The patch number 12295 was added via Mauro Carvalho Chehab <mche...@redhat.com>
to http://linuxtv.org/hg/v4l-dvb master development tree.
Kernel patches in this development tree may be modified to be backward
compatible with older kernels. Compatibility modifications will be
removed before inclusion into the mainstream Kernel
If anyone has any objections, please let us know by sending a message to:
Linux Media Mailing List <linux-me...@vger.kernel.org>
------
From: Mauro Carvalho Chehab <mche...@redhat.com>
merge: http://linuxtv.org/hg/~tap/v4l-dvb
Signed-off-by: Mauro Carvalho Chehab <mche...@redhat.com>
---
linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c | 283 +++++-----------
linux/drivers/media/dvb/frontends/dvb-pll.c | 75 ++++
linux/drivers/media/dvb/frontends/dvb-pll.h | 4
3 files changed, 172 insertions(+), 190 deletions(-)
diff -r 1cb6f19d2c9d -r 9ebb6e8b085e
linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
--- a/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c Sun Jul 19 18:03:23
2009 -0300
+++ b/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c Mon Jul 20 21:34:47
2009 -0300
@@ -20,8 +20,14 @@
#include "tuner-simple.h"
#include "stv0297.h"
+
+/* Can we use the specified front-end? Remember that if we are compiled
+ * into the kernel we can't call code that's in modules. */
+#define FE_SUPPORTED(fe) (defined(CONFIG_DVB_##fe) || \
+ (defined(CONFIG_DVB_##fe##_MODULE) && defined(MODULE)))
+
/* lnb control */
-#if defined(CONFIG_DVB_MT312_MODULE) || defined(CONFIG_DVB_STV0299_MODULE)
+#if FE_SUPPORTED(MT312) || FE_SUPPORTED(STV0299)
static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t
voltage)
{
struct flexcop_device *fc = fe->dvb->priv;
@@ -49,8 +55,7 @@ static int flexcop_set_voltage(struct dv
}
#endif
-#if defined(CONFIG_DVB_S5H1420_MODULE) || defined(CONFIG_DVB_STV0299_MODULE) \
- || defined(CONFIG_DVB_MT312_MODULE)
+#if FE_SUPPORTED(S5H1420) || FE_SUPPORTED(STV0299) || FE_SUPPORTED(MT312)
static int flexcop_sleep(struct dvb_frontend* fe)
{
struct flexcop_device *fc = fe->dvb->priv;
@@ -61,7 +66,7 @@ static int flexcop_sleep(struct dvb_fron
#endif
/* SkyStar2 DVB-S rev 2.3 */
-#if defined(CONFIG_DVB_MT312_MODULE)
+#if FE_SUPPORTED(MT312) && FE_SUPPORTED(PLL)
static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
{
/* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */
@@ -150,53 +155,34 @@ static struct mt312_config skystar23_sam
.demod_address = 0x0e,
};
-static int skystar23_samsung_tbdu18132_tuner_set_params(struct dvb_frontend
*fe,
- struct dvb_frontend_parameters *params)
-{
- u8 buf[4];
- u32 div;
- struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf,
- .len = sizeof(buf) };
- struct flexcop_device *fc = fe->dvb->priv;
- div = (params->frequency + (125/2)) / 125;
-
- buf[0] = (div >> 8) & 0x7f;
- buf[1] = (div >> 0) & 0xff;
- buf[2] = 0x84 | ((div >> 10) & 0x60);
- buf[3] = 0x80;
-
- if (params->frequency < 1550000)
