This is an automatic generated email to let you know that the following patch were queued at the http://git.linuxtv.org/v4l-dvb.git tree:
Subject: V4L/DVB: gspca - sn9c20x: HAS_BUTTON flag -> HAS_NO_BUTTON flag Author: Brian Johnson <[email protected]> Date: Sun Apr 18 21:42:40 2010 -0300 Reverse HAS_BUTTON logic since most webcams either have a button or if they don't don't bother to send any interrupts. However I have at least one model that appears to leave the button GPIO floating and can send a bogus interrupt. Signed-off-by: Brian Johnson <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> drivers/media/video/gspca/sn9c20x.c | 16 ++++++++-------- 1 files changed, 8 insertions(+), 8 deletions(-) --- http://git.linuxtv.org/v4l-dvb.git?a=commitdiff;h=80845b73ebc2105460a5537293bfc0a467dedab8 diff --git a/drivers/media/video/gspca/sn9c20x.c b/drivers/media/video/gspca/sn9c20x.c index 1f2e802..67ea896 100644 --- a/drivers/media/video/gspca/sn9c20x.c +++ b/drivers/media/video/gspca/sn9c20x.c @@ -54,7 +54,7 @@ MODULE_LICENSE("GPL"); #define SENSOR_MT9VPRB 20 /* camera flags */ -#define HAS_BUTTON 0x1 +#define HAS_NO_BUTTON 0x1 #define LED_REVERSE 0x2 /* some cameras unset gpio to turn on leds */ #define FLIP_DETECT 0x4 @@ -2339,7 +2339,7 @@ static int sd_int_pkt_scan(struct gspca_dev *gspca_dev, { struct sd *sd = (struct sd *) gspca_dev; int ret = -EINVAL; - if (sd->flags & HAS_BUTTON && len == 1) { + if (!(sd->flags & HAS_NO_BUTTON) && len == 1) { input_report_key(gspca_dev->input_dev, KEY_CAMERA, 1); input_sync(gspca_dev->input_dev); input_report_key(gspca_dev->input_dev, KEY_CAMERA, 0); @@ -2437,9 +2437,9 @@ static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x0c45, 0x6242), SN9C20X(MT9M111, 0x5d, 0)}, {USB_DEVICE(0x0c45, 0x6248), SN9C20X(OV9655, 0x30, 0)}, {USB_DEVICE(0x0c45, 0x624c), SN9C20X(MT9M112, 0x5d, 0)}, - {USB_DEVICE(0x0c45, 0x624e), SN9C20X(SOI968, 0x30, - (HAS_BUTTON | LED_REVERSE))}, - {USB_DEVICE(0x0c45, 0x624f), SN9C20X(OV9650, 0x30, FLIP_DETECT)}, + {USB_DEVICE(0x0c45, 0x624e), SN9C20X(SOI968, 0x30, LED_REVERSE)}, + {USB_DEVICE(0x0c45, 0x624f), SN9C20X(OV9650, 0x30, + (FLIP_DETECT | HAS_NO_BUTTON))}, {USB_DEVICE(0x0c45, 0x6251), SN9C20X(OV9650, 0x30, 0)}, {USB_DEVICE(0x0c45, 0x6253), SN9C20X(OV9650, 0x30, 0)}, {USB_DEVICE(0x0c45, 0x6260), SN9C20X(OV7670, 0x21, 0)}, @@ -2449,14 +2449,14 @@ static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x0c45, 0x627f), SN9C20X(OV9650, 0x30, 0)}, {USB_DEVICE(0x0c45, 0x6280), SN9C20X(MT9M001, 0x5d, 0)}, {USB_DEVICE(0x0c45, 0x6282), SN9C20X(MT9M111, 0x5d, 0)}, - {USB_DEVICE(0x0c45, 0x6288), SN9C20X(OV9655, 0x30, HAS_BUTTON)}, + {USB_DEVICE(0x0c45, 0x6288), SN9C20X(OV9655, 0x30, 0)}, {USB_DEVICE(0x0c45, 0x628c), SN9C20X(MT9M112, 0x5d, 0)}, {USB_DEVICE(0x0c45, 0x628e), SN9C20X(SOI968, 0x30, 0)}, {USB_DEVICE(0x0c45, 0x628f), SN9C20X(OV9650, 0x30, 0)}, {USB_DEVICE(0x0c45, 0x62a0), SN9C20X(OV7670, 0x21, 0)}, {USB_DEVICE(0x0c45, 0x62b0), SN9C20X(MT9VPRB, 0x00, 0)}, {USB_DEVICE(0x0c45, 0x62b3), SN9C20X(OV9655, 0x30, 0)}, - {USB_DEVICE(0x0c45, 0x62bb), SN9C20X(OV7660, 0x21, HAS_BUTTON)}, + {USB_DEVICE(0x0c45, 0x62bb), SN9C20X(OV7660, 0x21, 0)}, {USB_DEVICE(0x0c45, 0x62bc), SN9C20X(HV7131R, 0x11, 0)}, {USB_DEVICE(0x045e, 0x00f4), SN9C20X(OV9650, 0x30, 0)}, {USB_DEVICE(0x145f, 0x013d), SN9C20X(OV7660, 0x21, 0)}, @@ -2467,7 +2467,7 @@ static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0xa168, 0x0611), SN9C20X(HV7131R, 0x11, 0)}, {USB_DEVICE(0xa168, 0x0613), SN9C20X(HV7131R, 0x11, 0)}, {USB_DEVICE(0xa168, 0x0618), SN9C20X(HV7131R, 0x11, 0)}, - {USB_DEVICE(0xa168, 0x0614), SN9C20X(MT9M111, 0x5d, HAS_BUTTON)}, + {USB_DEVICE(0xa168, 0x0614), SN9C20X(MT9M111, 0x5d, 0)}, {USB_DEVICE(0xa168, 0x0615), SN9C20X(MT9M111, 0x5d, 0)}, {USB_DEVICE(0xa168, 0x0617), SN9C20X(MT9M111, 0x5d, 0)}, {} _______________________________________________ linuxtv-commits mailing list [email protected] http://www.linuxtv.org/cgi-bin/mailman/listinfo/linuxtv-commits
