The patch number 8833 was added via Jean-Francois Moine <[EMAIL PROTECTED]>
to http://linuxtv.org/hg/v4l-dvb master development tree.

Kernel patches in this development tree may be modified to be backward
compatible with older kernels. Compatibility modifications will be
removed before inclusion into the mainstream Kernel

If anyone has any objections, please let us know by sending a message to:
        [EMAIL PROTECTED]

------

From: Hans de Goede  <[EMAIL PROTECTED]>
gspca: Cleanup the sonixb code.


-the usb-id table caried several flags which were not usb-id specific but
 sensor specific, add a sensor_data array and move these flag there
-fr_h_sz was being abused to store and check which bridge was being used
 instead add a bridge member to the sd struct
-now that we have a sensor_data table use that to store pointers to
 init_sequences instead of using switch cases on sd->sensor

Priority: high

Signed-off-by: Hans de Goede <[EMAIL PROTECTED]>
Signed-off-by: Jean-Francois Moine <[EMAIL PROTECTED]>


---

 linux/drivers/media/video/gspca/sonixb.c |  377 ++++++++++-------------
 1 file changed, 168 insertions(+), 209 deletions(-)

diff -r fca2db440606 -r 883c398f79f8 linux/drivers/media/video/gspca/sonixb.c
--- a/linux/drivers/media/video/gspca/sonixb.c  Thu Aug 28 18:22:19 2008 +0200
+++ b/linux/drivers/media/video/gspca/sonixb.c  Fri Aug 29 09:35:27 2008 +0200
@@ -41,8 +41,12 @@ struct sd {
        unsigned char frames_to_drop;
        unsigned char freq;             /* light freq filter setting */
 
-       unsigned char fr_h_sz;          /* size of frame header */
-       char sensor;                    /* Type of image sensor chip */
+       __u8 bridge;                    /* Type of bridge */
+#define BRIDGE_101 0
+#define BRIDGE_102 0 /* We make no difference between 101 and 102 */
+#define BRIDGE_103 1
+
+       __u8 sensor;                    /* Type of image sensor chip */
 #define SENSOR_HV7131R 0
 #define SENSOR_OV6650 1
 #define SENSOR_OV7630 2
@@ -50,15 +54,31 @@ struct sd {
 #define SENSOR_PAS202 4
 #define SENSOR_TAS5110 5
 #define SENSOR_TAS5130CXX 6
-       char sensor_has_gain;
+       __u8 reg11;
+};
+
+typedef const __u8 sensor_init_t[8];
+
+struct sensor_data {
+       const __u8 *bridge_init[2];
+       int bridge_init_size[2];
+       sensor_init_t *sensor_init;
+       int sensor_init_size;
+       sensor_init_t *sensor_bridge_init[2];
+       int sensor_bridge_init_size[2];
+       int flags;
+       unsigned ctrl_dis;
        __u8 sensor_addr;
-       __u8 reg11;
-};
-
-/* flags used in the device id table */
+};
+
+/* sensor_data flags */
 #define F_GAIN 0x01            /* has gain */
 #define F_SIF  0x02            /* sif or vga */
-#define F_H18  0x04            /* long (18 b) or short (12 b) frame header */
+
+/* ctrl_dis helper macros */
+#define NO_EXPO ((1 << EXPOSURE_IDX) | (1 << AUTOGAIN_IDX))
+#define NO_FREQ (1 << FREQ_IDX)
+#define NO_BRIGHTNESS (1 << BRIGHTNESS_IDX)
 
 #define COMP2 0x8f
 #define COMP 0xc7              /* 0x87 //0x07 */
@@ -68,6 +88,18 @@ struct sd {
 #define MCK_INIT1 0x20         /*fixme: Bayer - 0x50 for JPEG ??*/
 
