This is an automatic generated email to let you know that the following patch 
were queued:

Subject: media: dvb_frontend: add physical layer scrambling support
Author:  Athanasios Oikonomou <[email protected]>
Date:    Sat Dec 16 07:23:38 2017 -0500

This commit adds a new property DTV_SCRAMBLING_SEQUENCE_INDEX.

This 18 bit field, when present, carries the index of the DVB-S2 physical
layer scrambling sequence as defined in clause 5.5.4 of EN 302 307.
There is no explicit signalling method to convey scrambling sequence index
to the receiver. If S2 satellite delivery system descriptor is available
it can be used to read the scrambling sequence index (EN 300 468 table 41).

By default, gold scrambling sequence index 0 is used. The valid scrambling
sequence index range is from 0 to 262142.

Increase the DVB API version in order userspace to be aware of the changes.

Signed-off-by: Athanasios Oikonomou <[email protected]>
Acked-by: Ralph Metzler <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>

 .../media/uapi/dvb/fe_property_parameters.rst          | 18 ++++++++++++++++++
 .../uapi/dvb/frontend-property-satellite-systems.rst   |  2 ++
 drivers/media/dvb-core/dvb_frontend.c                  | 12 ++++++++++++
 drivers/media/dvb-core/dvb_frontend.h                  |  5 +++++
 include/uapi/linux/dvb/frontend.h                      |  5 ++++-
 include/uapi/linux/dvb/version.h                       |  2 +-
 6 files changed, 42 insertions(+), 2 deletions(-)

---

diff --git a/Documentation/media/uapi/dvb/fe_property_parameters.rst 
b/Documentation/media/uapi/dvb/fe_property_parameters.rst
index 6eef507fea50..3524dcae4604 100644
--- a/Documentation/media/uapi/dvb/fe_property_parameters.rst
+++ b/Documentation/media/uapi/dvb/fe_property_parameters.rst
@@ -987,3 +987,21 @@ Possible values: 0, 1, LNA_AUTO
 1, LNA on
 
 use the special macro LNA_AUTO to set LNA auto
+
+
+.. _DTV-SCRAMBLING-SEQUENCE-INDEX:
+
+DTV_SCRAMBLING_SEQUENCE_INDEX
+=============================
+
+Used on DVB-S2.
+
+This 18 bit field, when present, carries the index of the DVB-S2 physical
+layer scrambling sequence as defined in clause 5.5.4 of EN 302 307.
+There is no explicit signalling method to convey scrambling sequence index
+to the receiver. If S2 satellite delivery system descriptor is available
+it can be used to read the scrambling sequence index (EN 300 468 table 41).
+
+By default, gold scrambling sequence index 0 is used.
+
+The valid scrambling sequence index range is from 0 to 262142.
diff --git 
a/Documentation/media/uapi/dvb/frontend-property-satellite-systems.rst 
b/Documentation/media/uapi/dvb/frontend-property-satellite-systems.rst
index 1f40399c68ff..2929e6999a7a 100644
--- a/Documentation/media/uapi/dvb/frontend-property-satellite-systems.rst
+++ b/Documentation/media/uapi/dvb/frontend-property-satellite-systems.rst
@@ -60,6 +60,8 @@ following parameters:
 
 -  :ref:`DTV_STREAM_ID <DTV-STREAM-ID>`
 
+-  :ref:`DTV_SCRAMBLING_SEQUENCE_INDEX <DTV-SCRAMBLING-SEQUENCE-INDEX>`
+
 In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>`
 are also valid.
 
diff --git a/drivers/media/dvb-core/dvb_frontend.c 
b/drivers/media/dvb-core/dvb_frontend.c
index ee3ea4dcd9c1..5547b9830bbc 100644
--- a/drivers/media/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb-core/dvb_frontend.c
@@ -982,6 +982,7 @@ static int dvb_frontend_clear_cache(struct dvb_frontend *fe)
        }
 
        c->stream_id = NO_STREAM_ID_FILTER;
+       c->scrambling_sequence_index = 0;/* default sequence */
 
        switch (c->delivery_system) {
        case SYS_DVBS:
@@ -1072,6 +1073,7 @@ static struct dtv_cmds_h dtv_cmds[DTV_MAX_COMMAND + 1] = {
 
