This is an automatic generated email to let you know that the following patch were queued at the http://git.linuxtv.org/cgit.cgi/media_tree.git tree:
Subject: [media] gspca: Fix ov519 i2c r/w not working when connected to a xhci host Author: Wesley Post <[email protected]> Date: Mon Feb 29 15:39:10 2016 -0300 Fix the ov519 driver not working (unable to talk to the sensor) when plugged into a xhci host. The root cause here is that uhci/ohci/ehci hosts typically will send any pending async requests every milli-second and then go to sleep for the rest if the milli-second, where as xhci hosts send them immediately, causing things to go too fast for the ov519 bridge. This commit adds a few delays fixing this. Signed-off-by: Wesley Post <[email protected]> [[email protected]: Also add delays to w996Xcf.c, as that needs them too] Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> drivers/media/usb/gspca/ov519.c | 9 +++++++++ drivers/media/usb/gspca/w996Xcf.c | 8 ++++++++ 2 files changed, 17 insertions(+) --- http://git.linuxtv.org/cgit.cgi/media_tree.git/commit/?id=f7c7ac480d246f2f625a70f56ea6650710c23f30 diff --git a/drivers/media/usb/gspca/ov519.c b/drivers/media/usb/gspca/ov519.c index c95f32a0c02b..eb668e71a5e8 100644 --- a/drivers/media/usb/gspca/ov519.c +++ b/drivers/media/usb/gspca/ov519.c @@ -2042,6 +2042,9 @@ static void reg_w(struct sd *sd, u16 index, u16 value) if (sd->gspca_dev.usb_err < 0) return; + /* Avoid things going to fast for the bridge with a xhci host */ + udelay(150); + switch (sd->bridge) { case BRIDGE_OV511: case BRIDGE_OV511PLUS: @@ -2103,6 +2106,8 @@ static int reg_r(struct sd *sd, u16 index) req = 1; } + /* Avoid things going to fast for the bridge with a xhci host */ + udelay(150); ret = usb_control_msg(sd->gspca_dev.dev, usb_rcvctrlpipe(sd->gspca_dev.dev, 0), req, @@ -2131,6 +2136,8 @@ static int reg_r8(struct sd *sd, if (sd->gspca_dev.usb_err < 0) return -1; + /* Avoid things going to fast for the bridge with a xhci host */ + udelay(150); ret = usb_control_msg(sd->gspca_dev.dev, usb_rcvctrlpipe(sd->gspca_dev.dev, 0), 1, /* REQ_IO */ @@ -2187,6 +2194,8 @@ static void ov518_reg_w32(struct sd *sd, u16 index, u32 value, int n) *((__le32 *) sd->gspca_dev.usb_buf) = __cpu_to_le32(value); + /* Avoid things going to fast for the bridge with a xhci host */ + udelay(150); ret = usb_control_msg(sd->gspca_dev.dev, usb_sndctrlpipe(sd->gspca_dev.dev, 0), 1 /* REG_IO */, diff --git a/drivers/media/usb/gspca/w996Xcf.c b/drivers/media/usb/gspca/w996Xcf.c index fb9fe2ef3a6f..896f1b2b9179 100644 --- a/drivers/media/usb/gspca/w996Xcf.c +++ b/drivers/media/usb/gspca/w996Xcf.c @@ -79,6 +79,8 @@ static void w9968cf_write_fsb(struct sd *sd, u16* data) value = *data++; memcpy(sd->gspca_dev.usb_buf, data, 6); + /* Avoid things going to fast for the bridge with a xhci host */ + udelay(150); ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0, USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE, value, 0x06, sd->gspca_dev.usb_buf, 6, 500); @@ -99,6 +101,9 @@ static void w9968cf_write_sb(struct sd *sd, u16 value) if (sd->gspca_dev.usb_err < 0) return; + /* Avoid things going to fast for the bridge with a xhci host */ + udelay(150); + /* We don't use reg_w here, as that would cause all writes when bitbanging i2c to be logged, making the logs impossible to read */ ret = usb_control_msg(sd->gspca_dev.dev, @@ -126,6 +131,9 @@ static int w9968cf_read_sb(struct sd *sd) if (sd->gspca_dev.usb_err < 0) return -1; + /* Avoid things going to fast for the bridge with a xhci host */ + udelay(150); + /* We don't use reg_r here, as the w9968cf is special and has 16 bit registers instead of 8 bit */ ret = usb_control_msg(sd->gspca_dev.dev, _______________________________________________ linuxtv-commits mailing list [email protected] http://www.linuxtv.org/cgi-bin/mailman/listinfo/linuxtv-commits