- buf[3] |= 0x02;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- if (i2c_transfer(&fc->fc_i2c_adap[0].i2c_adap, &msg, 1) != 1)
- return -EIO;
- return 0;
-}
-
static int skystar2_rev23_attach(struct flexcop_device *fc,
struct i2c_adapter *i2c)
{
+ struct dvb_frontend_ops *ops;
+
fc->fe = dvb_attach(mt312_attach, &skystar23_samsung_tbdu18132_config,
i2c);
- if (fc->fe != NULL) {
- struct dvb_frontend_ops *ops = &fc->fe->ops;
- ops->tuner_ops.set_params =
- skystar23_samsung_tbdu18132_tuner_set_params;
- ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;
- ops->diseqc_send_burst = flexcop_diseqc_send_burst;
- ops->set_tone = flexcop_set_tone;
- ops->set_voltage = flexcop_set_voltage;
- fc->fe_sleep = ops->sleep;
- ops->sleep = flexcop_sleep;
- return 1;
- }
- return 0;
-}
+ if (!fc->fe)
+ return 0;
+
+ if (!dvb_attach(dvb_pll_attach, fc->fe, 0x61, i2c,
+ DVB_PLL_SAMSUNG_TBDU18132))
+ return 0;
+
+ ops = &fc->fe->ops;
+ ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;
+ ops->diseqc_send_burst = flexcop_diseqc_send_burst;
+ ops->set_tone = flexcop_set_tone;
+ ops->set_voltage = flexcop_set_voltage;
+ fc->fe_sleep = ops->sleep;
+ ops->sleep = flexcop_sleep;
+ return 1;
+}
+#else
+#define skystar2_rev23_attach NULL
#endif
/* SkyStar2 DVB-S rev 2.6 */
-#if defined(CONFIG_DVB_STV0299_MODULE)
+#if FE_SUPPORTED(STV0299) && FE_SUPPORTED(PLL)
static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend *fe,
u32 srate, u32 ratio)
{
@@ -222,31 +208,6 @@ static int samsung_tbmu24112_set_symbol_
stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
stv0299_writereg(fe, 0x21, ratio & 0xf0);
- return 0;
-}
-
-static int samsung_tbmu24112_tuner_set_params(struct dvb_frontend *fe,
- struct dvb_frontend_parameters *params)
-{
- u8 buf[4];
- u32 div;
- struct i2c_msg msg = {
- .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
- struct flexcop_device *fc = fe->dvb->priv;
- div = params->frequency / 125;
-
- buf[0] = (div >> 8) & 0x7f;
- buf[1] = div & 0xff;
- buf[2] = 0x84; /* 0xC4 */
- buf[3] = 0x08;
-
- if (params->frequency < 1500000)
- buf[3] |= 0x10;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- if (i2c_transfer(&fc->fc_i2c_adap[0].i2c_adap, &msg, 1) != 1)
- return -EIO;
return 0;
}
@@ -311,20 +272,25 @@ static int skystar2_rev26_attach(struct
struct i2c_adapter *i2c)
{
fc->fe = dvb_attach(stv0299_attach, &samsung_tbmu24112_config, i2c);
- if (fc->fe != NULL) {
- struct dvb_frontend_ops *ops = &fc->fe->ops;
- ops->tuner_ops.set_params = samsung_tbmu24112_tuner_set_params;
- ops->set_voltage = flexcop_set_voltage;
- fc->fe_sleep = ops->sleep;
- ops->sleep = flexcop_sleep;
- return 1;
- }
- return 0;
-}
+ if (!fc->fe)
+ return 0;
+
+ if (!dvb_attach(dvb_pll_attach, fc->fe, 0x61, i2c,
+ DVB_PLL_SAMSUNG_TBMU24112))
+ return 0;
+
+ fc->fe->ops.set_voltage = flexcop_set_voltage;
+ fc->fe_sleep = fc->fe->ops.sleep;
+ fc->fe->ops.sleep = flexcop_sleep;