        _DTV_CMD(DTV_STREAM_ID, 1, 0),
        _DTV_CMD(DTV_DVBT2_PLP_ID_LEGACY, 1, 0),
+       _DTV_CMD(DTV_SCRAMBLING_SEQUENCE_INDEX, 1, 0),
        _DTV_CMD(DTV_LNA, 1, 0),
 
        /* Get */
@@ -1417,6 +1419,11 @@ static int dtv_property_process_get(struct dvb_frontend 
*fe,
                tvp->u.data = c->stream_id;
                break;
 
+       /* Physical layer scrambling support */
+       case DTV_SCRAMBLING_SEQUENCE_INDEX:
+               tvp->u.data = c->scrambling_sequence_index;
+               break;
+
        /* ATSC-MH */
        case DTV_ATSCMH_FIC_VER:
                tvp->u.data = fe->dtv_property_cache.atscmh_fic_ver;
@@ -1900,6 +1907,11 @@ static int dtv_property_process_set(struct dvb_frontend 
*fe,
                c->stream_id = data;
                break;
 
+       /* Physical layer scrambling support */
+       case DTV_SCRAMBLING_SEQUENCE_INDEX:
+               c->scrambling_sequence_index = data;
+               break;
+
        /* ATSC-MH */
        case DTV_ATSCMH_PARADE_ID:
                fe->dtv_property_cache.atscmh_parade_id = data;
diff --git a/drivers/media/dvb-core/dvb_frontend.h 
b/drivers/media/dvb-core/dvb_frontend.h
index ace0c2fb26c2..2bc25f1e425b 100644
--- a/drivers/media/dvb-core/dvb_frontend.h
+++ b/drivers/media/dvb-core/dvb_frontend.h
@@ -513,6 +513,8 @@ struct dvb_fe_events {
  * @layer.interleaving:         per layer interleaving.
  * @stream_id:         If different than zero, enable substream filtering, if
  *                     hardware supports (DVB-S2 and DVB-T2).
+ * @scrambling_sequence_index: Carries the index of the DVB-S2 physical layer
+ *                             scrambling sequence.
  * @atscmh_fic_ver:    Version number of the FIC (Fast Information Channel)
  *                     signaling data (only ATSC-M/H)
  * @atscmh_parade_id:  Parade identification number (only ATSC-M/H)
@@ -591,6 +593,9 @@ struct dtv_frontend_properties {
        /* Multistream specifics */
        u32                     stream_id;
 
+       /* Physical Layer Scrambling specifics */
+       u32                     scrambling_sequence_index;
+
        /* ATSC-MH specifics */
        u8                      atscmh_fic_ver;
        u8                      atscmh_parade_id;
diff --git a/include/uapi/linux/dvb/frontend.h 
b/include/uapi/linux/dvb/frontend.h
index 9dad6c66cc34..4f9b4551c534 100644
--- a/include/uapi/linux/dvb/frontend.h
+++ b/include/uapi/linux/dvb/frontend.h
@@ -547,7 +547,10 @@ enum fe_interleaving {
 #define DTV_STAT_ERROR_BLOCK_COUNT     68
 #define DTV_STAT_TOTAL_BLOCK_COUNT     69
 
-#define DTV_MAX_COMMAND                DTV_STAT_TOTAL_BLOCK_COUNT
+/* Physical layer scrambling */
+#define DTV_SCRAMBLING_SEQUENCE_INDEX  70
+
+#define DTV_MAX_COMMAND                DTV_SCRAMBLING_SEQUENCE_INDEX
 
 /**
  * enum fe_pilot - Type of pilot tone
diff --git a/include/uapi/linux/dvb/version.h b/include/uapi/linux/dvb/version.h
index 02e32ea83984..2c5cffe6d2a0 100644
--- a/include/uapi/linux/dvb/version.h
+++ b/include/uapi/linux/dvb/version.h
@@ -25,6 +25,6 @@
 #define _DVBVERSION_H_
 
 #define DVB_API_VERSION 5
-#define DVB_API_VERSION_MINOR 10
+#define DVB_API_VERSION_MINOR 11
 
 #endif /*_DVBVERSION_H_*/

_______________________________________________
linuxtv-commits mailing list
[email protected]
https://www.linuxtv.org/cgi-bin/mailman/listinfo/linuxtv-commits

Reply via email to