This is an automatic generated email to let you know that the following patch were queued:
Subject: media: i2c: ds90ub960: Rename RXPORT_MODE_CSI2_ASYNC to RXPORT_MODE_CSI2_NONSYNC Author: Tomi Valkeinen <[email protected]> Date: Mon Jul 31 16:24:43 2023 +0300 FPD-Link has an operating mode that used to be called "asynchronous" in the hardware documentation, but that has been changed to non-synchronous already quite a while back. The ub960 driver still had one instance of the old naming, so let's rename it. Signed-off-by: Tomi Valkeinen <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> drivers/media/i2c/ds90ub960.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) --- diff --git a/drivers/media/i2c/ds90ub960.c b/drivers/media/i2c/ds90ub960.c index c29db59e340b..f619c23e084a 100644 --- a/drivers/media/i2c/ds90ub960.c +++ b/drivers/media/i2c/ds90ub960.c @@ -415,8 +415,8 @@ enum ub960_rxport_mode { RXPORT_MODE_RAW12_HF = 1, RXPORT_MODE_RAW12_LF = 2, RXPORT_MODE_CSI2_SYNC = 3, - RXPORT_MODE_CSI2_ASYNC = 4, - RXPORT_MODE_LAST = RXPORT_MODE_CSI2_ASYNC, + RXPORT_MODE_CSI2_NONSYNC = 4, + RXPORT_MODE_LAST = RXPORT_MODE_CSI2_NONSYNC, }; enum ub960_rxport_cdr { @@ -1609,7 +1609,7 @@ static unsigned long ub960_calc_bc_clk_rate_ub960(struct ub960_data *priv, div = 1; break; - case RXPORT_MODE_CSI2_ASYNC: + case RXPORT_MODE_CSI2_NONSYNC: mult = 2; div = 5; break; @@ -1633,7 +1633,7 @@ static unsigned long ub960_calc_bc_clk_rate_ub9702(struct ub960_data *priv, case RXPORT_MODE_CSI2_SYNC: return 47187500; - case RXPORT_MODE_CSI2_ASYNC: + case RXPORT_MODE_CSI2_NONSYNC: return 9437500; default: @@ -1840,7 +1840,7 @@ static void ub960_init_rx_port_ub960(struct ub960_data *priv, bc_freq_val = 0; break; - case RXPORT_MODE_CSI2_ASYNC: + case RXPORT_MODE_CSI2_NONSYNC: bc_freq_val = 2; break; @@ -1878,7 +1878,7 @@ static void ub960_init_rx_port_ub960(struct ub960_data *priv, return; case RXPORT_MODE_CSI2_SYNC: - case RXPORT_MODE_CSI2_ASYNC: + case RXPORT_MODE_CSI2_NONSYNC: /* CSI-2 Mode (DS90UB953-Q1 compatible) */ ub960_rxport_update_bits(priv, nport, UB960_RR_PORT_CONFIG, 0x3, 0x0); @@ -1938,7 +1938,7 @@ static void ub960_init_rx_port_ub9702_fpd3(struct ub960_data *priv, fpd_func_mode = 2; break; - case RXPORT_MODE_CSI2_ASYNC: + case RXPORT_MODE_CSI2_NONSYNC: bc_freq_val = 2; fpd_func_mode = 2; break; @@ -2032,7 +2032,7 @@ static void ub960_init_rx_port_ub9702_fpd4(struct ub960_data *priv, bc_freq_val = 6; break; - case RXPORT_MODE_CSI2_ASYNC: + case RXPORT_MODE_CSI2_NONSYNC: bc_freq_val = 2; break; @@ -2098,7 +2098,7 @@ static void ub960_init_rx_port_ub9702(struct ub960_data *priv, return; case RXPORT_MODE_CSI2_SYNC: - case RXPORT_MODE_CSI2_ASYNC: + case RXPORT_MODE_CSI2_NONSYNC: break; } @@ -2444,7 +2444,7 @@ static int ub960_configure_ports_for_streaming(struct ub960_data *priv, /* For the rest, we are only interested in parallel busses */ if (rxport->rx_mode == RXPORT_MODE_CSI2_SYNC || - rxport->rx_mode == RXPORT_MODE_CSI2_ASYNC) + rxport->rx_mode == RXPORT_MODE_CSI2_NONSYNC) continue; if (rx_data[nport].num_streams > 2) @@ -2508,7 +2508,7 @@ static int ub960_configure_ports_for_streaming(struct ub960_data *priv, break; case RXPORT_MODE_CSI2_SYNC: - case RXPORT_MODE_CSI2_ASYNC: + case RXPORT_MODE_CSI2_NONSYNC: if (!priv->hw_data->is_ub9702) { /* Map all VCs from this port to the same VC */ ub960_rxport_write(priv, nport, UB960_RR_CSI_VC_MAP, _______________________________________________ linuxtv-commits mailing list [email protected] https://www.linuxtv.org/cgi-bin/mailman/listinfo/linuxtv-commits
