Hi all, Using linuxsampler with alsa driver I encounter glitchs which I suppose are related to buffer_size but while trying to tune it with following >SET AUDIO_OUTPUT_DEVICE_PARAMETER 0 FRAGMENTSIZE=1024 LS answers >Device parameter is read only
but this does not seems to be hardcoded in alsa drivers itself, as if I check $ cat /proc/asound/M66/pcm0p/sub0/* while running "aplay" I get the following $ format: S32_LE $ subformat: STD $ channels: 10 $ rate: 48000 (48000/1) $ period_size: 1024 $ buffer_size: 6553 but while running "linuxsampler" it goes back to smaller value and reported as "read only" $ format: S32_LE $ subformat: STD $ channels: 10 $ rate: 44100 (44100/1) $ period_size: 128 $ buffer_size: 256 So it should be possible some how to modify this parameter I suspect LS implementation of alsa API does not enables tuning of these parameters. Am I right ? If so would anyone would have any suggestion to fix this ? I run a debian with kernel 3.2.0-4-amd64, an MAUDIO 66, with LS svn source from 1st of June Thanx a tons for your help BTW linuxsampler rocks a lot, I can now play rhodes and grand piano on my Venom ... event if it glitches a bit :) ------------------------------------------------------------------------------ Slashdot TV. Video for Nerds. Stuff that matters. http://tv.slashdot.org/ _______________________________________________ Linuxsampler-devel mailing list Linuxsampler-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linuxsampler-devel
