On Wed Jul 15 16:54:08 2026 +0300, Sakari Ailus wrote:
> Really add Sony IMX678 bindings this time. Those were accidentally missed
> from commit 447ea0c26e57 ("dt-bindings: media: i2c: Add Sony IMX678") even
> though the original patch included them.
>
> Fixes: 447ea0c26e57 ("dt-bindings: media: i2c: Add Sony IMX678")
> Signed-off-by: Sakari Ailus <[email protected]>
> Acked-by: Rob Herring (Arm) <[email protected]>
> Acked-by: Jai Luthra <[email protected]>
Patch committed.
Thanks,
Sakari Ailus
.../devicetree/bindings/media/i2c/sony,imx678.yaml | 130 +++++++++++++++++++++
1 file changed, 130 insertions(+)
---
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx678.yaml
b/Documentation/devicetree/bindings/media/i2c/sony,imx678.yaml
new file mode 100644
index 000000000000..098f72544216
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx678.yaml
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2026 Ideas on Board Oy
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx678.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony IMX678 Sensor
+
+maintainers:
+ - Jai Luthra <[email protected]>
+
+description:
+ Sony IMX678 diagonal 8.86 mm (Type 1/1.8) CMOS active pixel type solid-state
+ image sensor with a square pixel array and 8.40M (3856x2180) effective
pixels.
+
+allOf:
+ - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - sony,imx678-aamr
+ - sony,imx678-aaqr
+ - const: sony,imx678
+ description:
+ The IMX678 sensor exists in a colour variant (IMX678-AAQR) and a mono
+ variant (IMX678-AAMR). The variant-specific compatible describes the
+ exact sensor variant, with the generic IMX678 compatible as a fallback.
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ description: |
+ Input clock (INCK). Only the rates listed in the datasheet are supported:
+ 13.5, 18, 24, 27, 36, 37.125, 72, and 74.25 MHz.
+ maxItems: 1
+
+ avdd-supply:
+ description: Analog power supply (3.3V)
+
+ ovdd-supply:
+ description: Interface power supply (1.8V)
+
+ dvdd-supply:
+ description: Digital power supply (1.1V)
+
+ reset-gpios:
+ description: Sensor RESETN (XCLR) GPIO
+ maxItems: 1
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ additionalProperties: false
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ oneOf:
+ - items:
+ - const: 1
+ - const: 2
+ - items:
+ - const: 1
+ - const: 2
+ - const: 3
+ - const: 4
+ - items:
+ - const: 1
+ - const: 2
+ - const: 3
+ - const: 4
+ - const: 5
+ - const: 6
+ - const: 7
+ - const: 8
+
+ required:
+ - data-lanes
+ - link-frequencies
+
+ required:
+ - endpoint
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - avdd-supply
+ - ovdd-supply
+ - dvdd-supply
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ camera@1a {
+ compatible = "sony,imx678-aaqr", "sony,imx678";
+ reg = <0x1a>;
+ clocks = <&imx678_clk>;
+
+ avdd-supply = <&camera_avdd_3v3>;
+ ovdd-supply = <&camera_ovdd_1v8>;
+ dvdd-supply = <&camera_dvdd_1v1>;
+
+ reset-gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+
+ port {
+ imx678: endpoint {
+ remote-endpoint = <&cam>;
+ data-lanes = <1 2 3 4>;
+ link-frequencies = /bits/ 64 <720000000>;
+ };
+ };
+ };
+ };
+...
_______________________________________________
linuxtv-commits mailing list -- [email protected]
To unsubscribe send an email to [email protected]
