The patch number 8421 was added via Mauro Carvalho Chehab <[EMAIL PROTECTED]>
to http://linuxtv.org/hg/v4l-dvb master development tree.
Kernel patches in this development tree may be modified to be backward
compatible with older kernels. Compatibility modifications will be
removed before inclusion into the mainstream Kernel
If anyone has any objections, please let us know by sending a message to:
[EMAIL PROTECTED]
------
From: Igor M Liplianin <[EMAIL PROTECTED]>
Adds support for Dvbworld DVB-S 2102 USB card
Signed-off-by: Igor M Liplianin <[EMAIL PROTECTED]>
Signed-off-by: Mauro Carvalho Chehab <[EMAIL PROTECTED]>
---
linux/drivers/media/dvb/dvb-usb/Kconfig | 8
linux/drivers/media/dvb/dvb-usb/Makefile | 3
linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 1
linux/drivers/media/dvb/dvb-usb/dw2102.c | 425 ++++++++++++++++++
linux/drivers/media/dvb/dvb-usb/dw2102.h | 9
linux/drivers/media/dvb/frontends/z0194a.h | 97 ++++
6 files changed, 543 insertions(+)
diff -r a609b798c204 -r 2a87f885fc36 linux/drivers/media/dvb/dvb-usb/Kconfig
--- a/linux/drivers/media/dvb/dvb-usb/Kconfig Sun Jul 20 00:37:25 2008 -0300
+++ b/linux/drivers/media/dvb/dvb-usb/Kconfig Sun Jul 20 08:05:50 2008 -0300
@@ -246,6 +246,14 @@ config DVB_USB_AF9005_REMOTE
Say Y here to support the default remote control decoding for the
Afatech AF9005 based receiver.
+config DVB_USB_DW2102
+ tristate "DvbWorld 2102 DVB-S USB2.0 receiver"
+ depends on DVB_USB
+ select DVB_STV0299 if !DVB_FE_CUSTOMISE
+ select DVB_PLL if !DVB_FE_CUSTOMISE
+ help
+ Say Y here to support the DvbWorld 2102 DVB-S USB2.0 receiver.
+
config DVB_USB_ANYSEE
tristate "Anysee DVB-T/C USB2.0 support"
depends on DVB_USB
diff -r a609b798c204 -r 2a87f885fc36 linux/drivers/media/dvb/dvb-usb/Makefile
--- a/linux/drivers/media/dvb/dvb-usb/Makefile Sun Jul 20 00:37:25 2008 -0300
+++ b/linux/drivers/media/dvb/dvb-usb/Makefile Sun Jul 20 08:05:50 2008 -0300
@@ -64,6 +64,9 @@ dvb-usb-anysee-objs = anysee.o
dvb-usb-anysee-objs = anysee.o
obj-$(CONFIG_DVB_USB_ANYSEE) += dvb-usb-anysee.o
+dvb-usb-dw2102-objs = dw2102.o
+obj-$(CONFIG_DVB_USB_DW2102) += dvb-usb-dw2102.o
+
EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
# due to tuner-xc3028
EXTRA_CFLAGS += -Idrivers/media/common/tuners
diff -r a609b798c204 -r 2a87f885fc36
linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
--- a/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h Sun Jul 20 00:37:25
2008 -0300
+++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h Sun Jul 20 08:05:50
2008 -0300
@@ -204,5 +204,6 @@
#define USB_PID_ASUS_U3000 0x171f
#define USB_PID_ASUS_U3100 0x173f
#define USB_PID_YUAN_EC372S 0x1edc
+#define USB_PID_DW2102 0x2102
#endif
diff -r a609b798c204 -r 2a87f885fc36 linux/drivers/media/dvb/dvb-usb/dw2102.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/linux/drivers/media/dvb/dvb-usb/dw2102.c Sun Jul 20 08:05:50 2008 -0300
@@ -0,0 +1,425 @@
+/* DVB USB framework compliant Linux driver for the DVBWorld DVB-S 2102 Card
+*
+* Copyright (C) 2008 Igor M. Liplianin ([EMAIL PROTECTED])
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of the GNU General Public License as published by the
+* Free Software Foundation, version 2.
