The patch number 11952 was added via Mauro Carvalho Chehab <mche...@redhat.com>
to http://linuxtv.org/hg/v4l-dvb master development tree.
Kernel patches in this development tree may be modified to be backward
compatible with older kernels. Compatibility modifications will be
removed before inclusion into the mainstream Kernel
If anyone has any objections, please let us know by sending a message to:
Linux Media Mailing List <linux-me...@vger.kernel.org>
------
From: Mauro Carvalho Chehab <mche...@redhat.com>
merge: http://linuxtv.org/hg/~awalls/v4l-dvb
Signed-off-by: Mauro Carvalho Chehab <mche...@redhat.com>
---
linux/drivers/media/video/cx18/cx18-cards.c | 63 ++++++++++++++++---
linux/drivers/media/video/cx18/cx18-driver.c | 3
linux/drivers/media/video/cx18/cx18-driver.h | 5 -
linux/drivers/media/video/cx18/cx18-dvb.c | 59 ++++++++++++++++-
4 files changed, 115 insertions(+), 15 deletions(-)
diff -r 8b9708d43261 -r 679f92507285 linux/drivers/media/video/cx18/cx18-cards.c
--- a/linux/drivers/media/video/cx18/cx18-cards.c Thu Jun 11 17:48:11
2009 -0300
+++ b/linux/drivers/media/video/cx18/cx18-cards.c Thu Jun 11 18:17:50
2009 -0300
@@ -351,13 +351,12 @@ static const struct cx18_card cx18_card_
static const struct cx18_card_pci_info cx18_pci_leadtek_pvr2100[] = {
{ PCI_DEVICE_ID_CX23418, CX18_PCI_ID_LEADTEK, 0x6f27 }, /* PVR2100 */
- { PCI_DEVICE_ID_CX23418, CX18_PCI_ID_LEADTEK, 0x6690 }, /* DVR3100 H */
{ 0, 0, 0 }
};
static const struct cx18_card cx18_card_leadtek_pvr2100 = {
.type = CX18_CARD_LEADTEK_PVR2100,
- .name = "Leadtek WinFast PVR2100/DVR3100 H",
+ .name = "Leadtek WinFast PVR2100",
.comment = "Experimenters and photos needed for device to work well.\n"
"\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n",
.v4l2_capabilities = CX18_CAP_ENCODER,
@@ -376,15 +375,12 @@ static const struct cx18_card cx18_card_
{ CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL1, 1 },
},
.tuners = {
- /* XC3028 tuner */
+ /* XC2028 tuner */
{ .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },
},
.radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 },
.ddr = {
- /*
- * Pointer to proper DDR config values provided by
- * Terry Wu <terrywu at leadtek.com.tw>
- */
+ /* Pointer to proper DDR config values provided by Terry Wu */
.chip_config = 0x303,
.refresh = 0x3bb,
.timing1 = 0x24220e83,
@@ -398,6 +394,58 @@ static const struct cx18_card cx18_card_
.tuner = 0x6, .linein = 0x2, .radio = 0x2 },
.xceive_pin = 15,
.pci_list = cx18_pci_leadtek_pvr2100,
+ .i2c = &cx18_i2c_std,
+};
+
+/* ------------------------------------------------------------------------- */
+
+/* Leadtek WinFast DVR3100 H */
+
+static const struct cx18_card_pci_info cx18_pci_leadtek_dvr3100h[] = {
+ { PCI_DEVICE_ID_CX23418, CX18_PCI_ID_LEADTEK, 0x6690 }, /* DVR3100 H */
+ { 0, 0, 0 }
+};
+
+static const struct cx18_card cx18_card_leadtek_dvr3100h = {
+ .type = CX18_CARD_LEADTEK_DVR3100H,
+ .name = "Leadtek WinFast DVR3100 H",
+ .comment = "Simultaneous DVB-T and Analog capture supported,\n"
+ "\texcept when capturing Analog from the antenna input.\n",
+ .v4l2_capabilities = CX18_CAP_ENCODER,
+ .hw_audio_ctrl = CX18_HW_418_AV,
+ .hw_muxer = CX18_HW_GPIO_MUX,