 #define SYS_CLK 0x04
+
+#define SENS(bridge_1, bridge_3, sensor, sensor_1, \
+       sensor_3, _flags, _ctrl_dis, _sensor_addr) \
+{ \
+       .bridge_init = { bridge_1, bridge_3 }, \
+       .bridge_init_size = { sizeof(bridge_1), sizeof(bridge_3) }, \
+       .sensor_init = sensor, \
+       .sensor_init_size = sizeof(sensor), \
+       .sensor_bridge_init = { sensor_1, sensor_3,}, \
+       .sensor_bridge_init_size = { sizeof(sensor_1), sizeof(sensor_3)}, \
+       .flags = _flags, .ctrl_dis = _ctrl_dis, .sensor_addr = _sensor_addr \
+}
 
 /* We calculate the autogain at the end of the transfer of a frame, at this
    moment a frame with the old settings is being transmitted, and a frame is
@@ -220,7 +252,7 @@ static const __u8 initOv6650[] = {
 #if 1
        0x44, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80,
        0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-       0x00, 0x02, 0x01, 0x0a, 0x16, 0x12, 0x68, 0x0b,
+       0x00, 0x02, 0x01, 0x0a, 0x16, 0x12, 0x68, 0x8b,
        0x10, 0x1d, 0x10, 0x00, 0x06, 0x1f, 0x00
 #else
 /* old version? */
@@ -287,7 +319,7 @@ static const __u8 initOv7630[] = {
 #if 1
        0x00, 0x02, 0x01, 0x0a,                         /* r11 .. r14 */
        0x28, 0x1e,                     /* H & V sizes     r15 .. r16 */
-       0x68, COMP1, MCK_INIT1,                         /* r17 .. r19 */
+       0x68, COMP2, MCK_INIT1,                         /* r17 .. r19 */
        0x1d, 0x10, 0x02, 0x03, 0x0f, 0x0c              /* r1a .. r1f */
 #else /* jfm from win */
        0x00, 0x01, 0x01, 0x0a,                         /* r11 .. r14 */
@@ -328,47 +360,65 @@ static const __u8 ov7630_sensor_init[][8
        {0xd0, 0x21, 0x17, 0x1c, 0xbd, 0x06, 0xf6, 0x10},
 };
 
