Hi everyone,
I'm running (and have been running) a stock kernel on an R3000 with
Ubuntu for quite some time without any trouble. I've encountered some
trouble in compiling my own kernel in order to use suspend2.
I've compiled kernels before, and don't have any trouble with that part
of it, but I get some strange messages on booting. (see the end of this
message for the start of the output from dmesg). I've read the
information online regarding the pci/cardbus stuff, but I've modified
config.opts without success. Is this issue related? I'm trying to use a
2.6.15.1 kernel, and I've used my own configuration, one from another
R3000 user's website, and the wonderfully-working config that Ubuntu so
kindly set up for me. Same result either way.
Please let me know if you have any ideas! Thanks.
Tom
ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *0, disabled.
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
agpgart: Detected AGP bridge 0
agpgart: Setting up Nforce3 AGP.
agpgart: AGP aperture is 128M @ 0xe8000000
PCI-DMA: Disabling IOMMU.
PCI: Failed to allocate mem resource #10:[EMAIL PROTECTED] for 0000:02:04.0
PCI: Failed to allocate mem resource #10:[EMAIL PROTECTED] for 0000:02:04.1
PCI: Bus 3, cardbus bridge: 0000:02:04.0
IO window: 00003000-000030ff
IO window: 00003400-000034ff
PREFETCH window: 30000000-31ffffff
PCI: Bus 7, cardbus bridge: 0000:02:04.1
IO window: 00003800-000038ff
IO window: 00003c00-00003cff
PREFETCH window: 32000000-33ffffff
PCI: Bridge: 0000:00:0a.0
IO window: 3000-7fff
MEM window: e0100000-e17fffff
PREFETCH window: 30000000-33ffffff
PCI: Bridge: 0000:00:0b.0
IO window: disabled.
MEM window: e2000000-e2ffffff
PREFETCH window: f0000000-f80fffff
PCI: Setting latency timer of device 0000:00:0a.0 to 64
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 19
GSI 16 sharing vector 0xB1 and IRQ 16
ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNK1] -> GSI 19 (level,
low) -> IRQ 16
ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 18
GSI 17 sharing vector 0xB9 and IRQ 17
ACPI: PCI Interrupt 0000:02:04.1[B] -> Link [LNK2] -> GSI 18 (level,
low) -> IRQ 17
_______________________________________________
Linuxr3000 mailing list
[email protected]
http://mail.kdewebdev.org/mailman/listinfo/linuxr3000
