Hi Make one logical nic card on the same folder where ur original nic cards.and assign ip to that logical nic.In physical nic you give master- bond pls check the following example for reference. its from a running bong config file.
DEVICE=bond0 BOOTPROTO=none ONBOOT=yes NETWORK=10.1.0.0 NETMASK=255.255.254.0 IPADDR=10.1.0.32 USERCTL=no TYPE=Ethernet PEERDNS=yes GATEWAY=10.1.1.253 IPV6INIT=no DEVICE=eth0 USERCTL=no ONBOOT=yes MASTER=bond0 SLAVE=yes BOOTPROTO=none TYPE=Ethernet PEERDNS=yes IPV6INIT=no HWADDR=00:14:5E:7A:7E:BE DEVICE=eth1 USERCTL=no ONBOOT=yes MASTER=bond0 SLAVE=yes BOOTPROTO=none TYPE=Ethernet PEERDNS=yes IPV6INIT=no HWADDR=00:14:5E:7A:7E:BF On Tue, Jul 8, 2008 at 5:55 PM, ShrikantPatil <[EMAIL PROTECTED]> wrote: > > > --- On Sat, 7/5/08, GSR <[EMAIL PROTECTED]<gowrishankar.rajaiyan%40gmail.com>> > wrote: > From: GSR <[EMAIL PROTECTED]<gowrishankar.rajaiyan%40gmail.com> > > > Subject: [LinuxVadaPav] Re: Ip bonding > To: [email protected] <linuxvadapav%40yahoogroups.com> > Date: Saturday, July 5, 2008, 9:21 AM > > > > > > Can anybody tell me how to configure bonding in linux box > > > > > Check:- > > http://wiki. jboss.org/ wiki/IpBonding > > http://www.linuxfou ndation.org/ en/Net:Bonding > > Thanks > > Shankar********************************************************************Kindly > check , > http://www.howtoforge.com/network_bonding_ubuntu_6.10 > > Thanks and regards,Shrikant > > __****.****_,_.___ > . > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > -- Retheesh [Non-text portions of this message have been removed]