+static const __u8 ov7630_sensor_init_3[][8] = {
+       {0xa0, 0x21, 0x13, 0x80, 0x00,  0x00, 0x00, 0x10},
+};
+
 static const __u8 initPas106[] = {
        0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x81, 0x40, 0x00, 0x00, 0x00,
        0x00, 0x00,
        0x00, 0x00, 0x00, 0x05, 0x01, 0x00,
-       0x16, 0x12, 0x28, COMP1, MCK_INIT1,
+       0x16, 0x12, 0x24, COMP1, MCK_INIT1,
        0x18, 0x10, 0x04, 0x03, 0x11, 0x0c
 };
 /* compression 0x86 mckinit1 0x2b */
-static const __u8 pas106_data[][2] = {
-       {0x02, 0x04},           /* Pixel Clock Divider 6 */
-       {0x03, 0x13},           /* Frame Time MSB */
-/*     {0x03, 0x12},            * Frame Time MSB */
-       {0x04, 0x06},           /* Frame Time LSB */
-/*     {0x04, 0x05},            * Frame Time LSB */
-       {0x05, 0x65},           /* Shutter Time Line Offset */
-/*     {0x05, 0x6d},            * Shutter Time Line Offset */
-/*     {0x06, 0xb1},            * Shutter Time Pixel Offset */
-       {0x06, 0xcd},           /* Shutter Time Pixel Offset */
-       {0x07, 0xc1},           /* Black Level Subtract Sign */
-/*     {0x07, 0x00},            * Black Level Subtract Sign */
-       {0x08, 0x06},           /* Black Level Subtract Level */
-       {0x08, 0x06},           /* Black Level Subtract Level */
-/*     {0x08, 0x01},            * Black Level Subtract Level */
-       {0x09, 0x05},           /* Color Gain B Pixel 5 a */
-       {0x0a, 0x04},           /* Color Gain G1 Pixel 1 5 */
-       {0x0b, 0x04},           /* Color Gain G2 Pixel 1 0 5 */
-       {0x0c, 0x05},           /* Color Gain R Pixel 3 1 */
-       {0x0d, 0x00},           /* Color GainH  Pixel */
-       {0x0e, 0x0e},           /* Global Gain */
-       {0x0f, 0x00},           /* Contrast */
-       {0x10, 0x06},           /* H&V synchro polarity */
-       {0x11, 0x06},           /* ?default */
-       {0x12, 0x06},           /* DAC scale */
-       {0x14, 0x02},           /* ?default */
-       {0x13, 0x01},           /* Validate Settings */
-};
+static const __u8 pas106_sensor_init[][8] = {
+       /* Pixel Clock Divider 6 */
+       { 0xa1, 0x40, 0x02, 0x04, 0x00, 0x00, 0x00, 0x14 },
+       /* Frame Time MSB (also seen as 0x12) */
+       { 0xa1, 0x40, 0x03, 0x13, 0x00, 0x00, 0x00, 0x14 },
+       /* Frame Time LSB (also seen as 0x05) */
+       { 0xa1, 0x40, 0x04, 0x06, 0x00, 0x00, 0x00, 0x14 },
+       /* Shutter Time Line Offset (also seen as 0x6d) */
+       { 0xa1, 0x40, 0x05, 0x65, 0x00, 0x00, 0x00, 0x14 },
+       /* Shutter Time Pixel Offset (also seen as 0xb1) */
+       { 0xa1, 0x40, 0x06, 0xcd, 0x00, 0x00, 0x00, 0x14 },
+       /* Black Level Subtract Sign (also seen 0x00) */
+       { 0xa1, 0x40, 0x07, 0xc1, 0x00, 0x00, 0x00, 0x14 },
+       /* Black Level Subtract Level (also seen 0x01) */
+       { 0xa1, 0x40, 0x08, 0x06, 0x00, 0x00, 0x00, 0x14 },
+       { 0xa1, 0x40, 0x08, 0x06, 0x00, 0x00, 0x00, 0x14 },
+       /* Color Gain B Pixel 5 a */
+       { 0xa1, 0x40, 0x09, 0x05, 0x00, 0x00, 0x00, 0x14 },
+       /* Color Gain G1 Pixel 1 5 */
+       { 0xa1, 0x40, 0x0a, 0x04, 0x00, 0x00, 0x00, 0x14 },
+       /* Color Gain G2 Pixel 1 0 5 */
+       { 0xa1, 0x40, 0x0b, 0x04, 0x00, 0x00, 0x00, 0x14 },
+       /* Color Gain R Pixel 3 1 */
+       { 0xa1, 0x40, 0x0c, 0x05, 0x00, 0x00, 0x00, 0x14 },
+       /* Color GainH  Pixel */
+       { 0xa1, 0x40, 0x0d, 0x00, 0x00, 0x00, 0x00, 0x14 },
+       /* Global Gain */
+       { 0xa1, 0x40, 0x0e, 0x0e, 0x00, 0x00, 0x00, 0x14 },
+       /* Contrast */
+       { 0xa1, 0x40, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x14 },
+       /* H&V synchro polarity */
+       { 0xa1, 0x40, 0x10, 0x06, 0x00, 0x00, 0x00, 0x14 },
+       /* ?default */
+       { 0xa1, 0x40, 0x11, 0x06, 0x00, 0x00, 0x00, 0x14 },
+       /* DAC scale */
+       { 0xa1, 0x40, 0x12, 0x06, 0x00, 0x00, 0x00, 0x14 },
+       /* ?default */
+       { 0xa1, 0x40, 0x14, 0x02, 0x00, 0x00, 0x00, 0x14 },
+       /* Validate Settings */
+       { 0xa1, 0x40, 0x13, 0x01, 0x00, 0x00, 0x00, 0x14 },
+};
+
 static const __u8 initPas202[] = {
        0x44, 0x44, 0x21, 0x30, 0x00, 0x00, 0x00, 0x80, 0x40, 0x00, 0x00, 0x00,
        0x00, 0x00,
        0x00, 0x00, 0x00, 0x07, 0x03, 0x0a,     /* 6 */
-       0x28, 0x1e, 0x28, 0x89, 0x30,
+       0x28, 0x1e, 0x28, 0x89, 0x20,
        0x00, 0x00, 0x02, 0x03, 0x0f, 0x0c
 };
 static const __u8 pas202_sensor_init[][8] = {
@@ -423,6 +473,21 @@ static const __u8 tas5130_sensor_init[][
        {0x30, 0x11, 0x02, 0x20, 0x70, 0x00, 0x00, 0x10},
 };
 
