From: Tony Lindgren <[email protected]> 3630 has more mux signals than 34xx. The additional pins exist in omap36xx_cbp_subset, but are not initialized as the superset is missing these offsets. This causes the following errors during the boot:
mux: Unknown entry offset 0x236 mux: Unknown entry offset 0x22e mux: Unknown entry offset 0x1ec mux: Unknown entry offset 0x1ee mux: Unknown entry offset 0x1f4 mux: Unknown entry offset 0x1f6 mux: Unknown entry offset 0x1f8 mux: Unknown entry offset 0x1fa mux: Unknown entry offset 0x1fc mux: Unknown entry offset 0x22a mux: Unknown entry offset 0x226 mux: Unknown entry offset 0x230 mux: Unknown entry offset 0x22c mux: Unknown entry offset 0x228 Fix this by adding the missing offsets to omap3 superset. Note that additionally the uninitialized pins need to be skipped on 34xx. Based on an earlier patch by Allen Pais <[email protected]>. Reported-by: Allen Pais <[email protected]> Signed-off-by: Allen Pais <[email protected]> Signed-off-by: Tony Lindgren <[email protected]> arch/arm/mach-omap2/mux.c | 7 ++++++ arch/arm/mach-omap2/mux34xx.c | 47 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 54 insertions(+), 0 deletions(-) --- http://git.linuxtv.org/v4l-dvb.git?a=commitdiff;h=9ecef433204f9b06550dd45cf84f14706f8fe4f0 diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 3f59bd1..19001dd 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -968,6 +968,13 @@ static void __init omap_mux_init_list(struct omap_mux *superset) } #endif +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) + if (!superset->muxnames || !superset->muxnames[0]) { + superset++; + continue; + } +#endif + entry = omap_mux_list_add(superset); if (!entry) { printk(KERN_ERR "mux: Could not add entry\n"); diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c index 68e0a59..07aa7b3 100644 --- a/arch/arm/mach-omap2/mux34xx.c +++ b/arch/arm/mach-omap2/mux34xx.c @@ -649,6 +649,53 @@ static struct omap_mux __initdata omap3_muxmodes[] = { _OMAP3_MUXENTRY(UART3_TX_IRTX, 166, "uart3_tx_irtx", NULL, NULL, NULL, "gpio_166", NULL, NULL, "safe_mode"), + + /* Only on 3630, see omap36xx_cbp_subset for the signals */ + _OMAP3_MUXENTRY(GPMC_A11, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MBUSFLAG, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MREAD, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MWRITE, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_SBUSFLAG, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_SREAD, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_SWRITE, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(GPMC_A11, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD28, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD29, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD32, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD33, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD34, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD35, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD36, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), { .reg_offset = OMAP_MUX_TERMINATOR }, }; _______________________________________________ linuxtv-commits mailing list [email protected] http://www.linuxtv.org/cgi-bin/mailman/listinfo/linuxtv-commits