+ .hw_all = CX18_HW_418_AV | CX18_HW_TUNER | CX18_HW_GPIO_MUX |
+ CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL,
+ .video_inputs = {
+ { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE2 },
+ { CX18_CARD_INPUT_SVIDEO1, 1,
+ CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 },
+ { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE7 },
+ },
+ .audio_inputs = {
+ { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 0 },
+ { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL1, 1 },
+ },
+ .tuners = {
+ /* XC3028 tuner */
+ { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },
+ },
+ .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 },
+ .ddr = {
+ /* Pointer to proper DDR config values provided by Terry Wu */
+ .chip_config = 0x303,
+ .refresh = 0x3bb,
+ .timing1 = 0x24220e83,
+ .timing2 = 0x1f,
+ .tune_lane = 0,
+ .initial_emrs = 0x2,
+ },
+ .gpio_init.initial_value = 0x6,
+ .gpio_init.direction = 0x7,
+ .gpio_audio_input = { .mask = 0x7,
+ .tuner = 0x6, .linein = 0x2, .radio = 0x2 },
+ .xceive_pin = 1,
+ .pci_list = cx18_pci_leadtek_dvr3100h,
.i2c = &cx18_i2c_std,
};
@@ -411,6 +459,7 @@ static const struct cx18_card *cx18_card
&cx18_card_cnxt_raptor_pal,
&cx18_card_toshiba_qosmio_dvbt,
&cx18_card_leadtek_pvr2100,
+ &cx18_card_leadtek_dvr3100h,
};
const struct cx18_card *cx18_get_card(u16 index)
diff -r 8b9708d43261 -r 679f92507285
linux/drivers/media/video/cx18/cx18-driver.c
--- a/linux/drivers/media/video/cx18/cx18-driver.c Thu Jun 11 17:48:11
2009 -0300
+++ b/linux/drivers/media/video/cx18/cx18-driver.c Thu Jun 11 18:17:50
2009 -0300
@@ -152,7 +152,8 @@ MODULE_PARM_DESC(cardtype,
"\t\t\t 4 = Yuan MPC718\n"
"\t\t\t 5 = Conexant Raptor PAL/SECAM\n"
"\t\t\t 6 = Toshiba Qosmio DVB-T/Analog\n"
- "\t\t\t 7 = Leadtek WinFast PVR2100/DVR3100 H\n"
+ "\t\t\t 7 = Leadtek WinFast PVR2100\n"
+ "\t\t\t 8 = Leadtek WinFast DVR3100 H\n"
"\t\t\t 0 = Autodetect (default)\n"
"\t\t\t-1 = Ignore this card\n\t\t");
MODULE_PARM_DESC(pal, "Set PAL standard: B, G, H, D, K, I, M, N, Nc, 60");
diff -r 8b9708d43261 -r 679f92507285
linux/drivers/media/video/cx18/cx18-driver.h
--- a/linux/drivers/media/video/cx18/cx18-driver.h Thu Jun 11 17:48:11
2009 -0300
+++ b/linux/drivers/media/video/cx18/cx18-driver.h Thu Jun 11 18:17:50
2009 -0300
@@ -80,8 +80,9 @@
#define CX18_CARD_YUAN_MPC718 3 /* Yuan MPC718 */
#define CX18_CARD_CNXT_RAPTOR_PAL 4 /* Conexant Raptor PAL */
#define CX18_CARD_TOSHIBA_QOSMIO_DVBT 5 /* Toshiba Qosmio Interal
DVB-T/Analog*/
-#define CX18_CARD_LEADTEK_PVR2100 6 /* Leadtek WinFast PVR2100/DVR3100 H */
-#define CX18_CARD_LAST 6
+#define CX18_CARD_LEADTEK_PVR2100 6 /* Leadtek WinFast PVR2100 */
+#define CX18_CARD_LEADTEK_DVR3100H 7 /* Leadtek WinFast DVR3100 H */
+#define CX18_CARD_LAST 7
#define CX18_ENC_STREAM_TYPE_MPG 0
#define CX18_ENC_STREAM_TYPE_TS 1
diff -r 8b9708d43261 -r 679f92507285 linux/drivers/media/video/cx18/cx18-dvb.c
--- a/linux/drivers/media/video/cx18/cx18-dvb.c Thu Jun 11 17:48:11 2009 -0300
+++ b/linux/drivers/media/video/cx18/cx18-dvb.c Thu Jun 11 18:17:50 2009 -0300
@@ -26,12 +26,17 @@
#include "cx18-queue.h"
#include "cx18-streams.h"
#include "cx18-cards.h"
+#include "cx18-gpio.h"
#include "s5h1409.h"
#include "mxl5005s.h"