+struct sensor_data sensor_data[] = {
+SENS(initHv7131, NULL, hv7131_sensor_init, NULL, NULL, 0, NO_EXPO|NO_FREQ, 0),
+SENS(initOv6650, NULL, ov6650_sensor_init, NULL, NULL, F_GAIN|F_SIF, 0, 0x60),
+SENS(initOv7630, initOv7630_3, ov7630_sensor_init, NULL, ov7630_sensor_init_3,
+       F_GAIN, 0, 0x21),
+SENS(initPas106, NULL, pas106_sensor_init, NULL, NULL, F_SIF, NO_EXPO|NO_FREQ,
+       0),
+SENS(initPas202, initPas202, pas202_sensor_init, NULL, NULL, 0,
+       NO_EXPO|NO_FREQ, 0),
+SENS(initTas5110, NULL, tas5110_sensor_init, NULL, NULL, F_GAIN|F_SIF,
+       NO_BRIGHTNESS|NO_FREQ, 0),
+SENS(initTas5130, NULL, tas5130_sensor_init, NULL, NULL, 0, NO_EXPO|NO_FREQ,
+       0),
+};
+
 /* get one byte in gspca_dev->usb_buf */
 static void reg_r(struct gspca_dev *gspca_dev,
                  __u16 value)
@@ -501,7 +566,7 @@ static void setbrightness(struct gspca_d
                        {0xa0, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x10};
 
                /* change reg 0x06 */
-               i2cOV[1] = sd->sensor_addr;
+               i2cOV[1] = sensor_data[sd->sensor].sensor_addr;
                i2cOV[3] = sd->brightness;
                if (i2c_w(gspca_dev, i2cOV) < 0)
                        goto err;
@@ -588,7 +653,7 @@ static void setsensorgain(struct gspca_d
        case SENSOR_OV7630: {
                __u8 i2c[] = {0xa0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10};
 
-               i2c[1] = sd->sensor_addr;
+               i2c[1] = sensor_data[sd->sensor].sensor_addr;
                i2c[3] = gain >> 2;
                if (i2c_w(gspca_dev, i2c) < 0)
                        goto err;
@@ -615,7 +680,7 @@ static void setgain(struct gspca_dev *gs
        rgb_value = gain;
        reg_w(gspca_dev, 0x11, &rgb_value, 1);
 
-       if (sd->sensor_has_gain)
+       if (sensor_data[sd->sensor].flags & F_GAIN)
                setsensorgain(gspca_dev);
 }
 
@@ -695,7 +760,7 @@ static void setexposure(struct gspca_dev
                        reg10 = reg10_max;
 
                /* Write reg 10 and reg11 low nibble */
-               i2c[1] = sd->sensor_addr;
+               i2c[1] = sensor_data[sd->sensor].sensor_addr;
                i2c[3] = reg10;
                i2c[4] |= reg11 - 1;
 
@@ -735,7 +800,7 @@ static void setfreq(struct gspca_dev *gs
                                        ? 0x4f : 0x8a;
                        break;
                }
-               i2c[1] = sd->sensor_addr;
+               i2c[1] = sensor_data[sd->sensor].sensor_addr;
                if (i2c_w(gspca_dev, i2c) < 0)
                        PDEBUG(D_ERR, "i2c error setfreq");
                break;
@@ -768,28 +833,19 @@ static int sd_config(struct gspca_dev *g
 {
        struct sd *sd = (struct sd *) gspca_dev;
        struct cam *cam;
-       int sif = 0;
 
        reg_r(gspca_dev, 0x00);
        if (gspca_dev->usb_buf[0] != 0x10)
                return -ENODEV;
 
