This is an automatic generated email to let you know that the following patch were queued at the http://git.linuxtv.org/v4l-dvb.git tree:
Subject: V4L/DVB: Add FE_CAN_TURBO_FEC Author: Klaus Schmidinger <[email protected]> Date: Thu Jul 1 01:37:34 2010 -0300 Some (North American) providers use a non-standard mode called "8psk turbo fec". Since there is no flag in the driver that would allow an application to determine whether a particular device can handle "turbo fec", the attached patch introduces FE_CAN_TURBO_FEC. Since there is no flag in the SI data that would indicate that a transponder uses "turbo fec", VDR will assume that all 8psk transponders on DVB-S use "turbo fec". Tested-by: Derek Kelly <[email protected]> Signed-off-by: Klaus Schmidinger <[email protected]> Signed-off-by: Douglas Schilling Landgraf <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> drivers/media/dvb/dvb-usb/gp8psk-fe.c | 2 +- include/linux/dvb/frontend.h | 1 + 2 files changed, 2 insertions(+), 1 deletions(-) --- http://git.linuxtv.org/v4l-dvb.git?a=commitdiff;h=3305abb9b5fce83ed526c90e71853c67f8366b4f diff --git a/drivers/media/dvb/dvb-usb/gp8psk-fe.c b/drivers/media/dvb/dvb-usb/gp8psk-fe.c index 7a7f1b2..dbdb534 100644 --- a/drivers/media/dvb/dvb-usb/gp8psk-fe.c +++ b/drivers/media/dvb/dvb-usb/gp8psk-fe.c @@ -349,7 +349,7 @@ static struct dvb_frontend_ops gp8psk_fe_ops = { * FE_CAN_QAM_16 is for compatibility * (Myth incorrectly detects Turbo-QPSK as plain QAM-16) */ - FE_CAN_QPSK | FE_CAN_QAM_16 + FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_TURBO_FEC }, .release = gp8psk_fe_release, diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h index b6cb542..493a2bf 100644 --- a/include/linux/dvb/frontend.h +++ b/include/linux/dvb/frontend.h @@ -62,6 +62,7 @@ typedef enum fe_caps { FE_CAN_8VSB = 0x200000, FE_CAN_16VSB = 0x400000, FE_HAS_EXTENDED_CAPS = 0x800000, /* We need more bitspace for newer APIs, indicate this. */ + FE_CAN_TURBO_FEC = 0x8000000, /* frontend supports "turbo fec modulation" */ FE_CAN_2G_MODULATION = 0x10000000, /* frontend supports "2nd generation modulation" (DVB-S2) */ FE_NEEDS_BENDING = 0x20000000, /* not supported anymore, don't use (frontend requires frequency bending) */ FE_CAN_RECOVER = 0x40000000, /* frontend can recover from a cable unplug automatically */ _______________________________________________ linuxtv-commits mailing list [email protected] http://www.linuxtv.org/cgi-bin/mailman/listinfo/linuxtv-commits