+ return 1;
+
+}
+#else
+#define skystar2_rev26_attach NULL
#endif
/* SkyStar2 DVB-S rev 2.7 */
-#if defined(CONFIG_DVB_S5H1420_MODULE)
+#if FE_SUPPORTED(S5H1420) && FE_SUPPORTED(ISL6421) &&
FE_SUPPORTED(TUNER_ITD1000)
static struct s5h1420_config skystar2_rev2_7_s5h1420_config = {
.demod_address = 0x53,
.invert = 1,
@@ -385,10 +351,12 @@ fail:
fc->fc_i2c_adap[0].no_base_addr = 0;
return 0;
}
+#else
+#define skystar2_rev27_attach NULL
#endif
/* SkyStar2 rev 2.8 */
-#if defined(CONFIG_DVB_CX24123_MODULE)
+#if FE_SUPPORTED(CX24123) && FE_SUPPORTED(ISL6421) &&
FE_SUPPORTED(TUNER_CX24113)
static struct cx24123_config skystar2_rev2_8_cx24123_config = {
.demod_address = 0x55,
.dont_use_pll = 1,
@@ -433,10 +401,12 @@ static int skystar2_rev28_attach(struct
* IR-receiver (PIC16F818) - but the card has no input for that ??? */
return 1;
}
+#else
+#define skystar2_rev28_attach NULL
#endif
/* AirStar DVB-T */
-#if defined(CONFIG_DVB_MT352_MODULE)
+#if FE_SUPPORTED(MT352) && FE_SUPPORTED(PLL)
static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend *fe)
{
static u8 mt352_clock_config[] = { 0x89, 0x18, 0x2d };
@@ -454,32 +424,6 @@ static int samsung_tdtc9251dh0_demod_ini
return 0;
}
-static int samsung_tdtc9251dh0_calc_regs(struct dvb_frontend *fe,
- struct dvb_frontend_parameters *params, u8* pllbuf, int buf_len)
-{
- u32 div;
- unsigned char bs = 0;
-
- if (buf_len < 5)
- return -EINVAL;
-
-#define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */
- div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
- if (params->frequency >= 48000000 && params->frequency <= 154000000) \
- bs = 0x09;
- if (params->frequency >= 161000000 && params->frequency <= 439000000) \
- bs = 0x0a;
- if (params->frequency >= 447000000 && params->frequency <= 863000000) \
- bs = 0x08;
-
- pllbuf[0] = 0x61;
- pllbuf[1] = div >> 8;
- pllbuf[2] = div & 0xff;
- pllbuf[3] = 0xcc;
- pllbuf[4] = bs;
- return 5;
-}
-
static struct mt352_config samsung_tdtc9251dh0_config = {
.demod_address = 0x0f,
.demod_init = samsung_tdtc9251dh0_demod_init,
@@ -489,16 +433,18 @@ static int airstar_dvbt_attach(struct fl
struct i2c_adapter *i2c)
{
fc->fe = dvb_attach(mt352_attach, &samsung_tdtc9251dh0_config, i2c);
- if (fc->fe != NULL) {
- fc->fe->ops.tuner_ops.calc_regs = samsung_tdtc9251dh0_calc_regs;
- return 1;
- }
- return 0;
-}
+ if (!fc->fe)
+ return 0;
+
+ return !!dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL,
+ DVB_PLL_SAMSUNG_TDTC9251DH0);
+}
+#else
+#define airstar_dvbt_attach NULL
#endif
/* AirStar ATSC 1st generation */
-#if defined(CONFIG_DVB_BCM3510_MODULE)
+#if FE_SUPPORTED(BCM3510)
static int flexcop_fe_request_firmware(struct dvb_frontend *fe,
const struct firmware **fw, char* name)
{
@@ -517,10 +463,12 @@ static int airstar_atsc1_attach(struct f
fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, i2c);
return fc->fe != NULL;
}
+#else
+#define airstar_atsc1_attach NULL
#endif
