The patch number 9640 was added via Mauro Carvalho Chehab <[EMAIL PROTECTED]>
to http://linuxtv.org/hg/v4l-dvb master development tree.
Kernel patches in this development tree may be modified to be backward
compatible with older kernels. Compatibility modifications will be
removed before inclusion into the mainstream Kernel
If anyone has any objections, please let us know by sending a message to:
[EMAIL PROTECTED]
------
From: Mauro Carvalho Chehab <[EMAIL PROTECTED]>
merge: http://linuxtv.org/hg/~pb/v4l-dvb/
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <[EMAIL PROTECTED]>
---
linux/drivers/media/dvb/dvb-usb/dib0700.h | 5
linux/drivers/media/dvb/dvb-usb/dib0700_core.c | 16 +
linux/drivers/media/dvb/dvb-usb/dib0700_devices.c | 141 +++++++++++++-
3 files changed, 159 insertions(+), 3 deletions(-)
diff -r 79a53ef65e50 -r 9d142344f9d1 linux/drivers/media/dvb/dvb-usb/dib0700.h
--- a/linux/drivers/media/dvb/dvb-usb/dib0700.h Thu Nov 13 02:18:21 2008 +0000
+++ b/linux/drivers/media/dvb/dvb-usb/dib0700.h Sun Nov 16 20:35:53 2008 -0200
@@ -22,7 +22,7 @@ extern int dvb_usb_dib0700_debug;
#define REQUEST_I2C_READ 0x2
#define REQUEST_I2C_WRITE 0x3
-#define REQUEST_POLL_RC 0x4
+#define REQUEST_POLL_RC 0x4 /* deprecated in firmware v1.20 */
#define REQUEST_JUMPRAM 0x8
#define REQUEST_SET_CLOCK 0xB
#define REQUEST_SET_GPIO 0xC
@@ -40,11 +40,14 @@ struct dib0700_state {
u16 mt2060_if1[2];
u8 rc_toggle;
u8 rc_counter;
+ u8 rc_func_version;
u8 is_dib7000pc;
u8 fw_use_new_i2c_api;
u8 disable_streaming_master_mode;
};
+extern int dib0700_get_version(struct dvb_usb_device *d, u32 *hwversion,
+ u32 *romversion, u32 *ramversion, u32 *fwtype);
extern int dib0700_set_gpio(struct dvb_usb_device *, enum dib07x0_gpios gpio,
u8 gpio_dir, u8 gpio_val);
extern int dib0700_ctrl_clock(struct dvb_usb_device *d, u32 clk_MHz, u8
clock_out_gp3);
extern int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx,
u8 rxlen);
diff -r 79a53ef65e50 -r 9d142344f9d1
linux/drivers/media/dvb/dvb-usb/dib0700_core.c
--- a/linux/drivers/media/dvb/dvb-usb/dib0700_core.c Thu Nov 13 02:18:21
2008 +0000
+++ b/linux/drivers/media/dvb/dvb-usb/dib0700_core.c Sun Nov 16 20:35:53
2008 -0200
@@ -18,6 +18,22 @@ MODULE_PARM_DESC(dvb_usb_dib0700_ir_prot
MODULE_PARM_DESC(dvb_usb_dib0700_ir_proto, "set ir protocol (0=NEC, 1=RC5
(default), 2=RC6).");
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+
+int dib0700_get_version(struct dvb_usb_device *d, u32 *hwversion,
+ u32 *romversion, u32 *ramversion, u32 *fwtype)
+{
+ u8 b[16];
+ int ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0),
+ REQUEST_GET_VERSION,
+ USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
+ b, sizeof(b), USB_CTRL_GET_TIMEOUT);
+ *hwversion = (b[0] << 24) | (b[1] << 16) | (b[2] << 8) | b[3];
+ *romversion = (b[4] << 24) | (b[5] << 16) | (b[6] << 8) | b[7];
+ *ramversion = (b[8] << 24) | (b[9] << 16) | (b[10] << 8) | b[11];
+ *fwtype = (b[12] << 24) | (b[13] << 16) | (b[14] << 8) | b[15];
+ return ret;
+}
/* expecting rx buffer: request data[0] data[1] ... data[2] */
static int dib0700_ctrl_wr(struct dvb_usb_device *d, u8 *tx, u8 txlen)
diff -r 79a53ef65e50 -r 9d142344f9d1
linux/drivers/media/dvb/dvb-usb/dib0700_devices.c
--- a/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c Thu Nov 13 02:18:21
2008 +0000
+++ b/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c Sun Nov 16 20:35:53
2008 -0200
@@ -37,6 +37,7 @@ static struct mt2060_config bristol_mt20
.i2c_address = 0x61,
}
};
+
static struct dibx000_agc_config bristol_dib3000p_mt2060_agc_config = {
.band_caps = BAND_VHF | BAND_UHF,
@@ -451,8 +452,13 @@ static u8 rc_request[] = { REQUEST_POLL_
/* Number of keypresses to ignore before start repeating */
#define RC_REPEAT_DELAY 2
-
-static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
+#define RC_REPEAT_DELAY_V1_20 5
+
+
+
+/* Used by firmware versions < 1.20 (deprecated) */
+static int dib0700_rc_query_legacy(struct dvb_usb_device *d, u32 *event,
+ int *state)
{
u8 key[4];
int i;
