From: Chris Bagwell <[email protected]> Previous version was missing 2nd gen Bamboo support even though git commit said it was supported.
Signed-off-by: Chris Bagwell <[email protected]> --- 2.6.38/wacom_sys.c | 19 ++------ 2.6.38/wacom_wac.c | 129 +++++++++++++++++++++++++++++++++++++++++++++------ 2.6.38/wacom_wac.h | 1 + 3 files changed, 118 insertions(+), 31 deletions(-) diff --git a/2.6.38/wacom_sys.c b/2.6.38/wacom_sys.c index ab498e4..7e63183 100644 --- a/2.6.38/wacom_sys.c +++ b/2.6.38/wacom_sys.c @@ -315,13 +315,6 @@ static int wacom_parse_hid(struct usb_interface *intf, get_unaligned_le16(&report[i + 3]); i += 4; } - } else if (usage == WCM_DIGITIZER) { - /* max pressure isn't reported - features->pressure_max = (unsigned short) - (report[i+4] << 8 | report[i + 3]); - */ - features->pressure_max = 255; - i += 4; } break; @@ -380,13 +373,6 @@ static int wacom_parse_hid(struct usb_interface *intf, pen = 1; i++; break; - - case HID_USAGE_UNDEFINED: - if (usage == WCM_DESKTOP && finger) /* capacity */ - features->pressure_max = - get_unaligned_le16(&report[i + 3]); - i += 4; - break; } break; @@ -577,7 +563,8 @@ static int wacom_led_control(struct wacom *wacom) if (!buf) return -ENOMEM; - if (wacom->wacom_wac.features.type == WACOM_21UX2) + if (wacom->wacom_wac.features.type == WACOM_21UX2 || + wacom->wacom_wac.features.type == WACOM_24HD) led = (wacom->led.select[1] << 4) | 0x40; led |= wacom->led.select[0] | 0x4; @@ -796,6 +783,7 @@ static int wacom_initialize_leds(struct wacom *wacom) &intuos4_led_attr_group); break; + case WACOM_24HD: case WACOM_21UX2: wacom->led.select[0] = 0; wacom->led.select[1] = 0; @@ -830,6 +818,7 @@ static void wacom_destroy_leds(struct wacom *wacom) &intuos4_led_attr_group); break; + case WACOM_24HD: case WACOM_21UX2: sysfs_remove_group(&wacom->intf->dev.kobj, &cintiq_led_attr_group); diff --git a/2.6.38/wacom_wac.c b/2.6.38/wacom_wac.c index 6b9adc7..a22e778 100644 --- a/2.6.38/wacom_wac.c +++ b/2.6.38/wacom_wac.c @@ -452,7 +452,7 @@ static void wacom_intuos_general(struct wacom_wac *wacom) if ((data[1] & 0xb8) == 0xa0) { t = (data[6] << 2) | ((data[7] >> 6) & 3); if ((features->type >= INTUOS4S && features->type <= INTUOS4L) || - features->type == WACOM_21UX2) { + features->type == WACOM_21UX2 || features->type == WACOM_24HD) { t = (t << 1) | (data[1] & 1); } input_report_abs(input, ABS_PRESSURE, t); @@ -519,6 +519,56 @@ static int wacom_intuos_irq(struct wacom_wac *wacom) input_report_key(input, wacom->tool[1], 0); input_report_abs(input, ABS_MISC, 0); } + } else if (features->type == WACOM_24HD) { + input_report_key(input, BTN_0, (data[6] & 0x01)); + input_report_key(input, BTN_1, (data[6] & 0x02)); + input_report_key(input, BTN_2, (data[6] & 0x04)); + input_report_key(input, BTN_3, (data[6] & 0x08)); + input_report_key(input, BTN_4, (data[6] & 0x10)); + input_report_key(input, BTN_5, (data[6] & 0x20)); + input_report_key(input, BTN_6, (data[6] & 0x40)); + input_report_key(input, BTN_7, (data[6] & 0x80)); + input_report_key(input, BTN_8, (data[8] & 0x01)); + input_report_key(input, BTN_9, (data[8] & 0x02)); + input_report_key(input, BTN_A, (data[8] & 0x04)); + input_report_key(input, BTN_B, (data[8] & 0x08)); + input_report_key(input, BTN_C, (data[8] & 0x10)); + input_report_key(input, BTN_X, (data[8] & 0x20)); + input_report_key(input, BTN_Y, (data[8] & 0x40)); + input_report_key(input, BTN_Z, (data[8] & 0x80)); + + /* + * Three "buttons" are available on the 24HD which are + * physically implemented as a touchstrip. Each button + * is approximately 3 bits wide with a 2 bit spacing. + * The raw touchstrip bits are stored at: + * ((data[3] & 0x1f) << 8) | data[4]) + */ + input_report_key(input, KEY_PROG1, data[4] & 