This is an automatic generated email to let you know that the following patch
were queued:
Subject: [media] media: rc: nuvoton: ignore spurious interrupt when logical
device is being disabled
Author: Heiner Kallweit <hkallwe...@gmail.com>
Date: Sun Jul 31 10:42:55 2016 -0300
When removing module nuvoton-cir I get a fifo overrun warning.
It turned out to be caused by a spurious interrupt when the logical CIR
device is being disabled (although no interrupt source bit being set).
Reading the interrupt status register returns 0xff, therefore the fifo
overrun bit is mistakenly interpreted as being set.
Fix this by ignoring interrupts when interrupt source and status register
reads return 0xff.
Signed-off-by: Heiner Kallweit <hkallwe...@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mche...@s-opensource.com>
drivers/media/rc/nuvoton-cir.c | 9 +++++++++
1 file changed, 9 insertions(+)
---
diff --git a/drivers/media/rc/nuvoton-cir.c b/drivers/media/rc/nuvoton-cir.c
index 00215f343819..0c69536ea813 100644
--- a/drivers/media/rc/nuvoton-cir.c
+++ b/drivers/media/rc/nuvoton-cir.c
@@ -886,6 +886,15 @@ static irqreturn_t nvt_cir_isr(int irq, void *data)
status = nvt_cir_reg_read(nvt, CIR_IRSTS);
iren = nvt_cir_reg_read(nvt, CIR_IREN);
+ /* At least NCT6779D creates a spurious interrupt when the
+ * logical device is being disabled.
+ */
+ if (status == 0xff && iren == 0xff) {
+ spin_unlock_irqrestore(&nvt->nvt_lock, flags);
+ nvt_dbg_verbose("Spurious interrupt detected");
+ return IRQ_HANDLED;
+ }
+
/* IRQ may be shared with CIR WAKE, therefore check for each
* status bit whether the related interrupt source is enabled
*/
_______________________________________________
linuxtv-commits mailing list
linuxtv-commits@linuxtv.org
https://www.linuxtv.org/cgi-bin/mailman/listinfo/linuxtv-commits
