> -----Original Message-----
> From: Richard Cochran [mailto:[email protected]]
> Sent: Tuesday, December 08, 2020 8:45 PM
> To: pavan-lakote
> Cc: [email protected]
> Subject: Re: [Linuxptp-users] switchover fails when having multiple
unicast
> master
>
> On Tue, Dec 08, 2020 at 11:03:50AM +0800, pavan-lakote wrote:
> > Hi Richard,
> >
> > Looks like the patch works fine. With this patch irrespective of port
state
> > if BMCA selects new master it will trigger unicast state change, well
port
> > state change will still trigger unicast state change.
>
> Okay, then I'll prepare a fix. Do you mind if I credit your work in the
> commit message with these tags?
>
> Reported-by: pavan-lakote <[email protected]>
> Tested-by: pavan-lakote <[email protected]>
>
Not at all.
>
> > It would be good if the ptp4l can support service(sync and delay)
cancelling
>
> To be clear, canceling would be something new, and
Yes.
>
> > and service(sync and delay) request when switching between the masters.
>
> this already works, right?
Yes, this function is already present. Reason to mention this was to show
the overall slave function working.
Regards,
Pavan Lakote
>
> Thanks,
> Richard
Loop Telecommunication International
Loop-V4150
DS0 Cross Connect Multiplexer supports up to 504E1/672T1 worth of DS0
non-blocking cross connect matrix. The V4150 DS0 Cross Connect System can
provide users with the high-density capacity up to 504 E1/T1, 24 T3MX3, or 8
STM-1 (OC-3). All interfaces are fully compliant for use with the relevant ETSI
standards and ITU recommendations. In addition, Loop-V4150 with E1/T1 cards,
through the protection relay shelf, is able to perform 1+1, 1:N and 1:1
redundancy switching to ensure the high-availability circuit system.
For further arrangement and more information, please contact Loop Telecom.
_______________________________________________
Linuxptp-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/linuxptp-users