        /* copy the webcam info from the device id */
-       sd->sensor = (id->driver_info >> 24) & 0xff;
-       if (id->driver_info & (F_GAIN << 16))
-               sd->sensor_has_gain = 1;
-       if (id->driver_info & (F_SIF << 16))
-               sif = 1;
-       if (id->driver_info & (F_H18 << 16))
-               sd->fr_h_sz = 18;               /* size of frame header */
-       else
-               sd->fr_h_sz = 12;
-       gspca_dev->ctrl_dis = (id->driver_info >> 8) & 0xff;
-       sd->sensor_addr = id->driver_info & 0xff;
+       sd->sensor = id->driver_info >> 8;
+       sd->bridge = id->driver_info & 0xff;
+       gspca_dev->ctrl_dis = sensor_data[sd->sensor].ctrl_dis;
 
        cam = &gspca_dev->cam;
        cam->epaddr = 0x01;
-       if (!sif) {
+       if (!(sensor_data[sd->sensor].flags & F_SIF)) {
                cam->cam_mode = vga_mode;
                cam->nmodes = ARRAY_SIZE(vga_mode);
        } else {
@@ -818,78 +874,29 @@ static int sd_init(struct gspca_dev *gsp
        return 0;
 }
 
-static void pas106_i2cinit(struct gspca_dev *gspca_dev)
-{
-       int i;
-       const __u8 *data;
-       __u8 i2c1[] = { 0xa1, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x14 };
-
-       i = ARRAY_SIZE(pas106_data);
-       data = pas106_data[0];
-       while (--i >= 0) {
-               memcpy(&i2c1[2], data, 2);
-                                       /* copy 2 bytes from the template */
-               if (i2c_w(gspca_dev, i2c1) < 0)
-                       PDEBUG(D_ERR, "i2c error pas106");
-               data += 2;
-       }
-}
-
 /* -- start the camera -- */
 static void sd_start(struct gspca_dev *gspca_dev)
 {
        struct sd *sd = (struct sd *) gspca_dev;
-       int mode, l = 0x1f;
+       int mode, l;
        const __u8 *sn9c10x;
        __u8 reg17_19[3];
 
