This is an automatic generated email to let you know that the following patch
were queued:
Subject: media: cx23885: change 887/888 default to 888
Author: Brad Love <b...@nextdimension.cc>
Date: Tue Mar 6 14:15:35 2018 -0500
Proper cx2388x chip type is detected in cx25840 probe, the clock
rate is untouched however in probe. The cx25840 only checks for
non default clock values for 888 and provides custom settings for
25MHz 888. This change ensures that cx23888 chips with default 50MHz
crystals will not get configured as if they have 25MHz crystals. A
cx23887 board will continue to be configured for 25MHz crystal as
there is no custom clock support included for it.
Signed-off-by: Brad Love <b...@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mche...@s-opensource.com>
drivers/media/pci/cx23885/cx23885-core.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
---
diff --git a/drivers/media/pci/cx23885/cx23885-core.c
b/drivers/media/pci/cx23885/cx23885-core.c
index 8afddd6795aa..2c76a0235a58 100644
--- a/drivers/media/pci/cx23885/cx23885-core.c
+++ b/drivers/media/pci/cx23885/cx23885-core.c
@@ -839,10 +839,10 @@ static int cx23885_dev_setup(struct cx23885_dev *dev)
/* Configure the internal memory */
if (dev->pci->device == 0x8880) {
- /* Could be 887 or 888, assume a default */
- dev->bridge = CX23885_BRIDGE_887;
+ /* Could be 887 or 888, assume an 888 default */
+ dev->bridge = CX23885_BRIDGE_888;
/* Apply a sensible clock frequency for the PCIe bridge */
- dev->clk_freq = 25000000;
+ dev->clk_freq = 50000000;
dev->sram_channels = cx23887_sram_channels;
} else
if (dev->pci->device == 0x8852) {
_______________________________________________
linuxtv-commits mailing list
linuxtv-commits@linuxtv.org
https://www.linuxtv.org/cgi-bin/mailman/listinfo/linuxtv-commits
