On Mon, Dec 18, 2017 at 04:53:59PM -0800, Jason Gerecke wrote:
> Signed-off-by: Jason Gerecke <[email protected]>
> Reviewed-by: Peter Hutterer <[email protected]>
> ---
> Changes from v1:
> * Add resolution information to WacomModelDesc table as suggested by
> Ping. Ping also noticed the touch resolution doesn't look sane (for
> this, or any other device), but I haven't had time to investigate...
it's in units/meter (because that's what X uses), so the new entries are
200u/mm which seems sane enough?
Cheers,
Peter
>
> src/wcmUSB.c | 5 +++++
> src/wcmValidateDevice.c | 5 +++++
> 2 files changed, 10 insertions(+)
>
> diff --git a/src/wcmUSB.c b/src/wcmUSB.c
> index 2f96a8a..45277c1 100644
> --- a/src/wcmUSB.c
> +++ b/src/wcmUSB.c
> @@ -295,8 +295,13 @@ static struct WacomModelDesc
> { WACOM_VENDOR_ID, 0x34E, 200000, 200000, &usbCintiqV5, "MobileStudio
> Pro 16" },
> { WACOM_VENDOR_ID, 0x34F, 200000, 200000, &usbCintiqV5, "Cintiq 13 FHD
> Pro" },
> { WACOM_VENDOR_ID, 0x350, 200000, 200000, &usbCintiqV5, "Cintiq 16 UHD
> Pro" },
> + { WACOM_VENDOR_ID, 0x351, 200000, 200000, &usbCintiqV5, "Cintiq Pro
> 24" },
> + { WACOM_VENDOR_ID, 0x352, 200000, 200000, &usbCintiqV5, "Cintiq Pro
> 32" },
> { WACOM_VENDOR_ID, 0x353, 200000, 200000, &usbCintiqV5, "Cintiq 13 FHD
> Pro" }, /* Touch */
> { WACOM_VENDOR_ID, 0x354, 200000, 200000, &usbCintiqV5, "Cintiq 16 UHD
> Pro" }, /* Touch */
> + { WACOM_VENDOR_ID, 0x355, 200000, 200000, &usbCintiqV5, "Cintiq Pro
> 24" }, /* Touch */
> + { WACOM_VENDOR_ID, 0x356, 200000, 200000, &usbCintiqV5, "Cintiq Pro
> 32" }, /* Touch */
> + { WACOM_VENDOR_ID, 0x37C, 200000, 200000, &usbCintiqV5, "Cintiq Pro
> 24" }, /* Pen-only model */
>
> { WACOM_VENDOR_ID, 0x90, 100000, 100000, &usbTabletPC, "TabletPC
> 0x90" },
> { WACOM_VENDOR_ID, 0x93, 100000, 100000, &usbTabletPC, "TabletPC
> 0x93" },
> diff --git a/src/wcmValidateDevice.c b/src/wcmValidateDevice.c
> index 21ccd5f..6546f8c 100644
> --- a/src/wcmValidateDevice.c
> +++ b/src/wcmValidateDevice.c
> @@ -313,6 +313,9 @@ int wcmDeviceTypeKeys(InputInfoPtr pInfo)
> case 0x304:/* Cintiq 13HD */
> case 0x34F:/* Cintiq Pro 13 FHD */
> case 0x350:/* Cintiq Pro 16 UHD */
> + case 0x351:/* Cintiq Pro 24 */
> + case 0x352:/* Cintiq Pro 32 */
> + case 0x37C:/* Cintiq Pro 24 Pen-Only */
> TabletSetFeature(priv->common, WCM_ROTATION);
> /* fall-through */
>
> @@ -325,6 +328,8 @@ int wcmDeviceTypeKeys(InputInfoPtr pInfo)
> case 0x34B:/* MobileStudio Pro 16 Touch */
> case 0x353:/* Cintiq Pro 13 FHD Touch */
> case 0x354:/* Cintiq Pro 13 UHD Touch */
> + case 0x355:/* Cintiq Pro 24 Touch */
> + case 0x356:/* Cintiq Pro 32 Touch */
> case 0x35A:/* DTH-1152*/
> case 0x368:/* DTH-1152 Touch */
> TabletSetFeature(priv->common, WCM_LCD);
> --
> 2.15.1
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Linuxwacom-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-devel
