This is an automatic generated email to let you know that the following patch 
were queued:

Subject: media: ov2680: Allow probing if link-frequencies is absent
Author:  Fabio Estevam <feste...@denx.de>
Date:    Thu Mar 28 19:44:13 2024 -0300

Since commit 63b0cd30b78e ("media: ov2680: Add bus-cfg / endpoint
property verification") the ov2680 no longer probes on a imx7s-warp7:

ov2680 1-0036: error -EINVAL: supported link freq 330000000 not found
ov2680 1-0036: probe with driver ov2680 failed with error -22

As the 'link-frequencies' property is not mandatory, allow the probe
to succeed by skipping the link-frequency verification when the
property is absent.

Cc: sta...@vger.kernel.org
Fixes: 63b0cd30b78e ("media: ov2680: Add bus-cfg / endpoint property 
verification")
Signed-off-by: Fabio Estevam <feste...@denx.de>
Reviewed-by: Hans de Goede <hdego...@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ai...@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-ci...@xs4all.nl>

 drivers/media/i2c/ov2680.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

---

diff --git a/drivers/media/i2c/ov2680.c b/drivers/media/i2c/ov2680.c
index 3e3b7c2b492c..a857763c7984 100644
--- a/drivers/media/i2c/ov2680.c
+++ b/drivers/media/i2c/ov2680.c
@@ -1123,18 +1123,23 @@ static int ov2680_parse_dt(struct ov2680_dev *sensor)
                goto out_free_bus_cfg;
        }
 
+       if (!bus_cfg.nr_of_link_frequencies) {
+               dev_warn(dev, "Consider passing 'link-frequencies' in DT\n");
+               goto skip_link_freq_validation;
+       }
+
        for (i = 0; i < bus_cfg.nr_of_link_frequencies; i++)
                if (bus_cfg.link_frequencies[i] == sensor->link_freq[0])
                        break;
 
-       if (bus_cfg.nr_of_link_frequencies == 0 ||
-           bus_cfg.nr_of_link_frequencies == i) {
+       if (bus_cfg.nr_of_link_frequencies == i) {
                ret = dev_err_probe(dev, -EINVAL,
                                    "supported link freq %lld not found\n",
                                    sensor->link_freq[0]);
                goto out_free_bus_cfg;
        }
 
+skip_link_freq_validation:
        ret = 0;
 out_free_bus_cfg:
        v4l2_fwnode_endpoint_free(&bus_cfg);

Reply via email to