This is an automatic generated email to let you know that the following patch were queued at the http://git.linuxtv.org/v4l-dvb.git tree:
Subject: V4L/DVB: gspca - sn9c20x: Add support for camera LEDs Author: Brian Johnson <brij...@gmail.com> Date: Tue Mar 16 13:58:27 2010 -0300 Signed-off-by: Brian Johnson <brij...@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mche...@redhat.com> drivers/media/video/gspca/sn9c20x.c | 18 +++++++++++++++--- 1 files changed, 15 insertions(+), 3 deletions(-) --- http://git.linuxtv.org/v4l-dvb.git?a=commitdiff;h=77f22fb1ef99e82f4bf23e380de47c8096fc8bf8 diff --git a/drivers/media/video/gspca/sn9c20x.c b/drivers/media/video/gspca/sn9c20x.c index 5bd7fb4..3bdcbdb 100644 --- a/drivers/media/video/gspca/sn9c20x.c +++ b/drivers/media/video/gspca/sn9c20x.c @@ -53,6 +53,7 @@ MODULE_LICENSE("GPL"); /* camera flags */ #define HAS_BUTTON 0x1 +#define LED_REVERSE 0x2 /* some cameras unset gpio to turn on leds */ /* specific webcam descriptor */ struct sd { @@ -730,7 +731,8 @@ static u16 bridge_init[][2] = { {0x11be, 0xf0}, {0x11bf, 0x00}, {0x118c, 0x1f}, {0x118d, 0x1f}, {0x118e, 0x1f}, {0x118f, 0x1f}, {0x1180, 0x01}, {0x1181, 0x00}, {0x1182, 0x01}, - {0x1183, 0x00}, {0x1184, 0x50}, {0x1185, 0x80} + {0x1183, 0x00}, {0x1184, 0x50}, {0x1185, 0x80}, + {0x1007, 0x00} }; /* Gain = (bit[3:0] / 16 + 1) * (bit[4] + 1) * (bit[5] + 1) * (bit[6] + 1) */ @@ -1973,6 +1975,11 @@ static int sd_init(struct gspca_dev *gspca_dev) } } + if (sd->flags & LED_REVERSE) + reg_w1(gspca_dev, 0x1006, 0x00); + else + reg_w1(gspca_dev, 0x1006, 0x20); + if (reg_w(gspca_dev, 0x10c0, i2c_init, 9) < 0) { err("Device initialization failed"); return -ENODEV; @@ -2153,6 +2160,8 @@ static int sd_start(struct gspca_dev *gspca_dev) set_exposure(gspca_dev); set_hvflip(gspca_dev); + reg_w1(gspca_dev, 0x1007, 0x20); + reg_r(gspca_dev, 0x1061, 1); reg_w1(gspca_dev, 0x1061, gspca_dev->usb_buf[0] | 0x02); return 0; @@ -2160,6 +2169,8 @@ static int sd_start(struct gspca_dev *gspca_dev) static void sd_stopN(struct gspca_dev *gspca_dev) { + reg_w1(gspca_dev, 0x1007, 0x00); + reg_r(gspca_dev, 0x1061, 1); reg_w1(gspca_dev, 0x1061, gspca_dev->usb_buf[0] & ~0x02); } @@ -2349,7 +2360,7 @@ static const struct sd_desc sd_desc = { }; #define SN9C20X(sensor, i2c_addr, flags) \ - .driver_info = (flags << 16) \ + .driver_info = ((flags & 0xff) << 16) \ | (SENSOR_ ## sensor << 8) \ | (i2c_addr) @@ -2357,7 +2368,8 @@ static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x0c45, 0x6240), SN9C20X(MT9M001, 0x5d, 0)}, {USB_DEVICE(0x0c45, 0x6242), SN9C20X(MT9M111, 0x5d, 0)}, {USB_DEVICE(0x0c45, 0x6248), SN9C20X(OV9655, 0x30, 0)}, - {USB_DEVICE(0x0c45, 0x624e), SN9C20X(SOI968, 0x30, HAS_BUTTON)}, + {USB_DEVICE(0x0c45, 0x624e), SN9C20X(SOI968, 0x30, + (HAS_BUTTON | LED_REVERSE))}, {USB_DEVICE(0x0c45, 0x624f), SN9C20X(OV9650, 0x30, 0)}, {USB_DEVICE(0x0c45, 0x6251), SN9C20X(OV9650, 0x30, 0)}, {USB_DEVICE(0x0c45, 0x6253), SN9C20X(OV9650, 0x30, 0)}, _______________________________________________ linuxtv-commits mailing list linuxtv-commits@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linuxtv-commits