0x07); + input_report_key(input, KEY_PROG2, data[4] & 0xE0); + input_report_key(input, KEY_PROG3, data[3] & 0x1C); + + if (data[1] & 0x80) { + input_report_abs(input, ABS_WHEEL, (data[1] & 0x7f)); + } else { + /* Out of proximity, clear wheel value. */ + input_report_abs(input, ABS_WHEEL, 0); + } + + if (data[2] & 0x80) { + input_report_abs(input, ABS_THROTTLE, (data[2] & 0x7f)); + } else { + /* Out of proximity, clear second wheel value. */ + input_report_abs(input, ABS_THROTTLE, 0); + } + + if (data[1] | data[2] | (data[3] & 0x1f) | data[4] | data[6] | data[8]) { + input_report_key(input, wacom->tool[1], 1); + input_report_abs(input, ABS_MISC, PAD_DEVICE_ID); + } else { + input_report_key(input, wacom->tool[1], 0); + input_report_abs(input, ABS_MISC, 0); + } } else { if (features->type == WACOM_21UX2) { input_report_key(input, BTN_0, (data[5] & 0x01)); @@ -803,25 +853,26 @@ static int wacom_bpt_touch(struct wacom_wac *wacom) return 0; for (i = 0; i < 2; i++) { - int p = data[9 * i + 2]; - bool touch = p && !wacom->shared->stylus_in_proximity; + int offset = (data[1] & 0x80) ? (8 * i) : (9 * i); + bool touch = data[offset + 3] & 0x80; - input_mt_slot(input, i); - input_mt_report_slot_state(input, MT_TOOL_FINGER, touch); /* * Touch events need to be disabled while stylus is * in proximity because user's hand is resting on touchpad * and sending unwanted events. User expects tablet buttons * to continue working though. */ + touch = touch && !wacom->shared->stylus_in_proximity; + + input_mt_slot(input, i); + input_mt_report_slot_state(input, MT_TOOL_FINGER, touch); if (touch) { - int x = get_unaligned_be16(&data[9 * i + 3]) & 0x7ff; - int y = get_unaligned_be16(&data[9 * i + 5]) & 0x7ff; + int x = get_unaligned_be16(&data[offset + 3]) & 0x7ff; + int y = get_unaligned_be16(&data[offset + 5]) & 0x7ff; if (features->quirks & WACOM_QUIRK_BBTOUCH_LOWRES) { x <<= 5; y <<= 5; } - input_report_abs(input, ABS_MT_PRESSURE, p); input_report_abs(input, ABS_MT_POSITION_X, x); input_report_abs(input, ABS_MT_POSITION_Y, y); } @@ -1018,6 +1069,7 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len) case CINTIQ: case WACOM_BEE: case WACOM_21UX2: + case WACOM_24HD: sync = wacom_intuos_irq(wacom_wac); break; @@ -1126,10 +1178,11 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, features->x_fuzz, 0); input_set_abs_params(input_dev, ABS_Y, 0, features->y_max, features->y_fuzz, 0); - input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max, - features->pressure_fuzz, 0); if (features->device_type == BTN_TOOL_PEN) { + input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max, + features->pressure_fuzz, 0); + /* penabled devices have fixed resolution for each model */ input_abs_set_res(input_dev, ABS_X, features->x_resolution); input_abs_set_res(input_dev, ABS_Y, features->y_resolution); @@ -1168,6 +1221,28 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, __set_bit(BTN_TOOL_MOUSE, input_dev->keybit); __set_bit(BTN_STYLUS, input_dev->keybit); __set_bit(BTN_STYLUS2, input_dev->keybit); + + __set_bit(INPUT_PROP_POINTER, input_dev->propbit); + break; + + case WACOM_24HD: + __set_bit(BTN_A, input_dev->keybit); + __set_bit(BTN_B, input_dev->keybit); + __set_bit(BTN_C, input_dev->keybit); + __set_bit(BTN_X, input_dev->keybit); + __set_bit(BTN_Y, input_dev->keybit); + __set_bit(BTN_Z, input_dev->keybit); + + for (i = 0; i < 10; i++) + __set_bit(BTN_0 + i, input_dev->keybit); + + __set_bit(KEY_PROG1, input_dev->keybit); + __set_bit(KEY_PROG2, input_dev->keybit); + __set_bit(KEY_PROG3, input_dev->keybit); + + input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); + input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0); + wacom_setup_cintiq(wacom_wac); break; case