/* AirStar ATSC 2nd generation */
-#if defined(CONFIG_DVB_NXT200X_MODULE)
+#if FE_SUPPORTED(NXT200X) && FE_SUPPORTED(PLL)
static struct nxt200x_config samsung_tbmv_config = {
.demod_address = 0x0a,
};
@@ -535,10 +483,12 @@ static int airstar_atsc2_attach(struct f
return !!dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL,
DVB_PLL_SAMSUNG_TBMV);
}
+#else
+#define airstar_atsc2_attach NULL
#endif
/* AirStar ATSC 3rd generation */
-#if defined(CONFIG_DVB_LGDT330X_MODULE)
+#if FE_SUPPORTED(LGDT330X)
static struct lgdt330x_config air2pc_atsc_hd5000_config = {
.demod_address = 0x59,
.demod_chip = LGDT3303,
@@ -556,57 +506,12 @@ static int airstar_atsc3_attach(struct f
return !!dvb_attach(simple_tuner_attach, fc->fe, i2c, 0x61,
TUNER_LG_TDVS_H06XF);
}
+#else
+#define airstar_atsc3_attach NULL
#endif
/* CableStar2 DVB-C */
-#if defined(CONFIG_DVB_STV0297_MODULE)
-static int alps_tdee4_stv0297_tuner_set_params(struct dvb_frontend* fe,
- struct dvb_frontend_parameters *fep)
-{
- struct flexcop_device *fc = fe->dvb->priv;
- u8 buf[4];
- u16 div;
- int ret;
-
-/* 62.5 kHz * 10 */
-#define REF_FREQ 625
-#define FREQ_OFFSET 36125
-
- div = ((fep->frequency/1000 + FREQ_OFFSET) * 10) / REF_FREQ;
-/* 4 MHz = 4000 KHz */
-
- buf[0] = (u8)( div >> 8) & 0x7f;
- buf[1] = (u8) div & 0xff;
-
-/* F(osc) = N * Reference Freq. (62.5 kHz)
- * byte 2 : 0 N14 N13 N12 N11 N10 N9 N8
- * byte 3 : N7 N6 N5 N4 N3 N2 N1 N0
- * byte 4 : 1 * * AGD R3 R2 R1 R0
- * byte 5 : C1 * RE RTS BS4 BS3 BS2 BS1
- * AGD = 1, R3 R2 R1 R0 = 0 1 0 1 => byte 4 = 1**10101 = 0x95 */
- buf[2] = 0x95;
-
-/* Range(MHz) C1 * RE RTS BS4 BS3 BS2 BS1 Byte 5
- * 47 - 153 0 * 0 0 0 0 0 1 0x01
- * 153 - 430 0 * 0 0 0 0 1 0 0x02
- * 430 - 822 0 * 0 0 1 0 0 0 0x08
- * 822 - 862 1 * 0 0 1 0 0 0 0x88 */
-
- if (fep->frequency <= 153000000) buf[3] = 0x01;
- else if (fep->frequency <= 430000000) buf[3] = 0x02;
- else if (fep->frequency <= 822000000) buf[3] = 0x08;
- else buf[3] = 0x88;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0);
- deb_tuner("tuner buffer for %d Hz: %x %x %x %x\n", fep->frequency,
- buf[0], buf[1], buf[2], buf[3]);
- ret = fc->i2c_request(&fc->fc_i2c_adap[2],
- FC_WRITE, 0x61, buf[0], &buf[1], 3);
- deb_tuner("tuner write returned: %d\n",ret);
- return ret;
-}
-
+#if FE_SUPPORTED(STV0297) && FE_SUPPORTED(PLL)
static u8 alps_tdee4_stv0297_inittab[] = {
0x80, 0x01,
0x80, 0x00,
@@ -690,47 +595,43 @@ static int cablestar2_attach(struct flex
{
fc->fc_i2c_adap[0].no_base_addr = 1;
fc->fe = dvb_attach(stv0297_attach, &alps_tdee4_stv0297_config, i2c);
- if (!fc->fe) {
- /* Reset for next frontend to try */
- fc->fc_i2c_adap[0].no_base_addr = 0;
- return 0;
- }
- fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params;
+ if (!fc->fe)
+ goto fail;
+
+ /* This tuner doesn't use the stv0297's I2C gate, but instead the
+ * tuner is connected to a different flexcop I2C adapter. */
+ if (fc->fe->ops.i2c_gate_ctrl)