+*
+* see Documentation/dvb/README.dvb-usb for more information
+*/
+#include <linux/version.h>
+#include "dw2102.h"
+#include "stv0299.h"
+#include "z0194a.h"
+
+#ifndef USB_PID_DW2102
+#define USB_PID_DW2102 0x2102
+#endif
+
+#define DW2102_READ_MSG 0
+#define DW2102_WRITE_MSG 1
+
+#define REG_1F_SYMBOLRATE_BYTE0 0x1f
+#define REG_20_SYMBOLRATE_BYTE1 0x20
+#define REG_21_SYMBOLRATE_BYTE2 0x21
+
+#define DW2102_VOLTAGE_CTRL (0x1800)
+#define DW2102_RC_QUERY (0x1a00)
+
+struct dw2102_state {
+ u32 last_key_pressed;
+};
+struct dw2102_rc_keys {
+ u32 keycode;
+ u32 event;
+};
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+static int dw2102_op_rw(struct usb_device *dev, u8 request, u16 value,
+ u8 *data, u16 len, int flags)
+{
+ int ret;
+ u8 u8buf[len];
+
+ unsigned int pipe = (flags == DW2102_READ_MSG) ?
+ usb_rcvctrlpipe(dev, 0) : usb_sndctrlpipe(dev, 0);
+ u8 request_type = (flags == DW2102_READ_MSG) ? USB_DIR_IN : USB_DIR_OUT;
+
+ if (flags == DW2102_WRITE_MSG)
+ memcpy(u8buf, data, len);
+ ret = usb_control_msg(dev, pipe, request,
+ request_type | USB_TYPE_VENDOR, value, 0 , u8buf, len, 2000);
+
+ if (flags == DW2102_READ_MSG)
+ memcpy(data, u8buf, len);
+ return ret;
+}
+
+/* I2C */
+
+static int dw2102_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],
+ int num)
+{
+struct dvb_usb_device *d = i2c_get_adapdata(adap);
+ int i = 0, ret = 0;
+ u8 buf6[] = {0x2c, 0x05, 0xc0, 0, 0, 0, 0};
+ u8 request;
+ u16 value;
+
+ if (!d)
+ return -ENODEV;
+ if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+ return -EAGAIN;
+
+ switch (num) {
+ case 2:
+ /* read stv0299 register */
+ request = 0xb5;
+ value = msg[0].buf[0];/* register */
+ for (i = 0; i < msg[1].len; i++) {
+ value = value + i;
+ ret = dw2102_op_rw(d->udev, 0xb5,
+ value, buf6, 2, DW2102_READ_MSG);
+ msg[1].buf[i] = buf6[0];
+
+ }
+ break;
+ case 1:
+ switch (msg[0].addr) {
+ case 0x68:
+ /* write to stv0299 register */
+ buf6[0] = 0x2a;
+ buf6[1] = msg[0].buf[0];
+ buf6[2] = msg[0].buf[1];
+ ret = dw2102_op_rw(d->udev, 0xb2,
+ 0, buf6, 3, DW2102_WRITE_MSG);
+ break;
+ case 0x60:
+ if (msg[0].flags == 0) {
+ /* write to tuner pll */
+ buf6[0] = 0x2c;
+ buf6[1] = 5;
+ buf6[2] = 0xc0;
+ buf6[3] = msg[0].buf[0];
+ buf6[4] = msg[0].buf[1];
+ buf6[5] = msg[0].buf[2];
+ buf6[6] = msg[0].buf[3];
+ ret = dw2102_op_rw(d->udev, 0xb2,
+ 0, buf6, 7, DW2102_WRITE_MSG);
+ } else {
+ /* write to tuner pll */
+ ret = dw2102_op_rw(d->udev, 0xb5,
+ 0, buf6, 1, DW2102_READ_MSG);
+ msg[0].buf[0] = buf6[0];
+ }
+ break;
+ case (DW2102_RC_QUERY):
+ ret = dw2102_op_rw(d->udev, 0xb8,
+ 0, buf6, 2, DW2102_READ_MSG);
+ msg[0].buf[0] = buf6[0];
+ msg[0].buf[1] = buf6[1];
+ break;