@@ -527,6 +533,137 @@ static int dib0700_rc_query(struct dvb_u
err("Unknown remote controller key: %2X %2X %2X %2X", (int) key[3-2],
(int) key[3-3], (int) key[3-1], (int) key[3]);
d->last_event = 0;
return 0;
+}
+
+/* This is the structure of the RC response packet starting in firmware 1.20 */
+struct dib0700_rc_response {
+ u8 report_id;
+ u8 data_state;
+ u8 system_msb;
+ u8 system_lsb;
+ u8 data;
+ u8 not_data;
+};
+
+/* This supports the new IR response format for firmware v1.20 */
+static int dib0700_rc_query_v1_20(struct dvb_usb_device *d, u32 *event,
+ int *state)
+{
+ struct dvb_usb_rc_key *keymap = d->props.rc_key_map;
+ struct dib0700_state *st = d->priv;
+ struct dib0700_rc_response poll_reply;
+ u8 buf[6];
+ int i;
+ int status;
+ int actlen;
+ int found = 0;
+
+ /* Set initial results in case we exit the function early */
+ *event = 0;
+ *state = REMOTE_NO_KEY_PRESSED;
+
+ /* Firmware v1.20 provides RC data via bulk endpoint 1 */
+ status = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev, 1), buf,
+ sizeof(buf), &actlen, 50);
+ if (status < 0) {
+ /* No data available (meaning no key press) */
+ return 0;
+ }
+
+ if (actlen != sizeof(buf)) {
+ /* We didn't get back the 6 byte message we expected */
+ err("Unexpected RC response size [%d]", actlen);
+ return -1;
+ }
+
+ poll_reply.report_id = buf[0];
+ poll_reply.data_state = buf[1];
+ poll_reply.system_msb = buf[2];
+ poll_reply.system_lsb = buf[3];
+ poll_reply.data = buf[4];
+ poll_reply.not_data = buf[5];
+
+ /*
+ info("rid=%02x ds=%02x sm=%02x sl=%02x d=%02x nd=%02x\n",
+ poll_reply.report_id, poll_reply.data_state,
+ poll_reply.system_msb, poll_reply.system_lsb,
+ poll_reply.data, poll_reply.not_data);
+ */
+
+ if ((poll_reply.data + poll_reply.not_data) != 0xff) {
+ /* Key failed integrity check */
+ err("key failed integrity check: %02x %02x %02x %02x",
+ poll_reply.system_msb, poll_reply.system_lsb,
+ poll_reply.data, poll_reply.not_data);
+ return -1;
+ }
+
+ /* Find the key in the map */
+ for (i = 0; i < d->props.rc_key_map_size; i++) {
+ if (keymap[i].custom == poll_reply.system_lsb &&
+ keymap[i].data == poll_reply.data) {
+ *event = keymap[i].event;
+ found = 1;
+ break;
+ }
+ }
+
+ if (found == 0) {
+ err("Unknown remote controller key: %02x %02x %02x %02x",
+ poll_reply.system_msb, poll_reply.system_lsb,
+ poll_reply.data, poll_reply.not_data);
+ d->last_event = 0;
+ return 0;
+ }
+
+ if (poll_reply.data_state == 1) {
+ /* New key hit */
+ st->rc_counter = 0;
+ *event = keymap[i].event;
+ *state = REMOTE_KEY_PRESSED;
+ d->last_event = keymap[i].event;
+ } else if (poll_reply.data_state == 2) {
+ /* Key repeated */
+ st->rc_counter++;
+
+ /* prevents unwanted double hits */
+ if (st->rc_counter > RC_REPEAT_DELAY_V1_20) {
+ *event = d->last_event;
+ *state = REMOTE_KEY_PRESSED;
+ st->rc_counter = RC_REPEAT_DELAY_V1_20;
+ }
+ } else {
+ err("Unknown data state [%d]", poll_reply.data_state);
+ }
+
+ return 0;
+}
+
+static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
+{
+ struct dib0700_state *st = d->priv;
+
+ /* Because some people may have improperly named firmware files,
+ let's figure out whether to use the new firmware call or the legacy
+ call based on the firmware version embedded in the file */
+ if (st->rc_func_version == 0) {
+ u32 hwver, romver, ramver, fwtype;
+ int ret = dib0700_get_version(d, &hwver, &romver, &ramver,
+ &fwtype);
+ if (ret < 0) {
+ err("Could not determine version info");
+ return -1;
+ }
+ if (ramver < 0x10200)
+ st->rc_func_version = 1;
+ else
+ st->rc_func_version = 2;
+ }
+
+ if (st->rc_func_version == 2)
+ return dib0700_rc_query_v1_20(d, event, state);
+ else
+ return dib0700_rc_query_legacy(d, event, state);
}
static struct dvb_usb_rc_key dib0700_rc_keys[] = {
---
Patch is available at:
http://linuxtv.org/hg/v4l-dvb/rev/9d142344f9d1161ebd1e6a72496c8f06965112c0
_______________________________________________
linuxtv-commits mailing list
linuxtv-commits@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linuxtv-commits
