> ptp4l[484.261]: port 1 (enp3s0): new foreign master 0001c0.fffe.1a3cda-1 > ptp4l[488.262]: selected best master clock 0001c0.fffe.1a3cda > ptp4l[488.262]: foreign master not using PTP timescale > ptp4l[488.262]: port 1 (enp3s0): LISTENING to UNCALIBRATED on RS_SLAVE > ptp4l[490.263]: master offset -37039670930503 s0 freq -0 path delay 229600 > > ptp4l[17805.578]: port 1 (enp3s0): new foreign master 0001c0.fffe.1a3e8e-1 > ptp4l[17809.579]: selected best master clock 0001c0.fffe.1a3e8e > ptp4l[17809.579]: foreign master not using PTP timescale > ptp4l[17809.579]: port 1 (enp3s0): LISTENING to UNCALIBRATED on RS_SLAVE > ptp4l[17810.584]: master offset 159453 s0 freq +100000000 path delay 216530 >
Where does that initial freq value come from? Is it possible to force it to +0 like in the log of the first run above, the one that synchronizes? If the latter is possible, but requires code change to be tested, where should I look at in the source code?
_______________________________________________ Linuxptp-users mailing list Linuxptp-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linuxptp-users