-       mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
+       mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 0x07;
+       sn9c10x = sensor_data[sd->sensor].bridge_init[sd->bridge];
+       l = sensor_data[sd->sensor].bridge_init_size[sd->bridge];
+       reg17_19[0] = sn9c10x[0x17 - 1];
+       reg17_19[1] = sn9c10x[0x18 - 1] | (mode << 4);
+       reg17_19[2] = sn9c10x[0x19 - 1];
+       /* Special cases where reg 17 and or 19 value depends on mode */
        switch (sd->sensor) {
-       case SENSOR_HV7131R:
-               sn9c10x = initHv7131;
-               reg17_19[0] = 0x60;
-               reg17_19[1] = (mode << 4) | 0x8a;
-               reg17_19[2] = 0x20;
+       case SENSOR_PAS202:
+               reg17_19[0] = mode ? 0x24 : 0x20;
                break;
-       case SENSOR_OV6650:
-               sn9c10x = initOv6650;
-               reg17_19[0] = 0x68;
-               reg17_19[1] = (mode << 4) | 0x8b;
-               reg17_19[2] = 0x20;
-               break;
-       case SENSOR_OV7630:
-               if (sd->fr_h_sz == 18) { /* SN9C103 */
-                       sn9c10x = initOv7630_3;
-                       l = sizeof initOv7630_3;
-               } else
-                       sn9c10x = initOv7630;
-               reg17_19[0] = 0x68;
-               reg17_19[1] = (mode << 4) | COMP2;
-               reg17_19[2] = MCK_INIT1;
-               break;
-       case SENSOR_PAS106:
-               sn9c10x = initPas106;
-               reg17_19[0] = 0x24;             /* 0x28 */
-               reg17_19[1] = (mode << 4) | COMP1;
-               reg17_19[2] = MCK_INIT1;
-               break;
-       case SENSOR_PAS202:
-               sn9c10x = initPas202;
-               reg17_19[0] = mode ? 0x24 : 0x20;
-               reg17_19[1] = (mode << 4) | 0x89;
-               reg17_19[2] = 0x20;
-               break;
-       case SENSOR_TAS5110:
-               sn9c10x = initTas5110;
-               reg17_19[0] = 0x60;
-               reg17_19[1] = (mode << 4) | 0x86;
-               reg17_19[2] = 0x2b;             /* 0xf3; */
-               break;
-       default:
-/*     case SENSOR_TAS5130CXX: */
-               sn9c10x = initTas5130;
-               reg17_19[0] = 0x60;
-               reg17_19[1] = (mode << 4) | COMP;
+       case SENSOR_TAS5130CXX:
+               /* probably not mode specific at all most likely the upper
+                  nibble of 0x19 is exposure (clock divider) just as with
+                  the tas5110, we need someone to test this. */
                reg17_19[2] = mode ? 0x23 : 0x43;
                break;
        }
@@ -900,41 +907,16 @@ static void sd_start(struct gspca_dev *g
        reg_w(gspca_dev, 0x17, &sn9c10x[0x17 - 1], 1);
        /* Set the registers from the template */
        reg_w(gspca_dev, 0x01, sn9c10x, l);
-       switch (sd->sensor) {
-       case SENSOR_HV7131R:
-               i2c_w_vector(gspca_dev, hv7131_sensor_init,
-                               sizeof hv7131_sensor_init);
-               break;
-       case SENSOR_OV6650:
-               i2c_w_vector(gspca_dev, ov6650_sensor_init,
-                               sizeof ov6650_sensor_init);
-               break;
-       case SENSOR_OV7630:
-               i2c_w_vector(gspca_dev, ov7630_sensor_init,
-                               sizeof ov7630_sensor_init);
-               if (sd->fr_h_sz == 18) { /* SN9C103 */
-                       const __u8 i2c[] = { 0xa0, 0x21, 0x13, 0x80, 0x00,
-                                               0x00, 0x00, 0x10 };
-                       i2c_w(gspca_dev, i2c);
-               }
-               break;
-       case SENSOR_PAS106:
-               pas106_i2cinit(gspca_dev);
-               break;
-       case SENSOR_PAS202:
-               i2c_w_vector(gspca_dev, pas202_sensor_init,
-                               sizeof pas202_sensor_init);
-               break;
-       case SENSOR_TAS5110:
-               i2c_w_vector(gspca_dev, tas5110_sensor_init,
-                               sizeof tas5110_sensor_init);
-               break;
-       default:
-/*     case SENSOR_TAS5130CXX: */
-               i2c_w_vector(gspca_dev, tas5130_sensor_init,
-                               sizeof tas5130_sensor_init);
-               break;
-       }
+
+       /* Init the sensor */
+       i2c_w_vector(gspca_dev, sensor_data[sd->sensor].sensor_init,
+                       sensor_data[sd->sensor].sensor_init_size);
+       if (sensor_data[sd->sensor].sensor_bridge_init[sd->bridge])
+               i2c_w_vector(gspca_dev,
+                       sensor_data[sd->sensor].sensor_bridge_init[sd->bridge],
+                       sensor_data[sd->sensor].sensor_bridge_init_size[
+                               sd->bridge]);
+
        /* H_size V_size 0x28, 0x1e -> 640x480. 0x16, 0x12 -> 352x288 */
        reg_w(gspca_dev, 0x15, &sn9c10x[0x15 - 1], 2);
        /* compression register */
@@ -970,10 +952,7 @@ static void sd_start(struct gspca_dev *g
 
 static void sd_stopN(struct gspca_dev *gspca_dev)
 {
-       __u8 ByteSend;
-
-       ByteSend = 0x09;        /* 0X00 */
-       reg_w(gspca_dev, 0x01, &ByteSend, 1);
+       sd_init(gspca_dev);
 }
 