WACOM_21UX2: @@ -1190,12 +1265,12 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, for (i = 0; i < 8; i++) __set_bit(BTN_0 + i, input_dev->keybit); - if (wacom_wac->features.type != WACOM_21UX2) { - input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0); - input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0); - } - + input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0); + input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0); input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); + + __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); + wacom_setup_cintiq(wacom_wac); break; @@ -1220,6 +1295,8 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, /* fall through */ case INTUOS: + __set_bit(INPUT_PROP_POINTER, input_dev->propbit); + wacom_setup_intuos(wacom_wac); break; @@ -1235,6 +1312,8 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); wacom_setup_intuos(wacom_wac); + + __set_bit(INPUT_PROP_POINTER, input_dev->propbit); break; case TABLETPC2FG: @@ -1253,26 +1332,40 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, case TABLETPC: __clear_bit(ABS_MISC, input_dev->absbit); + __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); + if (features->device_type != BTN_TOOL_PEN) break; /* no need to process stylus stuff */ /* fall through */ case PL: - case PTU: case DTU: __set_bit(BTN_TOOL_PEN, input_dev->keybit); + __set_bit(BTN_TOOL_RUBBER, input_dev->keybit); __set_bit(BTN_STYLUS, input_dev->keybit); __set_bit(BTN_STYLUS2, input_dev->keybit); + + __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); + break; + + case PTU: + __set_bit(BTN_STYLUS2, input_dev->keybit); /* fall through */ case PENPARTNER: + __set_bit(BTN_TOOL_PEN, input_dev->keybit); __set_bit(BTN_TOOL_RUBBER, input_dev->keybit); + __set_bit(BTN_STYLUS, input_dev->keybit); + + __set_bit(INPUT_PROP_POINTER, input_dev->propbit); break; case BAMBOO_PT: __clear_bit(ABS_MISC, input_dev->absbit); + __set_bit(INPUT_PROP_POINTER, input_dev->propbit); + if (features->device_type == BTN_TOOL_DOUBLETAP) { __set_bit(BTN_LEFT, input_dev->keybit); __set_bit(BTN_FORWARD, input_dev->keybit); @@ -1481,6 +1574,9 @@ static const struct wacom_features wacom_features_0xBB = static const struct wacom_features wacom_features_0xBC = { "Wacom Intuos4 WL", WACOM_PKGLEN_INTUOS, 40840, 25400, 2047, 63, INTUOS4, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; +static const struct wacom_features wacom_features_0xF4 = + { "Wacom Cintiq 24HD", WACOM_PKGLEN_INTUOS, 104480, 65600, 2047, + 63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0x3F = { "Wacom Cintiq 21UX", WACOM_PKGLEN_INTUOS, 87200, 65600, 1023, 63, CINTIQ, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; @@ -1680,6 +1776,7 @@ const struct usb_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0xE3) }, { USB_DEVICE_WACOM(0xE6) }, { USB_DEVICE_WACOM(0x47) }, + { USB_DEVICE_WACOM(0xF4) }, { USB_DEVICE_LENOVO(0x6004) }, { } }; diff --git a/2.6.38/wacom_wac.h b/2.6.38/wacom_wac.h index 27f1d1c..050acae 100644 --- a/2.6.38/wacom_wac.h +++ b/2.6.38/wacom_wac.h @@ -59,6 +59,7 @@ enum { INTUOS4S, INTUOS4, INTUOS4L, + WACOM_24HD, WACOM_21UX2, CINTIQ, WACOM_BEE, -- 1.7.7.4 ------------------------------------------------------------------------------ Learn Windows Azure Live! Tuesday, Dec 13, 2011 Microsoft is holding a special Learn Windows Azure training event for developers. It will provide a great way to learn Windows Azure and what it provides. You can attend the event by watching it streamed LIVE online. Learn more at http://p.sf.net/sfu/ms-windowsazure _______________________________________________ Linuxwacom-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/linuxwacom-devel
