This is an automatic generated email to let you know that the following patch were queued at the http://git.linuxtv.org/cgit.cgi/media_tree.git tree:
Subject: [media] v4l2-subdev: reorder the v4l2_subdev_video_ops comments Author: Mauro Carvalho Chehab <[email protected]> Date: Sat Aug 22 06:12:35 2015 -0300 The comments for struct v4l2_subdev_video_ops are out of the order as the parameter would appear at struct. This is not a problem for DocBook, but humans find harder to mentally reorder ;) So, put them at the right order. That makes easier to check what's missing, and to put the comments in the right place. Signed-off-by: Mauro Carvalho Chehab <[email protected]> Acked-by: Jonathan Corbet <[email protected]> include/media/v4l2-subdev.h | 18 ++++++++++-------- 1 files changed, 10 insertions(+), 8 deletions(-) --- http://git.linuxtv.org/cgit.cgi/media_tree.git/commit/?id=b84aeb03a886beef39f80e30b76d30a833dd8161 diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h index d9315e5..884a8d7 100644 --- a/include/media/v4l2-subdev.h +++ b/include/media/v4l2-subdev.h @@ -309,6 +309,15 @@ struct v4l2_mbus_frame_desc { /** * struct v4l2_subdev_video_ops - Callbacks used when v4l device was opened * in video mode. + * + * @s_routing: see s_routing in audio_ops, except this version is for video + * devices. + * + * @s_crystal_freq: sets the frequency of the crystal used to generate the + * clocks in Hz. An extra flags field allows device specific configuration + * regarding clock frequency dividers, etc. If not used, then set flags + * to 0. If the frequency is not supported, then -EINVAL is returned. + * * @s_std_output: set v4l2_std_id for video OUTPUT devices. This is ignored by * video input devices. * @@ -321,22 +330,15 @@ struct v4l2_mbus_frame_desc { * @g_tvnorms_output: get v4l2_std_id with all standards supported by the video * OUTPUT device. This is ignored by video capture devices. * - * @s_crystal_freq: sets the frequency of the crystal used to generate the - * clocks in Hz. An extra flags field allows device specific configuration - * regarding clock frequency dividers, etc. If not used, then set flags - * to 0. If the frequency is not supported, then -EINVAL is returned. - * * @g_input_status: get input status. Same as the status field in the v4l2_input * struct. * - * @s_routing: see s_routing in audio_ops, except this version is for video - * devices. - * * @s_dv_timings(): Set custom dv timings in the sub device. This is used * when sub device is capable of setting detailed timing information * in the hardware to generate/detect the video signal. * * @g_dv_timings(): Get custom dv timings in the sub device. + * * @g_mbus_config: get supported mediabus configurations * * @s_mbus_config: set a certain mediabus configuration. This operation is added _______________________________________________ linuxtv-commits mailing list [email protected] http://www.linuxtv.org/cgi-bin/mailman/listinfo/linuxtv-commits