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
@@ -1003,15 +982,17 @@ static void sd_pkt_scan(struct gspca_dev
                            && data[5 + i] == 0x96) {   /* start of frame */
                                int lum = -1;
                                int pkt_type = LAST_PACKET;
-
-                               if (len - i < sd->fr_h_sz) {
+                               int fr_h_sz = (sd->bridge == BRIDGE_103) ?
+                                       18 : 12;
+
+                               if (len - i < fr_h_sz) {
                                        PDEBUG(D_STREAM, "packet too short to"
                                                " get avg brightness");
-                               } else if (sd->fr_h_sz == 12) {
-                                       lum = data[i + 8] + (data[i + 9] << 8);
-                               } else {
+                               } else if (sd->bridge == BRIDGE_103) {
                                        lum = data[i + 9] +
                                                (data[i + 10] << 8);
+                               } else {
+                                       lum = data[i + 8] + (data[i + 9] << 8);
                                }
                                if (lum == 0) {
                                        lum = -1;
@@ -1026,8 +1007,8 @@ static void sd_pkt_scan(struct gspca_dev
 
                                frame = gspca_frame_add(gspca_dev, pkt_type,
                                                        frame, data, 0);
-                               data += i + sd->fr_h_sz;
-                               len -= i + sd->fr_h_sz;
+                               data += i + fr_h_sz;
+                               len -= i + fr_h_sz;
                                gspca_frame_add(gspca_dev, FIRST_PACKET,
                                                frame, data, len);
                                return;
@@ -1176,55 +1157,33 @@ static const struct sd_desc sd_desc = {
 };
 
 /* -- module initialisation -- */
-#define SFCI(sensor, flags, disable_ctrls, i2c_addr) \
-       .driver_info = (SENSOR_ ## sensor << 24) \
-                       | ((flags) << 16) \
-                       | ((disable_ctrls) << 8) \
-                       | (i2c_addr)
-#define NO_EXPO ((1 << EXPOSURE_IDX) | (1 << AUTOGAIN_IDX))
-#define NO_FREQ (1 << FREQ_IDX)
-#define NO_BRIGHTNESS (1 << BRIGHTNESS_IDX)
+#define SB(sensor, bridge) \
+       .driver_info = (SENSOR_ ## sensor << 8) | BRIDGE_ ## bridge
+
 