+ case (DW2102_VOLTAGE_CTRL):
+ buf6[0] = 0x30;
+ buf6[1] = msg[0].buf[0];
+ ret = dw2102_op_rw(d->udev, 0xb2,
+ 0, buf6, 2, DW2102_WRITE_MSG);
+ break;
+ }
+
+ break;
+ }
+
+ mutex_unlock(&d->i2c_mutex);
+ return num;
+}
+
+static u32 dw2102_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm dw2102_i2c_algo = {
+ .master_xfer = dw2102_i2c_transfer,
+ .functionality = dw2102_i2c_func,
+};
+
+static int dw2102_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t
voltage)
+{
+ static u8 command_13v[1] = {0x00};
+ static u8 command_18v[1] = {0x01};
+ struct i2c_msg msg[] = {
+ {.addr = DW2102_VOLTAGE_CTRL, .flags = 0,
+ .buf = command_13v, .len = 1},
+ };
+
+ struct dvb_usb_adapter *udev_adap =
+ (struct dvb_usb_adapter *)(fe->dvb->priv);
+ if (voltage == SEC_VOLTAGE_18)
+ msg[0].buf = command_18v;
+ i2c_transfer(&udev_adap->dev->i2c_adap, msg, 1);
+ return 0;
+}
+
+static int dw2102_frontend_attach(struct dvb_usb_adapter *d)
+{
+ d->fe = dvb_attach(stv0299_attach, &sharp_z0194a_config,
+ &d->dev->i2c_adap);
+ if (d->fe != NULL) {
+ d->fe->ops.set_voltage = dw2102_set_voltage;
+ info("Attached stv0299!\n");
+ return 0;
+ }
+ return -EIO;
+}
+
+static int dw2102_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ dvb_attach(dvb_pll_attach, adap->fe, 0x60,
+ &adap->dev->i2c_adap, DVB_PLL_OPERA1);
+ return 0;
+}
+
+static struct dvb_usb_rc_key dw2102_rc_keys[] = {
+ { 0xf8, 0x0a, KEY_Q }, /*power*/
+ { 0xf8, 0x0c, KEY_M }, /*mute*/
+ { 0xf8, 0x11, KEY_1 },
+ { 0xf8, 0x12, KEY_2 },
+ { 0xf8, 0x13, KEY_3 },
+ { 0xf8, 0x14, KEY_4 },
+ { 0xf8, 0x15, KEY_5 },
+ { 0xf8, 0x16, KEY_6 },
+ { 0xf8, 0x17, KEY_7 },
+ { 0xf8, 0x18, KEY_8 },
+ { 0xf8, 0x19, KEY_9 },
+ { 0xf8, 0x10, KEY_0 },
+ { 0xf8, 0x1c, KEY_PAGEUP }, /*ch+*/
+ { 0xf8, 0x0f, KEY_PAGEDOWN }, /*ch-*/
+ { 0xf8, 0x1a, KEY_O }, /*vol+*/
+ { 0xf8, 0x0e, KEY_Z }, /*vol-*/
+ { 0xf8, 0x04, KEY_R }, /*rec*/
+ { 0xf8, 0x09, KEY_D }, /*fav*/
+ { 0xf8, 0x08, KEY_BACKSPACE }, /*rewind*/
+ { 0xf8, 0x07, KEY_A }, /*fast*/
+ { 0xf8, 0x0b, KEY_P }, /*pause*/
+ { 0xf8, 0x02, KEY_ESC }, /*cancel*/
+ { 0xf8, 0x03, KEY_G }, /*tab*/
+ { 0xf8, 0x00, KEY_UP }, /*up*/
+ { 0xf8, 0x1f, KEY_ENTER }, /*ok*/
+ { 0xf8, 0x01, KEY_DOWN }, /*down*/
+ { 0xf8, 0x05, KEY_C }, /*cap*/
+ { 0xf8, 0x06, KEY_S }, /*stop*/
+ { 0xf8, 0x40, KEY_F }, /*full*/
+ { 0xf8, 0x1e, KEY_W }, /*tvmode*/
+ { 0xf8, 0x1b, KEY_B }, /*recall*/
+
+};
+
+
+
+static int dw2102_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
+{
+ struct dw2102_state *st = d->priv;
+ u8 key[2];
+ struct i2c_msg msg[] = {
+ {.addr = DW2102_RC_QUERY, .flags = I2C_M_RD, .buf = key,
+ .len = 2},
+ };
+ int i;
+
+ *state = REMOTE_NO_KEY_PRESSED;
+ if (dw2102_i2c_transfer(&d->i2c_adap, msg, 1) == 1) {
