This is an automatic generated email to let you know that the following patch 
were queued:

Subject: docs: memory-devices: convert ti-emif.txt to ReST
Author:  Mauro Carvalho Chehab <[email protected]>
Date:    Mon Apr 15 18:39:27 2019 -0300

Prepare this file to be moved to a kernel book by converting
it to ReST format and renaming it to ti-emif.rst.

While this is not part of any book, mark it as :orphan:, in order
to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <[email protected]>

 Documentation/memory-devices/ti-emif.rst | 64 ++++++++++++++++++++++++++++++++
 Documentation/memory-devices/ti-emif.txt | 57 ----------------------------
 2 files changed, 64 insertions(+), 57 deletions(-)

---

diff --git a/Documentation/memory-devices/ti-emif.rst 
b/Documentation/memory-devices/ti-emif.rst
new file mode 100644
index 000000000000..c9242294e63c
--- /dev/null
+++ b/Documentation/memory-devices/ti-emif.rst
@@ -0,0 +1,64 @@
+:orphan:
+
+===============================
+TI EMIF SDRAM Controller Driver
+===============================
+
+Author
+======
+Aneesh V <[email protected]>
+
+Location
+========
+driver/memory/emif.c
+
+Supported SoCs:
+===============
+TI OMAP44xx
+TI OMAP54xx
+
+Menuconfig option:
+==================
+Device Drivers
+       Memory devices
+               Texas Instruments EMIF driver
+
+Description
+===========
+This driver is for the EMIF module available in Texas Instruments
+SoCs. EMIF is an SDRAM controller that, based on its revision,
+supports one or more of DDR2, DDR3, and LPDDR2 SDRAM protocols.
+This driver takes care of only LPDDR2 memories presently. The
+functions of the driver includes re-configuring AC timing
+parameters and other settings during frequency, voltage and
+temperature changes
+
+Platform Data (see include/linux/platform_data/emif_plat.h)
+===========================================================
+DDR device details and other board dependent and SoC dependent
+information can be passed through platform data (struct emif_platform_data)
+
+- DDR device details: 'struct ddr_device_info'
+- Device AC timings: 'struct lpddr2_timings' and 'struct lpddr2_min_tck'
+- Custom configurations: customizable policy options through
+  'struct emif_custom_configs'
+- IP revision
+- PHY type
+
+Interface to the external world
+===============================
+EMIF driver registers notifiers for voltage and frequency changes
+affecting EMIF and takes appropriate actions when these are invoked.
+
+- freq_pre_notify_handling()
+- freq_post_notify_handling()
+- volt_notify_handling()
+
+Debugfs
+=======
+The driver creates two debugfs entries per device.
+
+- regcache_dump : dump of register values calculated and saved for all
+  frequencies used so far.
+- mr4 : last polled value of MR4 register in the LPDDR2 device. MR4
+  indicates the current temperature level of the device.
diff --git a/Documentation/memory-devices/ti-emif.txt 
b/Documentation/memory-devices/ti-emif.txt
deleted file mode 100644
index f4ad9a7d0f4b..000000000000
--- a/Documentation/memory-devices/ti-emif.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-TI EMIF SDRAM Controller Driver:
-
-Author
-========
-Aneesh V <[email protected]>
-
-Location
-============
-driver/memory/emif.c
-
-Supported SoCs:
-===================
-TI OMAP44xx
-TI OMAP54xx
-
-Menuconfig option:
-==========================
-Device Drivers
-       Memory devices
-               Texas Instruments EMIF driver
-
-Description
-===========
-This driver is for the EMIF module available in Texas Instruments
-SoCs. EMIF is an SDRAM controller that, based on its revision,
-supports one or more of DDR2, DDR3, and LPDDR2 SDRAM protocols.
-This driver takes care of only LPDDR2 memories presently. The
-functions of the driver includes re-configuring AC timing
-parameters and other settings during frequency, voltage and
-temperature changes
-
-Platform Data (see include/linux/platform_data/emif_plat.h):
-=====================================================================
-DDR device details and other board dependent and SoC dependent
-information can be passed through platform data (struct emif_platform_data)
-- DDR device details: 'struct ddr_device_info'
-- Device AC timings: 'struct lpddr2_timings' and 'struct lpddr2_min_tck'
-- Custom configurations: customizable policy options through
-  'struct emif_custom_configs'
-- IP revision
-- PHY type
-
-Interface to the external world:
-================================
-EMIF driver registers notifiers for voltage and frequency changes
-affecting EMIF and takes appropriate actions when these are invoked.
-- freq_pre_notify_handling()
-- freq_post_notify_handling()
-- volt_notify_handling()
-
-Debugfs
-========
-The driver creates two debugfs entries per device.
-- regcache_dump : dump of register values calculated and saved for all
-  frequencies used so far.
-- mr4 : last polled value of MR4 register in the LPDDR2 device. MR4
-  indicates the current temperature level of the device.

_______________________________________________
linuxtv-commits mailing list
[email protected]
https://www.linuxtv.org/cgi-bin/mailman/listinfo/linuxtv-commits

Reply via email to