 static __devinitdata struct usb_device_id device_table[] = {
 #if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
-       {USB_DEVICE(0x0c45, 0x6001),                    /* SN9C102 */
-                       SFCI(TAS5110, F_GAIN|F_SIF, NO_BRIGHTNESS|NO_FREQ, 0)},
-       {USB_DEVICE(0x0c45, 0x6005),                    /* SN9C101 */
-                       SFCI(TAS5110, F_GAIN|F_SIF, NO_BRIGHTNESS|NO_FREQ, 0)},
-       {USB_DEVICE(0x0c45, 0x6007),                    /* SN9C101 */
-                       SFCI(TAS5110, F_GAIN|F_SIF, NO_BRIGHTNESS|NO_FREQ, 0)},
-       {USB_DEVICE(0x0c45, 0x6009),                    /* SN9C101 */
-                       SFCI(PAS106, F_SIF, NO_EXPO|NO_FREQ, 0)},
-       {USB_DEVICE(0x0c45, 0x600d),                    /* SN9C101 */
-                       SFCI(PAS106, F_SIF, NO_EXPO|NO_FREQ, 0)},
+       {USB_DEVICE(0x0c45, 0x6001), SB(TAS5110, 102)},
+       {USB_DEVICE(0x0c45, 0x6005), SB(TAS5110, 101)},
+       {USB_DEVICE(0x0c45, 0x6007), SB(TAS5110, 101)},
+       {USB_DEVICE(0x0c45, 0x6009), SB(PAS106, 101)},
+       {USB_DEVICE(0x0c45, 0x600d), SB(PAS106, 101)},
 #endif
-       {USB_DEVICE(0x0c45, 0x6011),            /* SN9C101 - SN9C101G */
-                       SFCI(OV6650, F_GAIN|F_SIF, 0, 0x60)},
+       {USB_DEVICE(0x0c45, 0x6011), SB(OV6650, 101)},
 #if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
-       {USB_DEVICE(0x0c45, 0x6019),                    /* SN9C101 */
-                       SFCI(OV7630, F_GAIN, 0, 0x21)},
-       {USB_DEVICE(0x0c45, 0x6024),                    /* SN9C102 */
-                       SFCI(TAS5130CXX, 0, NO_EXPO|NO_FREQ, 0)},
-       {USB_DEVICE(0x0c45, 0x6025),                    /* SN9C102 */
-                       SFCI(TAS5130CXX, 0, NO_EXPO|NO_FREQ, 0)},
-       {USB_DEVICE(0x0c45, 0x6028),                    /* SN9C102 */
-                       SFCI(PAS202, 0, NO_EXPO|NO_FREQ, 0)},
-       {USB_DEVICE(0x0c45, 0x6029),                    /* SN9C101 */
-                       SFCI(PAS106, F_SIF, NO_EXPO|NO_FREQ, 0)},
-       {USB_DEVICE(0x0c45, 0x602c),                    /* SN9C102 */
-                       SFCI(OV7630, F_GAIN, 0, 0x21)},
+       {USB_DEVICE(0x0c45, 0x6019), SB(OV7630, 101)},
+       {USB_DEVICE(0x0c45, 0x6024), SB(TAS5130CXX, 102)},
+       {USB_DEVICE(0x0c45, 0x6025), SB(TAS5130CXX, 102)},
+       {USB_DEVICE(0x0c45, 0x6028), SB(PAS202, 102)},
+       {USB_DEVICE(0x0c45, 0x6029), SB(PAS106, 102)},
+       {USB_DEVICE(0x0c45, 0x602c), SB(OV7630, 102)},
 #endif
-       {USB_DEVICE(0x0c45, 0x602d),                    /* SN9C102 */
-                       SFCI(HV7131R, 0, NO_EXPO|NO_FREQ, 0)},
+       {USB_DEVICE(0x0c45, 0x602d), SB(HV7131R, 102)},
 #if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
-       {USB_DEVICE(0x0c45, 0x602e),                    /* SN9C102 */
-                       SFCI(OV7630, F_GAIN, 0, 0x21)},
-       {USB_DEVICE(0x0c45, 0x608f),                    /* SN9C103 */
-                       SFCI(OV7630, F_GAIN|F_H18, 0, 0x21)},
-       {USB_DEVICE(0x0c45, 0x60af),                    /* SN9C103 */
-                       SFCI(PAS202, F_H18, NO_EXPO|NO_FREQ, 0)},
-       {USB_DEVICE(0x0c45, 0x60b0),                    /* SN9C103 */
-                       SFCI(OV7630, F_GAIN|F_H18, 0, 0x21)},
+       {USB_DEVICE(0x0c45, 0x602e), SB(OV7630, 102)},
+       {USB_DEVICE(0x0c45, 0x608f), SB(OV7630, 103)},
+       {USB_DEVICE(0x0c45, 0x60af), SB(PAS202, 103)},
+       {USB_DEVICE(0x0c45, 0x60b0), SB(OV7630, 103)},
 #endif
        {}
 };


---

Patch is available at: 
http://linuxtv.org/hg/v4l-dvb/rev/883c398f79f8fdfb23e7981cffff44ad483ac7ff

_______________________________________________
linuxtv-commits mailing list
linuxtv-commits@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linuxtv-commits

Reply via email to