Hi Maynard, We have a fix for that under review with some other UI changes for operf/opcontrol in https://git.eclipse.org/r/#/c/21217/ Please wait until the review is finished and Ill reply for you so that you can test it. Please feel free to open a bug.
Kind regards, Rodrigo. On Fri, 31 Jan 2014 11:12:35 -0600 Maynard Johnson <mayna...@us.ibm.com> wrote: > Hi, again, > I'm seeing a problem involving unit masks on a RHEL 6.4/Sandybridge, > using the OProfile plug-in on Kepler (version of the OProfile Core > Plug-in is 2.0.0.201309171939). With 'operf' selected as the > profiling tool in the Profiling Tools Configuration, any attempt to > select anything but the default unit mask (which is always the first > in the list) doesn't work. The dialog allows me to check a box for a > non-default unit mask and click the "Apply" and "Profile" buttons, > but the resulting profile data is still for the default unit mask > (which can be seen by manually running 'opreport' in the project > directory where the oprofile_data session dir resides). I'm not sure > if this is the same root cause, but you can see what appears to be > the same issue even without profiling by doing the following: 1. Go > into Profiling Tools Configuration, select something other than the > first unit mask for some event. 2. Press "Apply" and "Close". 3. Now > go back again to look at the Profile Configuration, click on the > event you had configured previously, and you'll see the first unit > mask is checked -- i.e., you've lost the unit mask selection you made > previously. > > Additionally, after you've done step 3 above, you can't always > successfully select some other unit masks (i.e., you can check the > box, but then the "Apply" button is grey'ed out). I haven't exactly > figured out the pattern, but if you select the last unit mask, hit > "Apply" and "Close", then go back to Profile Configurations (and the > unit mask selected will now be the first one), attempting to > re-select the last unit mask won't be possible because the "Apply" > button gets grey'ed out. > > Thanks in advance for your support. > > -Maynard > > _______________________________________________ > linuxtools-dev mailing list > linuxtools-dev@eclipse.org > https://dev.eclipse.org/mailman/listinfo/linuxtools-dev > _______________________________________________ linuxtools-dev mailing list linuxtools-dev@eclipse.org https://dev.eclipse.org/mailman/listinfo/linuxtools-dev