+ for (i = 0; i < ARRAY_SIZE(dw2102_rc_keys); i++) {
+ if (dw2102_rc_keys[i].data == msg[0].buf[0]) {
+ *state = REMOTE_KEY_PRESSED;
+ *event = dw2102_rc_keys[i].event;
+ st->last_key_pressed =
+ dw2102_rc_keys[i].event;
+ break;
+ }
+ st->last_key_pressed = 0;
+ }
+ }
+ /* info("key: %x %x\n",key[0],key[1]); */
+ return 0;
+}
+
+static struct usb_device_id dw2102_table[] = {
+ {USB_DEVICE(USB_VID_CYPRESS, USB_PID_DW2102)},
+ {USB_DEVICE(USB_VID_CYPRESS, 0x2101)},
+ { }
+};
+
+MODULE_DEVICE_TABLE(usb, dw2102_table);
+
+static int dw2102_load_firmware(struct usb_device *dev,
+ const struct firmware *frmwr)
+{
+ u8 *b, *p;
+ int ret = 0, i;
+ u8 reset;
+ u8 reset16 [] = {0, 0, 0, 0, 0, 0, 0};
+ const struct firmware *fw;
+ const char *filename = "dvb-usb-dw2101.fw";
+ switch (dev->descriptor.idProduct) {
+ case 0x2101:
+ ret = request_firmware(&fw, filename, &dev->dev);
+ if (ret != 0) {
+ err("did not find the firmware file. (%s) "
+ "Please see linux/Documentation/dvb/ for more details "
+ "on firmware-problems.", filename);
+ return ret;
+ }
+ break;
+ case USB_PID_DW2102:
+ fw = frmwr;
+ break;
+ }
+ info("start downloading DW2102 firmware");
+ p = kmalloc(fw->size, GFP_KERNEL);
+ reset = 1;
+ /*stop the CPU*/
+ dw2102_op_rw(dev, 0xa0, 0x7f92, &reset, 1, DW2102_WRITE_MSG);
+ dw2102_op_rw(dev, 0xa0, 0xe600, &reset, 1, DW2102_WRITE_MSG);
+
+ if (p != NULL) {
+ memcpy(p, fw->data, fw->size);
+ for (i = 0; i < fw->size; i += 0x40) {
+ b = (u8 *) p + i;
+ if (dw2102_op_rw
+ (dev, 0xa0, i, b , 0x40,
+ DW2102_WRITE_MSG) != 0x40
+ ) {
+ err("error while transferring firmware");
+ ret = -EINVAL;
+ break;
+ }
+ }
+ /* restart the CPU */
+ reset = 0;
+ if (ret || dw2102_op_rw
+ (dev, 0xa0, 0x7f92, &reset, 1,
+ DW2102_WRITE_MSG) != 1) {
+ err("could not restart the USB controller CPU.");
+ ret = -EINVAL;
+ }
+ if (ret || dw2102_op_rw
+ (dev, 0xa0, 0xe600, &reset, 1,
+ DW2102_WRITE_MSG) != 1) {
+ err("could not restart the USB controller CPU.");
+ ret = -EINVAL;
+ }
+ /* init registers */
+ switch (dev->descriptor.idProduct) {
+ case USB_PID_DW2102:
+ dw2102_op_rw
+ (dev, 0xbf, 0x0040, &reset, 0,
+ DW2102_WRITE_MSG);
+ dw2102_op_rw
+ (dev, 0xb9, 0x0000, &reset16[0], 2,
+ DW2102_READ_MSG);
+ break;
+ case 0x2101:
+ dw2102_op_rw
+ (dev, 0xbc, 0x0030, &reset16[0], 2,
+ DW2102_READ_MSG);
+ dw2102_op_rw
+ (dev, 0xba, 0x0000, &reset16[0], 7,
+ DW2102_READ_MSG);
+ dw2102_op_rw
+ (dev, 0xba, 0x0000, &reset16[0], 7,
+ DW2102_READ_MSG);
+ dw2102_op_rw
+ (dev, 0xb9, 0x0000, &reset16[0], 2,
+ DW2102_READ_MSG);
+ break;
+ }
+ kfree(p);
+ }
+ return ret;
+}
+
+static struct dvb_usb_device_properties dw2102_properties = {