+#include "zl10353.h"
+#include "tuner-xc2028.h"
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
#define CX18_REG_DMUX_NUM_PORT_0_CONTROL 0xd5a000
+#define CX18_CLOCK_ENABLE2 0xc71024
+#define CX18_DMUX_CLK_MASK 0x0080
static struct mxl5005s_config hauppauge_hvr1600_tuner = {
.i2c_address = 0xC6 >> 1,
@@ -58,7 +63,15 @@ static struct s5h1409_config hauppauge_h
.inversion = S5H1409_INVERSION_OFF,
.status_mode = S5H1409_DEMODLOCKING,
.mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK
-
+};
+
+/* Information/confirmation of proper config values provided by Terry Wu */
+static struct zl10353_config leadtek_dvr3100h_demod = {
+ .demod_address = 0x1e >> 1, /* Datasheet suggested straps */
+ .if2 = 45600, /* 4.560 MHz IF from the XC3028 */
+ .parallel_ts = 1, /* Not a serial TS */
+ .no_tuner = 1, /* XC3028 is not behind the gate */
+ .disable_i2c_gate_ctrl = 1, /* Disable the I2C gate */
};
static int dvb_register(struct cx18_stream *stream);
@@ -99,6 +112,7 @@ static int cx18_dvb_start_feed(struct dv
cx18_write_reg(cx, v, CX18_REG_DMUX_NUM_PORT_0_CONTROL);
break;
+ case CX18_CARD_LEADTEK_DVR3100H:
default:
/* Assumption - Parallel transport - Signalling
* undefined or default.
@@ -268,8 +282,7 @@ void cx18_dvb_unregister(struct cx18_str
}
/* All the DVB attach calls go here, this function get's modified
- * for each new card. No other function in this file needs
- * to change.
+ * for each new card. cx18_dvb_start_feed() will also need changes.
*/
static int dvb_register(struct cx18_stream *stream)
{
@@ -290,6 +303,29 @@ static int dvb_register(struct cx18_stre
ret = 0;
}
break;
+ case CX18_CARD_LEADTEK_DVR3100H:
+ dvb->fe = dvb_attach(zl10353_attach,
+ &leadtek_dvr3100h_demod,
+ &cx->i2c_adap[1]);
+ if (dvb->fe != NULL) {
+ struct dvb_frontend *fe;
+ struct xc2028_config cfg = {
+ .i2c_adap = &cx->i2c_adap[1],
+ .i2c_addr = 0xc2 >> 1,
+ .ctrl = NULL,
+ };
+ static struct xc2028_ctrl ctrl = {
+ .fname = XC2028_DEFAULT_FIRMWARE,
+ .max_len = 64,
+ .demod = XC3028_FE_ZARLINK456,
+ .type = XC2028_AUTO,
+ };
+
+ fe = dvb_attach(xc2028_attach, dvb->fe, &cfg);
+ if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
+ fe->ops.tuner_ops.set_config(fe, &ctrl);
+ }
+ break;
default:
/* No Digital Tv Support */
break;
@@ -299,6 +335,8 @@ static int dvb_register(struct cx18_stre
CX18_ERR("frontend initialization failed\n");
return -1;
}
+
+ dvb->fe->callback = cx18_reset_tuner_gpio;
ret = dvb_register_frontend(&dvb->dvb_adapter, dvb->fe);
if (ret < 0) {
@@ -307,5 +345,16 @@ static int dvb_register(struct cx18_stre
return ret;
}
- return ret;
-}
+ /*
+ * The firmware seems to enable the TS DMUX clock
+ * under various circumstances. However, since we know we
+ * might use it, let's just turn it on ourselves here.
+ */
+ cx18_write_reg_expect(cx,
+ (CX18_DMUX_CLK_MASK << 16) | CX18_DMUX_CLK_MASK,
+ CX18_CLOCK_ENABLE2,
+ CX18_DMUX_CLK_MASK,
+ (CX18_DMUX_CLK_MASK << 16) | CX18_DMUX_CLK_MASK);
+
+ return ret;
+}
---
Patch is available at:
http://linuxtv.org/hg/v4l-dvb/rev/679f92507285e1a5f31eef7b9001e21dd6c58fd5
_______________________________________________
linuxtv-commits mailing list
linuxtv-commits@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linuxtv-commits
