This is an automatic generated email to let you know that the following patch 
were queued:

Subject: [media] bindings for stih-cec driver
Author:  Benjamin Gaignard <benjamin.gaign...@linaro.org>
Date:    Thu Sep 15 04:37:43 2016 -0300

Add bindings documentation for stih-cec driver.

Signed-off-by: Benjamin Gaignard <benjamin.gaign...@linaro.org>
Acked-by: Peter Griffin <peter.grif...@linaro.org>
Signed-off-by: Hans Verkuil <hans.verk...@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mche...@s-opensource.com>

 .../devicetree/bindings/media/stih-cec.txt         | 25 ++++++++++++++++++++++
 1 file changed, 25 insertions(+)

---

diff --git a/Documentation/devicetree/bindings/media/stih-cec.txt 
b/Documentation/devicetree/bindings/media/stih-cec.txt
new file mode 100644
index 000000000000..71c4b2f4bcef
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/stih-cec.txt
@@ -0,0 +1,25 @@
+STMicroelectronics STIH4xx HDMI CEC driver
+
+Required properties:
+ - compatible : value should be "st,stih-cec"
+ - reg : Physical base address of the IP registers and length of memory
+        mapped region.
+ - clocks : from common clock binding: handle to HDMI CEC clock
+ - interrupts : HDMI CEC interrupt number to the CPU.
+ - pinctrl-names: Contains only one value - "default"
+ - pinctrl-0: Specifies the pin control groups used for CEC hardware.
+ - resets: Reference to a reset controller
+
+Example for STIH407:
+
+sti-cec@094a087c {
+       compatible = "st,stih-cec";
+       reg = <0x94a087c 0x64>;
+       clocks = <&clk_sysin>;
+       clock-names = "cec-clk";
+       interrupts = <GIC_SPI 140 IRQ_TYPE_NONE>;
+       interrupt-names = "cec-irq";
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_cec0_default>;
+       resets = <&softreset STIH407_LPM_SOFTRESET>;
+};

_______________________________________________
linuxtv-commits mailing list
linuxtv-commits@linuxtv.org
https://www.linuxtv.org/cgi-bin/mailman/listinfo/linuxtv-commits

Reply via email to