On Tue, Aug 23, 2011 at 4:41 PM, Peter Hutterer <[email protected]> wrote: > Dependent devices take the parent device's rotation, not hotplugged devices > in general. > > Signed-off-by: Peter Hutterer <[email protected]>
Reviewed-by: Ping Cheng <[email protected]> Ping > --- > man/wacom.man | 5 +++-- > 1 files changed, 3 insertions(+), 2 deletions(-) > > diff --git a/man/wacom.man b/man/wacom.man > index 6cb610e..3d4a143 100644 > --- a/man/wacom.man > +++ b/man/wacom.man > @@ -167,8 +167,9 @@ Tablet PCs with touch feature; "off" for all other models. > rotates the tablet orientation counterclockwise (CCW) or clockwise (CW) or > 180 degrees (HALF). > If you have specific tablet mappings, i.e. TopX/Y or BottomX/Y were set, the > mapping will be > applied before rotation. Rotation must be applied to the parent device > -(usually the stylus), rotation settings on hotplugged devices will be > -ignored. The default is "NONE". > +(usually the stylus), rotation settings on in-driver hotplugged devices (see > +.B DRIVER-INTERNAL DEVICE HOTPLUGGING > +) will be ignored. The default is "NONE". > .TP 4 > .B Option \fI"PressCurve"\fP \fI"x1,y1,x2,y2"\fP > sets pressure curve by control points x1, y1, x2, and y2. Their values are > in range > -- > 1.7.6 > ------------------------------------------------------------------------------ EMC VNX: the world's simplest storage, starting under $10K The only unified storage solution that offers unified management Up to 160% more powerful than alternatives and 25% more efficient. Guaranteed. http://p.sf.net/sfu/emc-vnx-dev2dev _______________________________________________ Linuxwacom-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/linuxwacom-devel
