Intuos5 tablets with PTH-* model numbers include a multitouch sensor
which use the same touch reports as the 3rd-generation Bamboo. No
useful information is in the HID descriptor for the touch interface
so hardcoded values are used during setup.
---
drivers/input/tablet/wacom_sys.c | 24 ++++++++++++++
drivers/input/tablet/wacom_wac.c | 63 +++++++++++++++++++++++++++++++++++---
2 files changed, 82 insertions(+), 5 deletions(-)
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index 11b4c05..b1af6c2 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -228,6 +228,9 @@ static int wacom_parse_logical_collection(unsigned char
*report,
* 3rd gen Bamboo Touch no longer define a Digitizer-Finger Pysical
* Collection. Instead they define a Logical Collection with a single
* Logical Maximum for both X and Y.
+ *
+ * Intuos5 touch interface does not contain useful data. We deal with
+ * this after returning from this function.
*/
static int wacom_parse_hid(struct usb_interface *intf,
struct hid_descriptor *hid_desc,
@@ -924,6 +927,27 @@ static int wacom_probe(struct usb_interface *intf, const
struct usb_device_id *i
if (error)
goto fail3;
+ /* Intuos5 has no useful data about its touch interface in its
+ * HID descriptor. If this is the touch interface (wMaxPacketSize
+ * of WACOM_PKGLEN_BBTOUCH3), override the table values.
+ */
+ if (features->type >= INTUOS5S && features->type <= INTUOS5L) {
+ if (endpoint->wMaxPacketSize == WACOM_PKGLEN_BBTOUCH3) {
+ features->device_type = BTN_TOOL_FINGER;
+ features->pktlen = WACOM_PKGLEN_BBTOUCH3;
+
+ features->x_phy =
+ (features->x_max * features->x_resolution) /
100;
+ features->y_phy =
+ (features->y_max * features->y_resolution) /
100;
+
+ features->x_max = 4096;
+ features->y_max = 4096;
+ } else {
+ features->device_type = BTN_TOOL_PEN;
+ }
+ }
+
wacom_setup_device_quirks(features);
strlcpy(wacom_wac->name, features->name, sizeof(wacom_wac->name));
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 86827c7..30067ae 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -321,6 +321,9 @@ static int wacom_intuos_inout(struct wacom_wac *wacom)
/* Enter report */
if ((data[1] & 0xfc) == 0xc0) {
+ if (features->type >= INTUOS5S && features->type <= INTUOS5L)
+ wacom->shared->stylus_in_proximity = true;
+
/* serial number of the tool */
wacom->serial[idx] = ((data[3] & 0x0f) << 28) +
(data[4] << 20) + (data[5] << 12) +
@@ -406,6 +409,9 @@ static int wacom_intuos_inout(struct wacom_wac *wacom)
/* Exit report */
if ((data[1] & 0xfe) == 0x80) {
+ if (features->type >= INTUOS5S && features->type <= INTUOS5L)
+ wacom->shared->stylus_in_proximity = false;
+
/*
* Reset all states otherwise we lose the initial states
* when in-prox next time
@@ -1111,9 +1117,6 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t
len)
case INTUOS4S:
case INTUOS4:
case INTUOS4L:
- case INTUOS5S:
- case INTUOS5:
- case INTUOS5L:
case CINTIQ:
case WACOM_BEE:
case WACOM_21UX2:
@@ -1121,6 +1124,15 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t
len)
sync = wacom_intuos_irq(wacom_wac);
break;
+ case INTUOS5S:
+ case INTUOS5:
+ case INTUOS5L:
+ if (len == WACOM_PKGLEN_BBTOUCH3)
+ sync = wacom_bpt3_touch(wacom_wac);
+ else
+ sync = wacom_intuos_irq(wacom_wac);
+ break;
+
case TABLETPC:
case TABLETPC2FG:
sync = wacom_tpc_irq(wacom_wac, len);
@@ -1191,7 +1203,7 @@ void wacom_setup_device_quirks(struct wacom_features
*features)
/* these device have multiple inputs */
if (features->type == TABLETPC || features->type == TABLETPC2FG ||
- features->type == BAMBOO_PT)
+ features->type == BAMBOO_PT || (features->type >= INTUOS5S &&
features->type <= INTUOS5L))
features->quirks |= WACOM_QUIRK_MULTI_INPUT;
/* quirk for bamboo touch with 2 low res touches */
@@ -1350,13 +1362,54 @@ void wacom_setup_input_capabilities(struct input_dev
*input_dev,
case INTUOS5:
case INTUOS5L:
+ if (features->device_type == BTN_TOOL_PEN) {
+ __set_bit(BTN_7, input_dev->keybit);
+ __set_bit(BTN_8, input_dev->keybit);
+ }
+ /* fall through */
+
+ case INTUOS5S:
+ __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
+
+ if (features->device_type == BTN_TOOL_PEN) {
+ for (i = 0; i < 7; i++)
+ __set_bit(BTN_0 + i, input_dev->keybit);
+
+ input_set_abs_params(input_dev, ABS_DISTANCE, 0,
+ features->distance_max,
+ 0, 0);
+
+ input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
+
+ wacom_setup_intuos(wacom_wac);
+ } else if (features->device_type == BTN_TOOL_FINGER) {
+ __clear_bit(ABS_MISC, input_dev->absbit);
+
+ __set_bit(BTN_TOOL_FINGER, input_dev->keybit);
+ __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
+ __set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
+ __set_bit(BTN_TOOL_QUADTAP, input_dev->keybit);
+
+ input_mt_init_slots(input_dev, 16);
+
+ input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
+ 0, 255, 0, 0);
+
+ input_set_abs_params(input_dev, ABS_MT_POSITION_X,
+ 0, features->x_max,
+ features->x_fuzz, 0);
+ input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
+ 0, features->y_max,
+ features->y_fuzz, 0);
+ }
+ break;
+
case INTUOS4:
case INTUOS4L:
__set_bit(BTN_7, input_dev->keybit);
__set_bit(BTN_8, input_dev->keybit);
/* fall through */
- case INTUOS5S:
case INTUOS4S:
for (i = 0; i < 7; i++)
__set_bit(BTN_0 + i, input_dev->keybit);
--
1.7.9.1
------------------------------------------------------------------------------
Virtualization & Cloud Management Using Capacity Planning
Cloud computing makes use of virtualization - but cloud computing
also focuses on allowing computing to be delivered as a service.
http://www.accelacomm.com/jaw/sfnl/114/51521223/
_______________________________________________
Linuxwacom-devel mailing list
Linuxwacom-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linuxwacom-devel