+ fc->fe->ops.i2c_gate_ctrl(fc->fe, 0);
+ fc->fe->ops.i2c_gate_ctrl = NULL;
+
+ if (!dvb_attach(dvb_pll_attach, fc->fe, 0x61,
+ fc->fc_i2c_adap[2].i2c_adap, DVB_PLL_TDEE4))
+ goto fail;
+
return 1;
-}
+
+fail:
+ /* Reset for next frontend to try */
+ fc->fc_i2c_adap[0].no_base_addr = 0;
+ return 0;
+}
+#else
+#define cablestar2_attach NULL
#endif
static struct {
flexcop_device_type_t type;
int (*attach)(struct flexcop_device *, struct i2c_adapter *);
} flexcop_frontends[] = {
-#if defined(CONFIG_DVB_S5H1420_MODULE)
{ FC_SKY_REV27, skystar2_rev27_attach },
-#endif
-#if defined(CONFIG_DVB_CX24123_MODULE)
{ FC_SKY_REV28, skystar2_rev28_attach },
-#endif
-#if defined(CONFIG_DVB_STV0299_MODULE)
{ FC_SKY_REV26, skystar2_rev26_attach },
-#endif
-#if defined(CONFIG_DVB_MT352_MODULE)
{ FC_AIR_DVBT, airstar_dvbt_attach },
-#endif
-#if defined(CONFIG_DVB_NXT200X_MODULE)
{ FC_AIR_ATSC2, airstar_atsc2_attach },
-#endif
-#if defined(CONFIG_DVB_LGDT330X_MODULE)
{ FC_AIR_ATSC3, airstar_atsc3_attach },
-#endif
-#if defined(CONFIG_DVB_BCM3510_MODULE)
{ FC_AIR_ATSC1, airstar_atsc1_attach },
-#endif
-#if defined(CONFIG_DVB_STV0297_MODULE)
{ FC_CABLE, cablestar2_attach },
-#endif
-#if defined(CONFIG_DVB_MT312_MODULE)
{ FC_SKY_REV23, skystar2_rev23_attach },
-#endif
};
/* try to figure out the frontend */
@@ -738,6 +639,8 @@ int flexcop_frontend_init(struct flexcop
{
int i;
for (i = 0; i < ARRAY_SIZE(flexcop_frontends); i++) {
+ if (!flexcop_frontends[i].attach)
+ continue;
/* type needs to be set before, because of some workarounds
* done based on the probed card type */
fc->dev_type = flexcop_frontends[i].type;
diff -r 1cb6f19d2c9d -r 9ebb6e8b085e linux/drivers/media/dvb/frontends/dvb-pll.c
--- a/linux/drivers/media/dvb/frontends/dvb-pll.c Sun Jul 19 18:03:23
2009 -0300
+++ b/linux/drivers/media/dvb/frontends/dvb-pll.c Mon Jul 20 21:34:47
2009 -0300
@@ -390,6 +390,77 @@ static struct dvb_pll_desc dvb_pll_samsu
}
};
+/* Samsung TDTC9251DH0 DVB-T NIM, as used on AirStar 2 */
+static struct dvb_pll_desc dvb_pll_samsung_tdtc9251dh0 = {
+ .name = "Samsung TDTC9251DH0",
+ .min = 48000000,
+ .max = 863000000,
+ .iffreq = 36166667,
+ .count = 3,
+ .entries = {
+ { 157500000, 166667, 0xcc, 0x09 },
+ { 443000000, 166667, 0xcc, 0x0a },
+ { 863000000, 166667, 0xcc, 0x08 },
+ }
+};
+
+/* Samsung TBDU18132 DVB-S NIM with TSA5059 PLL, used in SkyStar2 DVB-S 2.3 */
+static struct dvb_pll_desc dvb_pll_samsung_tbdu18132 = {
+ .name = "Samsung TBDU18132",
+ .min = 950000,
+ .max = 2150000, /* guesses */
+ .iffreq = 0,
+ .count = 2,
+ .entries = {
+ { 1550000, 125, 0x84, 0x82 },
+ { 4095937, 125, 0x84, 0x80 },
+ }
+ /* TSA5059 PLL has a 17 bit divisor rather than the 15 bits supported
+ * by this driver. The two extra bits are 0x60 in the third byte. 15
+ * bits is enough for over 4 GHz, which is enough to cover the range
+ * of this tuner. We could use the additional divisor bits by adding
+ * more entries, e.g.
