seems these messages are coming from > > port.c , function process_pdelay_resp(). I can overcome this issue if I > > make some modifications like that shown below, but is this acceptable or > ok > > to do? > > Totally Unacceptable. > > Sorry, > > Richard > -- Vikalp
_______________________________________________ Linuxptp-users mailing list Linuxptp-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linuxptp-users
