This is an automatic generated email to let you know that the following patch were queued:
Subject: media: rc: partial revert of "media: rc: per-protocol repeat period" Author: Sean Young <[email protected]> Date: Sun Nov 19 16:57:27 2017 -0500 Since commit d57ea877af38 ("media: rc: per-protocol repeat period"), most IR protocols have a lower keyup timeout. This causes problems on the ite-cir, which has default IR timeout of 200ms. Since the IR decoders read the trailing space, with a IR timeout of 200ms, the last keydown will have at least a delay of 200ms. This is more than the protocol timeout of e.g. rc-6 (which is 164ms). As a result the last IR will be interpreted as a new keydown event, and we get two keypresses. Revert the protocol timeout to 250ms, except for cec which needs a timeout of 550ms. Fixes: d57ea877af38 ("media: rc: per-protocol repeat period") Cc: <[email protected]> # 4.14 Reported-by: Matthias Reichl <[email protected]> Signed-off-by: Sean Young <[email protected]> Tested-by: Matthias Reichl <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> drivers/media/rc/rc-main.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) --- diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c index c4b0217bd169..c144b77eac98 100644 --- a/drivers/media/rc/rc-main.c +++ b/drivers/media/rc/rc-main.c @@ -39,41 +39,41 @@ static const struct { [RC_PROTO_UNKNOWN] = { .name = "unknown", .repeat_period = 250 }, [RC_PROTO_OTHER] = { .name = "other", .repeat_period = 250 }, [RC_PROTO_RC5] = { .name = "rc-5", - .scancode_bits = 0x1f7f, .repeat_period = 164 }, + .scancode_bits = 0x1f7f, .repeat_period = 250 }, [RC_PROTO_RC5X_20] = { .name = "rc-5x-20", - .scancode_bits = 0x1f7f3f, .repeat_period = 164 }, + .scancode_bits = 0x1f7f3f, .repeat_period = 250 }, [RC_PROTO_RC5_SZ] = { .name = "rc-5-sz", - .scancode_bits = 0x2fff, .repeat_period = 164 }, + .scancode_bits = 0x2fff, .repeat_period = 250 }, [RC_PROTO_JVC] = { .name = "jvc", .scancode_bits = 0xffff, .repeat_period = 250 }, [RC_PROTO_SONY12] = { .name = "sony-12", - .scancode_bits = 0x1f007f, .repeat_period = 100 }, + .scancode_bits = 0x1f007f, .repeat_period = 250 }, [RC_PROTO_SONY15] = { .name = "sony-15", - .scancode_bits = 0xff007f, .repeat_period = 100 }, + .scancode_bits = 0xff007f, .repeat_period = 250 }, [RC_PROTO_SONY20] = { .name = "sony-20", - .scancode_bits = 0x1fff7f, .repeat_period = 100 }, + .scancode_bits = 0x1fff7f, .repeat_period = 250 }, [RC_PROTO_NEC] = { .name = "nec", - .scancode_bits = 0xffff, .repeat_period = 160 }, + .scancode_bits = 0xffff, .repeat_period = 250 }, [RC_PROTO_NECX] = { .name = "nec-x", - .scancode_bits = 0xffffff, .repeat_period = 160 }, + .scancode_bits = 0xffffff, .repeat_period = 250 }, [RC_PROTO_NEC32] = { .name = "nec-32", - .scancode_bits = 0xffffffff, .repeat_period = 160 }, + .scancode_bits = 0xffffffff, .repeat_period = 250 }, [RC_PROTO_SANYO] = { .name = "sanyo", .scancode_bits = 0x1fffff, .repeat_period = 250 }, [RC_PROTO_MCIR2_KBD] = { .name = "mcir2-kbd", - .scancode_bits = 0xffff, .repeat_period = 150 }, + .scancode_bits = 0xffff, .repeat_period = 250 }, [RC_PROTO_MCIR2_MSE] = { .name = "mcir2-mse", - .scancode_bits = 0x1fffff, .repeat_period = 150 }, + .scancode_bits = 0x1fffff, .repeat_period = 250 }, [RC_PROTO_RC6_0] = { .name = "rc-6-0", - .scancode_bits = 0xffff, .repeat_period = 164 }, + .scancode_bits = 0xffff, .repeat_period = 250 }, [RC_PROTO_RC6_6A_20] = { .name = "rc-6-6a-20", - .scancode_bits = 0xfffff, .repeat_period = 164 }, + .scancode_bits = 0xfffff, .repeat_period = 250 }, [RC_PROTO_RC6_6A_24] = { .name = "rc-6-6a-24", - .scancode_bits = 0xffffff, .repeat_period = 164 }, + .scancode_bits = 0xffffff, .repeat_period = 250 }, [RC_PROTO_RC6_6A_32] = { .name = "rc-6-6a-32", - .scancode_bits = 0xffffffff, .repeat_period = 164 }, + .scancode_bits = 0xffffffff, .repeat_period = 250 }, [RC_PROTO_RC6_MCE] = { .name = "rc-6-mce", - .scancode_bits = 0xffff7fff, .repeat_period = 164 }, + .scancode_bits = 0xffff7fff, .repeat_period = 250 }, [RC_PROTO_SHARP] = { .name = "sharp", .scancode_bits = 0x1fff, .repeat_period = 250 }, [RC_PROTO_XMP] = { .name = "xmp", .repeat_period = 250 }, _______________________________________________ linuxtv-commits mailing list [email protected] https://www.linuxtv.org/cgi-bin/mailman/listinfo/linuxtv-commits