+ { 0x0ffff * 125 + 125/2, 125, 0x84 | 0x20, },
+ { 0x17fff * 125 + 125/2, 125, 0x84 | 0x40, },
+ { 0x1ffff * 125 + 125/2, 125, 0x84 | 0x60, }, */
+};
+
+/* Samsung TBMU24112 DVB-S NIM with SL1935 zero-IF tuner */
+static struct dvb_pll_desc dvb_pll_samsung_tbmu24112 = {
+ .name = "Samsung TBMU24112",
+ .min = 950000,
+ .max = 2150000, /* guesses */
+ .iffreq = 0,
+ .count = 2,
+ .entries = {
+ { 1500000, 125, 0x84, 0x18 },
+ { 9999999, 125, 0x84, 0x08 },
+ }
+};
+
+/* Alps TDEE4 DVB-C NIM, used on Cablestar 2 */
+/* byte 4 : 1 * * AGD R3 R2 R1 R0
+ * byte 5 : C1 * RE RTS BS4 BS3 BS2 BS1
+ * AGD = 1, R3 R2 R1 R0 = 0 1 0 1 => byte 4 = 1**10101 = 0x95
+ * Range(MHz) C1 * RE RTS BS4 BS3 BS2 BS1 Byte 5
+ * 47 - 153 0 * 0 0 0 0 0 1 0x01
+ * 153 - 430 0 * 0 0 0 0 1 0 0x02
+ * 430 - 822 0 * 0 0 1 0 0 0 0x08
+ * 822 - 862 1 * 0 0 1 0 0 0 0x88 */
+static struct dvb_pll_desc dvb_pll_alps_tdee4 = {
+ .name = "ALPS TDEE4",
+ .min = 47000000,
+ .max = 862000000,
+ .iffreq = 36125000,
+ .count = 4,
+ .entries = {
+ { 153000000, 62500, 0x95, 0x01 },
+ { 430000000, 62500, 0x95, 0x02 },
+ { 822000000, 62500, 0x95, 0x08 },
+ { 999999999, 62500, 0x95, 0x88 },
+ }
+};
+
/* ----------------------------------------------------------- */
static struct dvb_pll_desc *pll_list[] = {
@@ -403,11 +474,15 @@ static struct dvb_pll_desc *pll_list[] =
[DVB_PLL_TUA6034] = &dvb_pll_tua6034,
[DVB_PLL_TDA665X] = &dvb_pll_tda665x,
[DVB_PLL_TDED4] = &dvb_pll_tded4,
+ [DVB_PLL_TDEE4] = &dvb_pll_alps_tdee4,
[DVB_PLL_TDHU2] = &dvb_pll_tdhu2,
[DVB_PLL_SAMSUNG_TBMV] = &dvb_pll_samsung_tbmv,
[DVB_PLL_PHILIPS_SD1878_TDA8261] = &dvb_pll_philips_sd1878_tda8261,
[DVB_PLL_OPERA1] = &dvb_pll_opera1,
[DVB_PLL_SAMSUNG_DTOS403IH102A] = &dvb_pll_samsung_dtos403ih102a,
+ [DVB_PLL_SAMSUNG_TDTC9251DH0] = &dvb_pll_samsung_tdtc9251dh0,
+ [DVB_PLL_SAMSUNG_TBDU18132] = &dvb_pll_samsung_tbdu18132,
+ [DVB_PLL_SAMSUNG_TBMU24112] = &dvb_pll_samsung_tbmu24112,
};
/* ----------------------------------------------------------- */
diff -r 1cb6f19d2c9d -r 9ebb6e8b085e linux/drivers/media/dvb/frontends/dvb-pll.h
--- a/linux/drivers/media/dvb/frontends/dvb-pll.h Sun Jul 19 18:03:23
2009 -0300
+++ b/linux/drivers/media/dvb/frontends/dvb-pll.h Mon Jul 20 21:34:47
2009 -0300
@@ -23,6 +23,10 @@
#define DVB_PLL_PHILIPS_SD1878_TDA8261 12
#define DVB_PLL_OPERA1 13
#define DVB_PLL_SAMSUNG_DTOS403IH102A 14
+#define DVB_PLL_SAMSUNG_TDTC9251DH0 15
+#define DVB_PLL_SAMSUNG_TBDU18132 16
+#define DVB_PLL_SAMSUNG_TBMU24112 17
+#define DVB_PLL_TDEE4 18
/**
* Attach a dvb-pll to the supplied frontend structure.
---
Patch is available at:
http://linuxtv.org/hg/v4l-dvb/rev/9ebb6e8b085ed7d08eb3b5b4a6f8ece5dc514221
_______________________________________________
linuxtv-commits mailing list
linuxtv-commits@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linuxtv-commits