+ .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+ .usb_ctrl = DEVICE_SPECIFIC,
+ .firmware = "dvb-usb-dw2102.fw",
+ .size_of_priv = sizeof(struct dw2102_state),
+ .no_reconnect = 1,
+
+ .i2c_algo = &dw2102_i2c_algo,
+ .rc_key_map = dw2102_rc_keys,
+ .rc_key_map_size = ARRAY_SIZE(dw2102_rc_keys),
+ .rc_interval = 150,
+ .rc_query = dw2102_rc_query,
+
+ .generic_bulk_ctrl_endpoint = 0x81,
+ /* parameter for the MPEG2-data transfer */
+ .num_adapters = 1,
+ .download_firmware = dw2102_load_firmware,
+ .adapter = {
+ {
+ .frontend_attach = dw2102_frontend_attach,
+ .streaming_ctrl = NULL,
+ .tuner_attach = dw2102_tuner_attach,
+ .stream = {
+ .type = USB_BULK,
+ .count = 8,
+ .endpoint = 0x82,
+ .u = {
+ .bulk = {
+ .buffersize = 4096,
+ }
+ }
+ },
+ }
+ },
+ .num_device_descs = 2,
+ .devices = {
+ {"DVBWorld DVB-S 2102 USB2.0",
+ {&dw2102_table[0], NULL},
+ {NULL},
+ },
+ {"DVBWorld DVB-S 2101 USB2.0",
+ {&dw2102_table[1], NULL},
+ {NULL},
+ },
+ }
+};
+
+static int dw2102_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ return dvb_usb_device_init(intf, &dw2102_properties,
+ THIS_MODULE, NULL, adapter_nr);
+}
+
+static struct usb_driver dw2102_driver = {
+ .name = "dw2102",
+ .probe = dw2102_probe,
+ .disconnect = dvb_usb_device_exit,
+ .id_table = dw2102_table,
+};
+
+static int __init dw2102_module_init(void)
+{
+ int ret = usb_register(&dw2102_driver);
+ if (ret)
+ err("usb_register failed. Error number %d", ret);
+
+ return ret;
+}
+
+static void __exit dw2102_module_exit(void)
+{
+ usb_deregister(&dw2102_driver);
+}
+
+module_init(dw2102_module_init);
+module_exit(dw2102_module_exit);
+
+MODULE_AUTHOR("Igor M. Liplianin (c) [EMAIL PROTECTED]");
+MODULE_DESCRIPTION("Driver for DVBWorld DVB-S 2101 2102 USB2.0 device");
+MODULE_VERSION("0.1");
+MODULE_LICENSE("GPL");
diff -r a609b798c204 -r 2a87f885fc36 linux/drivers/media/dvb/dvb-usb/dw2102.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/linux/drivers/media/dvb/dvb-usb/dw2102.h Sun Jul 20 08:05:50 2008 -0300
@@ -0,0 +1,9 @@
+#ifndef _DW2102_H_
+#define _DW2102_H_
+
+#define DVB_USB_LOG_PREFIX "dw2102"
+#include <dvb-usb.h>
+
+extern int dvb_usb_dw2102_debug;
+#define deb_xfer(args...) dprintk(dvb_usb_dw2102_debug, 0x02, args)
+#endif
diff -r a609b798c204 -r 2a87f885fc36 linux/drivers/media/dvb/frontends/z0194a.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/linux/drivers/media/dvb/frontends/z0194a.h Sun Jul 20 08:05:50
2008 -0300
@@ -0,0 +1,97 @@
+/* z0194a.h Sharp z0194a tuner support
+*
+* Copyright (C) 2008 Igor M. Liplianin ([EMAIL PROTECTED])
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of the GNU General Public License as published by the
+* Free Software Foundation, version 2.
+*
+* see Documentation/dvb/README.dvb-usb for more information
+*/
+
+#ifndef Z0194A
+#define Z0194A
+
+static int sharp_z0194a__set_symbol_rate(struct dvb_frontend *fe,
+ u32 srate, u32 ratio)
+{
+ u8 aclk = 0;
+ u8 bclk = 0;
+
+ if (srate < 1500000) {
+ aclk = 0xb7; bclk = 0x47; }
+ else if (srate < 3000000) {
+ aclk = 0xb7; bclk = 0x4b; }
+ else if (srate < 7000000) {
+ aclk = 0xb7; bclk = 0x4f; }
+ else if (srate < 14000000) {
+ aclk = 0xb7; bclk = 0x53; }
+ else if (srate < 30000000) {
+ aclk = 0xb6; bclk = 0x53; }
+ else if (srate < 45000000) {
+ aclk = 0xb4; bclk = 0x51; }
+
+ stv0299_writereg(fe, 0x13, aclk);
+ stv0299_writereg(fe, 0x14, bclk);
+ stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
+ stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
+ stv0299_writereg(fe, 0x21, (ratio) & 0xf0);
+
+ return 0;
+}
+
+static u8 sharp_z0194a__inittab[] = {
+ 0x01, 0x15,
+ 0x02, 0x00,
+ 0x03, 0x00,
+ 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
+ 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */
+ 0x06, 0x40, /* DAC not used, set to high impendance mode */
+ 0x07, 0x00, /* DAC LSB */
+ 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */
+ 0x09, 0x00, /* FIFO */
+ 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
+ 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */
+ 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */
+ 0x10, 0x3f, /* AGC2 0x3d */
+ 0x11, 0x84,
+ 0x12, 0xb9,
+ 0x15, 0xc9, /* lock detector threshold */
+ 0x16, 0x00,
+ 0x17, 0x00,
+ 0x18, 0x00,
+ 0x19, 0x00,
+ 0x1a, 0x00,
+ 0x1f, 0x50,
+ 0x20, 0x00,
+ 0x21, 0x00,
+ 0x22, 0x00,
+ 0x23, 0x00,
+ 0x28, 0x00, /* out imp: normal out type: parallel FEC mode:0 */
+ 0x29, 0x1e, /* 1/2 threshold */
+ 0x2a, 0x14, /* 2/3 threshold */
+ 0x2b, 0x0f, /* 3/4 threshold */
+ 0x2c, 0x09, /* 5/6 threshold */
+ 0x2d, 0x05, /* 7/8 threshold */
+ 0x2e, 0x01,
+ 0x31, 0x1f, /* test all FECs */
+ 0x32, 0x19, /* viterbi and synchro search */
+ 0x33, 0xfc, /* rs control */
+ 0x34, 0x93, /* error control */
+ 0x0f, 0x52,
+ 0xff, 0xff
+};
+
+static struct stv0299_config sharp_z0194a_config = {
+ .demod_address = 0x68,
+ .inittab = sharp_z0194a__inittab,
+ .mclk = 88000000UL,
+ .invert = 1,
+ .skip_reinit = 0,
+ .lock_output = STV0229_LOCKOUTPUT_1,
+ .volt13_op0_op1 = STV0299_VOLT13_OP1,
+ .min_delay_ms = 100,
+ .set_symbol_rate = sharp_z0194a__set_symbol_rate,
+};
+
+#endif
---
Patch is available at:
http://linuxtv.org/hg/v4l-dvb/rev/2a87f885fc36d92cc54d2224c4b7645342ee188e
_______________________________________________
linuxtv-commits mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linuxtv-commits
